Roasted Maple Strat Neck. The frets have been leveled and dressed. Unfinished, sanded to 600 grit! This is the exact neck you will receive. Shaft Wood: Roasted Maple. Fretboard Wood: Roasted Maple. Right / Left Handed: Right-Handed. Neck Back Profile: Modern C. Tuner Hole Size: Modern 10 mm. Fretboard Radius: 9.5. Number of Frets: 22….
Continue reading
Roasted Maple Rosewood Strat Neck. The frets have been leveled and dressed. Unfinished, sanded to 600 grit! This is the exact neck you will receive. Shaft Wood: Roasted Maple. Right / Left Handed: Right-Handed. Neck Back Profile: Modern C. Tuner Hole Size: Modern 10 mm. Fretboard Radius: 9.5. Number of Frets: 22. Inlay Shape: Standard…
Continue reading
Roasted Maple Strat Neck. The frets have been leveled and dressed. Unfinished, sanded to 600 grit! This is the exact neck you will receive. Shaft Wood: Roasted Maple. Fretboard Wood: Roasted Maple. Right / Left Handed: Right-Handed. Neck Back Profile: Modern C. Tuner Hole Size: Modern 10 mm. Fretboard Radius: 9.5. Number of Frets: 22….
Continue reading
These have small discolors in the wood. This will not affect the performance of the instrument. All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. NEW- Stainless Steel Rounded Frets Unfinished Roasted Maple. Stratocaster Guitar Neck These necks are ready to install. Adjust the truss and they are good…
Continue reading
Up for sale is a Fender Stratocaster guitar neck. Unfinished, it has black block inlays. American, not sure of the model. It has some old tape residue on it. Otherwise, the frets are fine. The truss rod works fine; when loosened, the neck has a decent forward bow. When tightened, it gets nearly straight. It…
Continue reading
Genuine WD Music Fender. Maple Unfinished Strat Neck. WD’s newest Fender® Licensed neck design is based on an early 1960’s Stratocaster® to give you a real fat C-shaped contour and fill your hand. They say more mass equals more sustain and if that is the case, being almost an inch thick from the 1st fret…
Continue reading
Description: Allparts Fender Licensed Replacement Neck for Stratocaster. Left-handed orientation; Modern Maple neck with Rosewood fingerboard; 22 jumbo frets. 055″, sanded, unfinished and ready to spray; 12″ radius; Nut width 1-5/8″; Heel width 2-3/16″; Tuning peg hole diameter. 340; Truss rod adjustment at heel; Neck thickness. 84 at first fret. 95 at twelfth fret. Comments:…
Continue reading
Description: Allparts Fender Licensed Replacement Neck for Stratocaster. 043″ V shaping, sanded, unfinished and ready to spray 7.25″ radius Nut width 1-5/8″ Heel width 2-3/16″ Tuning Peg Hole Diameter. 340 Truss Rod adjustment at heel Neck thickness. 92 at first fret. 98 at twelfth fret. Comments: Please note this is a stock photo for purpose…
Continue reading
21-fret unfinished Maple replacement neck for Stratocaster® guitars. 043″ Solid maple neck, sanded, unfinished and ready to spray 7.25″ radius 1-5/8″ nut width Heel width 2-3/16″ Tuning Peg Hole Diameter. 340 Truss Rod adjustment at heel Neck thickness. 84 at first fret. 95at twelfth fret. All necks are made of the highest quality wood in…
Continue reading
Description: Allparts Fender Licensed Replacement Neck for Stratocaster. Left-handed orientation; Modern Maple neck with Rosewood fingerboard; 22 jumbo frets. 055″, sanded, unfinished and ready to spray; 12″ radius; Nut width 1-5/8″; Heel width 2-3/16″; Tuning peg hole diameter. 340; Truss rod adjustment at heel; Neck thickness. 84 at first fret. 95 at twelfth fret. Comments:…
Continue reading