60s stratocaster handmade custom NECK North American flame Maple Fingerboard Material Cocoa Pineapple. (Please refer to the picture for product appearance). Neck Shape: Modern “C”. Fingerboard Material: Cocoa Pineapple. Neck Material: North American flame Maple. Nut Material: Synthetic Bone. Position Inlays: Abalone shell inlay. Truss Rod Nut: 3/16 Hex Adjustment. Truss Rod: Standard (Adjust on…
Continue reading
All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. These have small discolors in the wood. This will not affect the performance of the instrument. Maple STRATOCASTER Guitar Neck. These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. Even…
Continue reading
(Actual Neck in Photo). All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. 21 mm at 1st fret =. 24 mm at 12 fret =. Maple / Rosewood Fretboard. Finish:…
Continue reading
(Actual Neck in Photo). All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. 21 mm at 1st fret =. 24 mm at 12 fret =. Maple / Rosewood Fretboard. Finish:…
Continue reading
Stratocaster Relic Loaded Neck with Fender Pre-CBS Headstock, Logo, Tuners, and String Trees. Frets and nut are in good shape. Nut Width: 1.65 (42mm). Right / Left Handed: Right-Handed. Fretboard Radius: 9.5. Number of Frets: 21. Inlay Shape: Standard Dots. Neck Thickness at 1st Fret: 0.83 (21.2mm). Neck Thickness at 12th Fret: 0.90 (22.9mm). Mounting…
Continue reading
Medium Frets with headstock adjust double action truss rod and a 12-inch radius maple fingerboard. The nut width is 1 11/16 inch wide and peg holes are drilled at 10mm for a modern die cast type tuning machine, but adapter bushings are available to reduce these hole sizes if you would like to mount vintage…
Continue reading
Medium Frets with headstock adjust double action truss rod and a 12-inch radius maple fingerboard. The nut width is 1 11/16 inch wide and peg holes are drilled at 10mm for a modern die cast type tuning machine, but adapter bushings are available to reduce these hole sizes if you would like to mount vintage…
Continue reading
Stratocaster Relic Loaded Neck with Fender Pre-CBS Headstock, Logo, Tuners, and String Trees. Frets and nut are in good shape. Nut Width: 1.65 (42mm). Right / Left Handed: Right-Handed. Fretboard Radius: 9.5. Number of Frets: 21. Inlay Shape: Standard Dots. Neck Thickness at 1st Fret: 0.83 (21.2mm). Neck Thickness at 12th Fret: 0.90 (22.9mm). Mounting…
Continue reading
Yes, Actual Neck in Photos. All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. NEW Maple Stratocaster Guitar Neck These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. 21 mm at 1st fret =. 23 mm at 12 fret…
Continue reading
All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. NEW 1-Piece Maple Stratocaster Guitar Neck These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. 21 mm at 1st fret =. 24 mm at 12 fret =. Sedona Red Stain…
Continue reading