https://fenderstratocasterneck.com Mon, 09 Nov 2026 12:45:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/10/14/new-fender-made-in-japan-traditional-ii-50s-stratocaster-neck-maple-687/ https://fenderstratocasterneck.com/2026/10/14/new-fender-made-in-japan-traditional-ii-50s-stratocaster-neck-maple-687/#comments Wed, 14 Oct 2026 13:04:51 +0000 https://fenderstratocasterneck.com/2026/10/14/new-fender-made-in-japan-traditional-ii-50s-stratocaster-neck-maple-687/



This is the exact neck you’ll receive! Only removed from original packaging for inspection/photos. Serial Number – JD23030687. Weight – 1lbs 4.3oz. Fusing Fender’s traditional aesthetics with sophisticated Japanese craftsmanship the made in Japan Traditional II series necks offer the sought after and iconic feel of Fender MIJ instruments. Crafted in the same facility as the Made in Japan series instruments, the Traditional II 50’s Stratocaster Neck features a classic “U” shape and incorporates a flatter 9.5 radius and 21 vintage frets on a maple fingerboard. A gloss urethane finish provides a classic performance. This replacement neck is for a Fender® or Squier® by Fender guitar. Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender. Com.

]]> https://fenderstratocasterneck.com/2026/10/14/new-fender-made-in-japan-traditional-ii-50s-stratocaster-neck-maple-687/feed/ 0 https://fenderstratocasterneck.com/2026/10/06/fender-made-in-japan-traditional-ii-60s-stratocaster-replacement-neck-rosewood/ https://fenderstratocasterneck.com/2026/10/06/fender-made-in-japan-traditional-ii-60s-stratocaster-replacement-neck-rosewood/#comments Tue, 06 Oct 2026 12:40:41 +0000 https://fenderstratocasterneck.com/2026/10/06/fender-made-in-japan-traditional-ii-60s-stratocaster-replacement-neck-rosewood/




The Made in Japan Traditional II’60s Stratocaster replacement neck brings Fender’s iconic feel and tone with superb Japanese craftsmanship. Crafted in the same Japanese facility as Fender’s revered Made in Japan instruments, this neck captures the vintage vibe with its classic U profile and vintage frets on a rosewood fingerboard. Comfortable U Neck Profile for All-Night Jams The vintage-style U neck profile provides comfort during long practice sessions and all-night jams. Its smooth contour nestles easily in your hand. Lightning-fast riffs and intricate solos flow effortlessly across the 21 vintage frets. This is a neck made for players who want to get lost in the music. Vintage Specs Bring Out Your Inner Hendrix Its 9. Fender Made in Japan Traditional II 60’s Stratocaster Replacement Neck Rosewood. Comfortable U Neck Profile for All-Night Jams. The vintage-style U neck profile provides comfort during long practice sessions and all-night jams. Vintage Specs Bring Out Your Inner Hendrix. Its 9.5 radius rosewood fingerboard with 21 vintage frets echoes the specs of classic 1960s Fender guitars. Unleash your inner Hendrix as you shred up and down the smooth rosewood fingerboard. The vintage frets promote effortless bending and vibrato techniques to put your own stamp on those classic Strat tones. A gloss urethane finish also provides classic feel, and the slimmer 1-5/8 (41 mm) nut width makes for easy playability. Upgrade Your Fender With Superior Japanese Craftsmanship. This replacement neck is made for Fender and Squier by Fender guitars. Give your Strat a premium upgrade with the sophisticated craftsmanship of Fender’s Japanese facility. Installation may require professional setup and adjustments. Consult your local authorized Fender service center for expert installation. Gloss Urethane Finish for Speed. The gloss urethane finish looks great while promoting fast, fluid playability. Your hands will fly across the satin smooth surface. The Traditional II 60s Stratocaster neck will inspire your creativity to soar to new heights. For example, if your order is placed AND paid for at 1 p. Store Policies If you’re not satisfied, neither are we. It’s that simple. Be in brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings, or scrapes on the instrument or collateral materials.

]]> https://fenderstratocasterneck.com/2026/10/06/fender-made-in-japan-traditional-ii-60s-stratocaster-replacement-neck-rosewood/feed/ 0 https://fenderstratocasterneck.com/2026/08/01/fender-traditional-ii-60s-stratocaster-neck-with-upgraded-guyker-locking-tuners/ https://fenderstratocasterneck.com/2026/08/01/fender-traditional-ii-60s-stratocaster-neck-with-upgraded-guyker-locking-tuners/#comments Sat, 01 Aug 2026 19:54:46 +0000 https://fenderstratocasterneck.com/2026/08/01/fender-traditional-ii-60s-stratocaster-neck-with-upgraded-guyker-locking-tuners/













This is one of if not my favorite guitar necks I have ever used. Amazing smooth playing that fits so comfortably in my hands. I was able to do stuff I wasn’t beforehand. Overall probably one of the best MIJ necks on the market. Slab East Indian rosewood fretboard 21 vintage-style frets Upgraded Guyker locking tuners Fully functioning truss rod.

]]> https://fenderstratocasterneck.com/2026/08/01/fender-traditional-ii-60s-stratocaster-neck-with-upgraded-guyker-locking-tuners/feed/ 0 https://fenderstratocasterneck.com/2026/05/19/fender-japan-traditional-ii-60s-strat-maple-rwd-neck21-frets9-5-rdsunew/ https://fenderstratocasterneck.com/2026/05/19/fender-japan-traditional-ii-60s-strat-maple-rwd-neck21-frets9-5-rdsunew/#comments Tue, 19 May 2026 15:36:48 +0000 https://fenderstratocasterneck.com/2026/05/19/fender-japan-traditional-ii-60s-strat-maple-rwd-neck21-frets9-5-rdsunew/












Fender® Japan Traditional II 60`s Strat Maple Rosewood Neck21 Frets9.5″ RDS”UNew. Brand New Genuine Fender Japan Traditional ll 60`s. Stratocaster Maple With Rosewood Fingerboard Neck. 8.5mm Peg Holes. This is a new neck from the factory & is not from a parted out Strat. The neck in the pics is the same neck you will receive. Gloss Urethane Headstock Face And Gloss Urethane. Fusing Fender’s traditional aesthetics with sophisticated Japanese craftsmanship the made in Japan Traditional II series necks offer the sought after and iconic feel of Fender MIJ instruments. Crafted in the same facility as the Made in Japan series instruments, the Traditional II 60’s Stratocaster Neck features a classic “U” shape and incorporates a flatter 9.5 radius and vintage frets on a Rosewood fingerboard. A gloss urethane finish provides a classic performance. Specifications and Features: Neck Material: Maple And Rosewood Neck Finish: Gloss Urethane Neck Shape: “U” Shape Neck Thickness: 1st Fret. 846 (21.5 mm), 12th Fret. 905″ (23.0 mm) Neck Mounting: 4-Bolt Fingerboard Radius: 9.5″ (241 mm) Fingerboard Material: Rosewood Position Inlays: White Dot Side Dots. Number of Frets: 21 Truss Rod: Vintage-Style Heel Adjust Truss Rod Nut: Vintage-Style Slotted String Nut: Bone Nut Width: 1.615″ (41.02 mm) Nut Material: Bone Fret Size: Vintage Scale Length: 25.5″ (648 mm). Please read it thoroughly & reference the pictures. Make certain it is the exact item you want/need before purchasing. Electricguitarparts is a Fender and FMIC subsidiaries authorized dealer. Dealer name: Ultimate Music Direct. I do not dropship, I only list items that are in stock at my location. In the event you receive a defective item or the wrong item please contact me immediately. Get Supersized Images & Free Image Hosting. Create your brand with Auctiva’s. Attention Sellers – Get Templates Image Hosting, Scheduling at Auctiva. Track Page Views With.

]]> https://fenderstratocasterneck.com/2026/05/19/fender-japan-traditional-ii-60s-strat-maple-rwd-neck21-frets9-5-rdsunew/feed/ 0 https://fenderstratocasterneck.com/2025/06/30/blue-gibson-aaa-flame-top-les-paul-traditional-v-gibsonlespaul-electricguitar-gibsonguitars/ https://fenderstratocasterneck.com/2025/06/30/blue-gibson-aaa-flame-top-les-paul-traditional-v-gibsonlespaul-electricguitar-gibsonguitars/#comments Tue, 01 Jul 2025 03:31:33 +0000 https://fenderstratocasterneck.com/2025/06/30/blue-gibson-aaa-flame-top-les-paul-traditional-v-gibsonlespaul-electricguitar-gibsonguitars/ ]]> https://fenderstratocasterneck.com/2025/06/30/blue-gibson-aaa-flame-top-les-paul-traditional-v-gibsonlespaul-electricguitar-gibsonguitars/feed/ 0 https://fenderstratocasterneck.com/2024/11/26/fender-made-in-japan-traditional-ii60s-stratocaster-neck-rosewood/ https://fenderstratocasterneck.com/2024/11/26/fender-made-in-japan-traditional-ii60s-stratocaster-neck-rosewood/#comments Tue, 26 Nov 2024 19:03:56 +0000 https://fenderstratocasterneck.com/2024/11/26/fender-made-in-japan-traditional-ii60s-stratocaster-neck-rosewood/







Slick’60s Style – Upgraded with Modern Performance Treat your Telecaster, Stratocaster, or DIY Partscaster to a vintage-style makeover courtesy of Fender’s Traditional II’60s series of replacement necks. Crafted to the highest standards in Japan, this maple neck comes carved into a classic “C” profile to capture the timeless feel of a golden-age vintage Fender. Head on over to the rosewood fingerboard to be greeted by a 9.5-inch radius and vintage-style frets – an old-meets-new duo that splits the difference between bend-friendly performance and retro feel. And while plenty of Sweetwater’s vintage enthusiasts champion old-school nitro, this neck’s gloss urethane coat delivers an equally slick feel with far greater durability than any vintage-correct Fender finish. Fender’s MIJ and CIJ instruments are among the most coveted in the company’s history – Traditional II’60s necks live more than up to those lofty standards, pairing vintage style and feel with all. Sweetwater is an Authorized Fender Dealer. Fender Made In Japan Traditional II’60s Stratocaster Neck – Rosewood. Maple Stratocaster Neck with “U” Profile, Rosewood Fingerboard, 9.5 Radius, and Vintage Frets. Slick’60s Style – Upgraded with Modern Performance. Treat your Telecaster, Stratocaster, or DIY Partscaster to a vintage-style makeover courtesy of Fender’s Traditional II’60s series of replacement necks. Fender’s MIJ and CIJ instruments are among the most coveted in the company’s history – Traditional II’60s necks live more than up to those lofty standards, pairing vintage style and feel with all the best of modern playability. Note: Every neck and guitar is different, and a final setup, including filing the nut slots and a final fret leveling, may be required after installation on your guitar. Call your Sweetwater Sales Engineer with any questions you have about upgrading or replacing the neck on your Fender guitar or bass. Fender Traditional II’60s Stratocaster Neck Features. Vintage-style replacement/upgrade neck for your compatible Fender or Squier Stratocaster. Crafted in the same world-class factory as Fender’s Japanese-made guitars. Maple shaft carved into a comfortable Classic “U” profile neck inspired by the Strats of the 1960s. Modernized 9.5-inch radius offers a slicker feel and cleaner sound when bending in the upper register. Comfortable old-school vintage frets. Durable gloss urethane finish. Made in Japan Traditional II 60’s Guitar Neck. 99.95% warehouse accuracy. More than 30 years in business. Free tech support from audio experts.

]]> https://fenderstratocasterneck.com/2024/11/26/fender-made-in-japan-traditional-ii60s-stratocaster-neck-rosewood/feed/ 0 https://fenderstratocasterneck.com/2024/08/17/fender-made-in-japan-traditional-ii-stratocaster-neck/ https://fenderstratocasterneck.com/2024/08/17/fender-made-in-japan-traditional-ii-stratocaster-neck/#comments Sat, 17 Aug 2024 13:53:20 +0000 https://fenderstratocasterneck.com/2024/08/17/fender-made-in-japan-traditional-ii-stratocaster-neck/







Fender Made in Japan Traditional II Stratocaster Neck.

]]> https://fenderstratocasterneck.com/2024/08/17/fender-made-in-japan-traditional-ii-stratocaster-neck/feed/ 0 https://fenderstratocasterneck.com/2024/05/15/fender-made-in-japan-traditional-ii-60s-stratocaster-neck-00131/ https://fenderstratocasterneck.com/2024/05/15/fender-made-in-japan-traditional-ii-60s-stratocaster-neck-00131/#comments Wed, 15 May 2024 23:04:40 +0000 https://fenderstratocasterneck.com/2024/05/15/fender-made-in-japan-traditional-ii-60s-stratocaster-neck-00131/



WELCOME TO EMPIRE MUSIC. Since 2002, Empire Music has aimed to deliver the finest in-store shopping experience. We promise to deliver the highest quality products and services to all of our customers. Fender Made in Japan Traditional II 60’s Stratocaster Neck, 21 Vintage Frets, 9.5 Radius, U Shape, Rosewood. Neck pictured is the actual neck that you will receive. Fusing Fender’s traditional aesthetics with sophisticated Japanese craftsmanship the made in Japan Traditional II series necks offer the sought after and iconic feel of Fender MIJ instruments. Crafted in the same facility as the Made in Japan series instruments, the Traditional II 60’s Stratocaster Neck features a classic “U” shape and incorporates a flatter 9.5 radius and vintage frets on a rosewood fingerboard. A gloss urethane finish provides classic feel and a slimmer 1-5/8 (41 mm) nut width makes for easy playability. This replacement neck is for a Fender® or Squier® by Fender guitar. Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender. Com. COUNTRY OF ORIGIN:JP. NECK MATERIAL:Maple with Walnut Stripe. NECK FINISH:Gloss Urethane. NECK SHAPE:”U” Shape. NECK THICKNESS:1st Fret. 846 (21.5 mm), 12th Fret. 905 (23.0 mm). FINGERBOARD RADIUS:9.5 (241 mm). POSITION INLAYS:White Dot. NUMBER OF FRETS:21. TRUSS ROD:Vintage-Style Heel Adjust. TRUSS ROD NUT:Vintage-Style Slotted. NUT WIDTH:1.615 (41.02 mm). TUNER MOUNTING CONFIG:Vintage-Style 2-Screw. 540 (13.71 mm). PEG HOLE DIAMETER:9.2 mm. SCALE LENGTH:25.5 (648 mm).

]]> https://fenderstratocasterneck.com/2024/05/15/fender-made-in-japan-traditional-ii-60s-stratocaster-neck-00131/feed/ 0 https://fenderstratocasterneck.com/2024/05/10/fender-made-in-japan-traditional-ii-60s-rosewood-strat-neck-21-frets-u-shape/ https://fenderstratocasterneck.com/2024/05/10/fender-made-in-japan-traditional-ii-60s-rosewood-strat-neck-21-frets-u-shape/#comments Fri, 10 May 2024 22:44:08 +0000 https://fenderstratocasterneck.com/2024/05/10/fender-made-in-japan-traditional-ii-60s-rosewood-strat-neck-21-frets-u-shape/




See all eligible items. (United States Orders Only). Fender Made-in-Japan Traditional II 60’s Rosewood Strat Neck, 21 Frets, U Shape. Made in Japan Traditional II 60’s Stratocaster® Neck, 21 Vintage Frets, 9.5 Radius, U Shape, Rosewood. Fusing Fender’s traditional aesthetics with sophisticated Japanese craftsmanship the made in Japan Traditional II series necks offer the sought after and iconic feel of Fender MIJ instruments. Crafted in the same facility as the Made in Japan series instruments, the Traditional II 60’s Stratocaster Neck features a classic “U” shape and incorporates a flatter 9.5 radius and vintage frets on a rosewood fingerboard. A gloss urethane finish provides a classic performance. Stratocaster neck with walnut stripe. 9.5″-radius and “U shape neck profile. Rosewood fingerboard with 21 vintage frets and white dot inlays.

]]> https://fenderstratocasterneck.com/2024/05/10/fender-made-in-japan-traditional-ii-60s-rosewood-strat-neck-21-frets-u-shape/feed/ 0 https://fenderstratocasterneck.com/2024/02/02/fender-japan-mij-traditional-ii-50s-stratocaster-2020-neck-only-maple-58/ https://fenderstratocasterneck.com/2024/02/02/fender-japan-mij-traditional-ii-50s-stratocaster-2020-neck-only-maple-58/#comments Sat, 03 Feb 2024 02:50:43 +0000 https://fenderstratocasterneck.com/2024/02/02/fender-japan-mij-traditional-ii-50s-stratocaster-2020-neck-only-maple-58/











Please see pictures for details. 9.5 inch radius maple fingerboard. 21 vintage style frets. The operation works well. The sound output is also no problem. And the operation of each button is also comfortable. If that, please let us know within 3 days you got the item.

]]> https://fenderstratocasterneck.com/2024/02/02/fender-japan-mij-traditional-ii-50s-stratocaster-2020-neck-only-maple-58/feed/ 0