This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. Please note this listing won’t include the bone nut, tuners or decal set up or installation. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I you want a detailed relic job, please message me. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. I have the 2 pcs available and 1 piece, also the 70’s style too (bullet).