Musikraft Stratocaster Neck Only Fender Licensed Quarter sawn maple From Japan. Quarter sawn maple neck. Fingerboard is Coney Island boardwalk wood (Brazilian Walnut). Scale: 25.5 inches. Fingerboard: 21 frets, 10 R (254mm). Fret Size:6105 Medium approx. Heel width: 55.5mm. Nut Width: 42.8mm (TUSQ). There is plenty of room on the truss rod, and there is…
Continue reading
Stratocaster Strat Electric Guitar Neck. Maple/Rosewood MM 2900 R Fender Licensed. Satin, Thin Polyurethane Oil Based Finish. “C” Shape Neck Profile. 2-11/64″Wide x 3/4″ Deep Heel Size. 42MM Installed Nut Width. PPS Flat Bottom Nut Material. Medium 2.4mm Nickel fret Size. Single Adjust Truss Rod at Headstock. 10mm 6 Inline Tuner Hole Size. Pictures are…
Continue reading
By Fender® Replacement 22 Fret Neck For Stratocaster® Soft V. Headstock adjust truss rod location and 8.8 mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Truss Rod Adjustment Tool (Not Included). Allen Head Necks = 4mm. Straight Head Necks = Standard Straight Head Screwdriver. 86 inch thick at the first…
Continue reading
NEW – Fender Licensed Replacement Neck For Strat. Replacement CBS era Stratocaster neck with BIG 70’s headstock and some great modern specs! Nut width, 21 medium jumbo frets with a 12 in. Maple fingerboard radius, clear gloss finish, round C back profile shape. It is drilled at 8.8mm for vintage peg holes to accomodate vintage…
Continue reading
Description: Fender Licensed (by Allparts) Aged Relic Stratocaster Replacement Neck- Model SMVF-C 21 tall frets. 051″, Maple neck with unique aged satin, vintage tinted finish 10″ radius Nut width 1-5/8″ Heel width 2-3/16″ Tuning peg hole diameter. 340 Truss Rod adjustment at heel Neck thickness. 85 at first fret. 95 at twelfth fret Condition: New…
Continue reading
The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson tuning machines. A thin clear satin finish makes this the perfect replacement for your modern…
Continue reading
Our SMO-C-MOD replacement neck for Stratocaster® is? Officially licensed by Fender®? And made to exacting quality standards in Japan. With a 10 fingerboard radius and tall-modern frets, this neck offers a great balance of speed and comfort. Players will enjoy a faster feel and easier string bending than a vintage-spec neck, without the apparent “flatness”…
Continue reading
NEW – Fender Licensed Replacement Maple Neck For Strat. Replacement Stratocaster neck with 22 medium jumbo frets, 12″ radius, 1-11/16″ nut width, clear satin finish. Double action truss rod with headstock adjustment location. Ebony finger board with 10mm peg holes drilled for a modern sealed or diecast tuning machine. Will also accept adapter bushings. Due…
Continue reading
WD® Licensed By Fender® Replacement 22 Fret Neck For Stratocaster® Modern C- MAPLE W/ EBONY FINGERBOARD Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast…
Continue reading
Description: Allparts Fender Licensed Replacement Neck for Stratocaster. Maple neck with Rosewood Veneer fingerboard; 21 frets. 051″; sanded, unfinished and ready to spray; 7.25″ radius; Nut width 1-5/8″; Heel width 2-3/16″; Tuning peg hole diameter. 340; Truss rod adjustment at heel; Neck thickness. 85 at first fret. 95 at twelfth fret. Unless otherwise noted, all…
Continue reading