Used Fender Road Worn Telecaster Deluxe maple neck. 9.5″ radius, medium “C shape. Frets are in good shape, truss rod works and the neck is currently set up straight. Has all the scratches, finish checking and marks that genuine Road Worn Fende’s are supposed to have. This neck was stamped USED at the factory. The…
Continue reading
The neck in the photo is the one you will receive. All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. Hand Rubbed Tung Oil. 1-Piece Roasted Stratocaster Guitar Neck. These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. Even…
Continue reading
NEW – Fender Licensed Replacement Strat Neck. Solid Maple With Vintage Tinted Nitrocellulose Finish. 051, 7.25 Radius. 340 Diameter Tuner Holes. 1-5/8″ Nut Width, 2-3/16″ Heel Width. 89 Thick at 1st Fret. 97 Thick at 12th Fret. Truss Rod Adjustment at Heel. Wood grain varies from neck to neck. Your neck may differ slightly from…
Continue reading
NEW – Fender Licensed Replacement Strat Neck. Solid Maple With Vintage Tinted Nitrocellulose Finish. 21 Vintage Style Tall Frets. 340 Diameter Tuner Holes. 1-5/8″ Nut Width, 2-3/16″ Heel Width. 85 Thick at 1st Fret. 95 Thick at 12th Fret. Truss Rod Adjustment at Heel. Wood grain varies from neck to neck. Your neck may differ…
Continue reading
Fender Japan Heritage Stratocaster Neck Only JD Serial Lacquer Finish Excellent+. More than 8090% frets remaining. Neck is visually straight. Rod has never been turned. It is in very good condition with no major trauma. Lacquer coated, so we expect it to age well in the future. Neck end width 55mm. Customer service and satisfaction…
Continue reading
Tinted nitrocellulose finish 21 tall frets Maple with black dot inlays 10″ radius Nut width 1-5/8″ Heel width 2-3/16″ Tuning peg hole diameter 11/32″ Truss Rod adjustment at heel Neck thickness. 84 at first fret.
Continue reading
Allparts 22-fret maple replacement neck for Stratocaster®. Tinted polyurethane finish 22 jumbo frets Maple w/black dot inlays 12″ radius Nut width 1-5/8″ Heel width 2-3/16″ Tuning peg hole diameter 11/32″ Truss rod adjustment at heel Neck thickness. 85 at first fret. 95 at twelfth fret. Allparts necks are made of the highest quality wood in…
Continue reading
Allparts nitro finish rosewood replacement neck for vintage Stratocaster®. Tinted nitrocellulose finish 21 tall frets Maple, rosewood fingerboard w/white dot inlays 10″ radius Nut width 1-5/8″ Heel width 2-3/16″ Tuning peg hole diameter 11/32″ Truss Rod adjustment at heel Neck thickness. 85 at first fret. 95 at twelfth fret. Allparts necks are made of the…
Continue reading
Allparts large 70s CBS style headstock maple replacement neck for vintage Stratocaster®. Tinted polyurethane finish 21 vintage frets Maple w/black dot inlays 7.25″ radius Nut width 1-5/8″ Heel width 2-3/16″ Tuning peg hole diameter 11/32″ Bullet truss rod adjustment at headstock Neck thickness. 87 at first fret. 96 at twelfth fret. Allparts necks are made…
Continue reading