Stratocaster Strat Electric Guitar Neck. Maple/Rosewood MM 2900 R Fender Licensed. Satin, Thin Polyurethane Oil Based Finish. “C” Shape Neck Profile. 2-11/64″Wide x 3/4″ Deep Heel Size. 42MM Installed Nut Width. PPS Flat Bottom Nut Material. Medium 2.4mm Nickel fret Size. Single Adjust Truss Rod at Headstock. 10mm 6 Inline Tuner Hole Size. Pictures are…
Continue reading
By Fender® Replacement 22 Fret Neck For Stratocaster® Soft V. Headstock adjust truss rod location and 8.8 mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Truss Rod Adjustment Tool (Not Included). Allen Head Necks = 4mm. Straight Head Necks = Standard Straight Head Screwdriver. 86 inch thick at the first…
Continue reading
NEW – Fender Licensed Replacement Neck For Strat. Replacement CBS era Stratocaster neck with BIG 70’s headstock and some great modern specs! Nut width, 21 medium jumbo frets with a 12 in. Maple fingerboard radius, clear gloss finish, round C back profile shape. It is drilled at 8.8mm for vintage peg holes to accomodate vintage…
Continue reading
Description: Fender Licensed (by Allparts) Aged Relic Stratocaster Replacement Neck- Model SMVF-C 21 tall frets. 051″, Maple neck with unique aged satin, vintage tinted finish 10″ radius Nut width 1-5/8″ Heel width 2-3/16″ Tuning peg hole diameter. 340 Truss Rod adjustment at heel Neck thickness. 85 at first fret. 95 at twelfth fret Condition: New…
Continue reading
The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson tuning machines. A thin clear satin finish makes this the perfect replacement for your modern…
Continue reading
Our SMO-C-MOD replacement neck for Stratocaster® is? Officially licensed by Fender®? And made to exacting quality standards in Japan. With a 10 fingerboard radius and tall-modern frets, this neck offers a great balance of speed and comfort. Players will enjoy a faster feel and easier string bending than a vintage-spec neck, without the apparent “flatness”…
Continue reading
NEW – Fender Licensed Replacement Maple Neck For Strat. Replacement Stratocaster neck with 22 medium jumbo frets, 12″ radius, 1-11/16″ nut width, clear satin finish. Double action truss rod with headstock adjustment location. Ebony finger board with 10mm peg holes drilled for a modern sealed or diecast tuning machine. Will also accept adapter bushings. Due…
Continue reading
WD® Licensed By Fender® Replacement 22 Fret Neck For Stratocaster® Modern C- MAPLE W/ EBONY FINGERBOARD Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast…
Continue reading
Description: Allparts Fender Licensed Replacement Neck for Stratocaster. Maple neck with Rosewood Veneer fingerboard; 21 frets. 051″; sanded, unfinished and ready to spray; 7.25″ radius; Nut width 1-5/8″; Heel width 2-3/16″; Tuning peg hole diameter. 340; Truss rod adjustment at heel; Neck thickness. 85 at first fret. 95 at twelfth fret. Unless otherwise noted, all…
Continue reading
NEW – Fender Licensed Replacement Neck For Strat – #SMO-C. Solid Maple, Sanded, Unfinished and Ready to Spray! 1-5/8″ Nut Width, 2-3/16″ Heel Width. 340 Tuner Hole Diameter. Truss Rod Adjustment at Heel. 84 Thick at 1st Fret. 94 Thick at 12th Fret. THE ABOVE PICTURES ARE ACTUAL PICTURES OF YOUR ITEM! Thanks for your…
Continue reading