https://fenderstratocasterneck.com Thu, 09 Jul 2026 06:30:51 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/07/03/guitar-neck-padouk-on-sapele-24-75-conversion-s-style-fits-fender-strat/ https://fenderstratocasterneck.com/2026/07/03/guitar-neck-padouk-on-sapele-24-75-conversion-s-style-fits-fender-strat/#comments Fri, 03 Jul 2026 06:17:49 +0000 https://fenderstratocasterneck.com/2026/07/03/guitar-neck-padouk-on-sapele-24-75-conversion-s-style-fits-fender-strat/











24.75 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 21 Jescar “Medium, Medium” Frets. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 24.75″ Conversion Scale (This neck is meant to convert a 25.5″ scale guitar to 24.75). 872 Thick at 1st fret. 956 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/07/03/guitar-neck-padouk-on-sapele-24-75-conversion-s-style-fits-fender-strat/feed/ 0 https://fenderstratocasterneck.com/2026/06/21/fender-stratocaster-neck-2001-rosewood-board-fr-style-locking-nut-tuners-21-fret/ https://fenderstratocasterneck.com/2026/06/21/fender-stratocaster-neck-2001-rosewood-board-fr-style-locking-nut-tuners-21-fret/#comments Sun, 21 Jun 2026 17:42:51 +0000 https://fenderstratocasterneck.com/2026/06/21/fender-stratocaster-neck-2001-rosewood-board-fr-style-locking-nut-tuners-21-fret/




















2001 Fender Stratocaster neck with locking nut and chrome Fender tuners installed. Came off of a 2001 Strat. The frets are clean with no apparent notches or grooves. The rosewood slab is beautiful. It has 21 frets. It has one small ding (see pics) and a very small area of finish wear on the high E side, near the 3rd-5th frets, see pics. The neck is straight and the trussrod functions properly.

]]> https://fenderstratocasterneck.com/2026/06/21/fender-stratocaster-neck-2001-rosewood-board-fr-style-locking-nut-tuners-21-fret/feed/ 0 https://fenderstratocasterneck.com/2026/06/19/our-new-fender-style-neck-building-technique-with-no-router-tear-out-feature-length-video/ https://fenderstratocasterneck.com/2026/06/19/our-new-fender-style-neck-building-technique-with-no-router-tear-out-feature-length-video/#comments Fri, 19 Jun 2026 17:38:34 +0000 https://fenderstratocasterneck.com/2026/06/19/our-new-fender-style-neck-building-technique-with-no-router-tear-out-feature-length-video/ ]]> https://fenderstratocasterneck.com/2026/06/19/our-new-fender-style-neck-building-technique-with-no-router-tear-out-feature-length-video/feed/ 0 https://fenderstratocasterneck.com/2026/06/18/1-piece-stratocaster-21-ss-rounded-fretsvint-style-fits-warmoth-fender-strat/ https://fenderstratocasterneck.com/2026/06/18/1-piece-stratocaster-21-ss-rounded-fretsvint-style-fits-warmoth-fender-strat/#comments Thu, 18 Jun 2026 17:36:44 +0000 https://fenderstratocasterneck.com/2026/06/18/1-piece-stratocaster-21-ss-rounded-fretsvint-style-fits-warmoth-fender-strat/









These have small discolors in the wood. This will not affect the performance of the instrument. All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. NEW- Stainless Steel Rounded Fret Ends One Piece Roasted Maple Stratocaster Guitar Neck These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. 21 mm at 1st fret =. 23 mm at 12 fret =. 25.5 Scale (Standard Fender) Finish: Nitro Satin Nut Width: 42mm, 1 5/8s. Radius: 9.5 Fret: 21 Medium Stainless Steel Frets, Rounded Ends. (Double Expanding, Double Action). Standard Fender Heel Specs. Warmoth, allparts, fender, musikraft, jamerson, g&l, custom shop, usa, mighty mite, wd Quartersawn Roasted Stratocaster Guitar Neck / STRAT-22 w/Warmoth Bone Nut.

]]> https://fenderstratocasterneck.com/2026/06/18/1-piece-stratocaster-21-ss-rounded-fretsvint-style-fits-warmoth-fender-strat/feed/ 0 https://fenderstratocasterneck.com/2026/06/09/roasted-telecastervintage-style-22-stainless-steel-fits-fender-warmoth-tele/ https://fenderstratocasterneck.com/2026/06/09/roasted-telecastervintage-style-22-stainless-steel-fits-fender-warmoth-tele/#comments Tue, 09 Jun 2026 17:12:46 +0000 https://fenderstratocasterneck.com/2026/06/09/roasted-telecastervintage-style-22-stainless-steel-fits-fender-warmoth-tele/








These have small discolors in the wood. This will not affect the performance of the instrument. All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. Maple / Rosewood /Roasted Telecaster Guitar Neck. These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. Even C Neck Contour. 22 mm at 1st fret =. 23 mm at 12 fret =. Neck Material: Maple/ Rosewood Fretboard Roasted / Nitro Satin 1 5/8s Nut Width Radius: 9.5, Medium C Back Contour Fret: 22 Stainless Steel Medium Jumbo Frets 10mm tuner holes (Standard Size) Head Truss-rod Adjust (Double Expanding) Will It Fit? Standard Fender Heel Specs. Warmoth, allparts, fender, musikraft, jamerson, g&l, custom shop, usa, mighty mite, wd Roasted Stratocaster Guitar Neck / STRAT-22 w/Warmoth Bone Nut.

]]> https://fenderstratocasterneck.com/2026/06/09/roasted-telecastervintage-style-22-stainless-steel-fits-fender-warmoth-tele/feed/ 0 https://fenderstratocasterneck.com/2026/04/10/roasted-stratocastervintage-style-w-stainless-steel-fretsfits-fender-warmoth-2/ https://fenderstratocasterneck.com/2026/04/10/roasted-stratocastervintage-style-w-stainless-steel-fretsfits-fender-warmoth-2/#comments Fri, 10 Apr 2026 11:24:42 +0000 https://fenderstratocasterneck.com/2026/04/10/roasted-stratocastervintage-style-w-stainless-steel-fretsfits-fender-warmoth-2/






All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. These have small discolors in the wood. This will not affect the performance of the instrument. Maple / Rosewood Roasted Stratocaster Guitar Neck. These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. Even C Neck Contour. 22 mm at 1st fret =. 23 mm at 12 fret =. Neck Material: Maple/ Rosewood Fretboard Roasted / Nitro Satin 1 5/8s Nut Width Radius: 9.5, Medium C Back Contour Fret: 21 Stainless Steel Medium Jumbo Frets Vintage Tuner Holes 8mm. Vintage Size, can be reamed larger. (Double Expanding, Action Truss Rod) Will It Fit? Standard Fender Heel Specs. Warmoth, allparts, fender, musikraft, jamerson, g&l, custom shop, usa, mighty mite, wd Quartersawn Roasted Stratocaster Guitar Neck / STRAT-22 w/Warmoth Bone Nut.

]]> https://fenderstratocasterneck.com/2026/04/10/roasted-stratocastervintage-style-w-stainless-steel-fretsfits-fender-warmoth-2/feed/ 0 https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/ https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/#comments Sun, 05 Apr 2026 23:15:57 +0000 https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/












25.5 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 3a Roasted Curly Maple. 22 Jescar “Medium, Medium” Frets. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 860 Thick at 1st fret. 947 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/feed/ 0 https://fenderstratocasterneck.com/2026/03/25/genuine-fender-squier-strat-60s-style-small-headstock-tinted-classic-vibe-neck-2/ https://fenderstratocasterneck.com/2026/03/25/genuine-fender-squier-strat-60s-style-small-headstock-tinted-classic-vibe-neck-2/#comments Wed, 25 Mar 2026 19:47:48 +0000 https://fenderstratocasterneck.com/2026/03/25/genuine-fender-squier-strat-60s-style-small-headstock-tinted-classic-vibe-neck-2/

















UNPLAYED CLASSIC VIBE STRATOCASTER 60’S Vintage Size Small HEADSTOCK NECK!! High quality, beautifully tinted and finished neck from the top of the Squier line. For 4-Bolt Strat Bodies. Fits almost all Fender/Squier brand Stratocaster bodies with a 4-bolt heel cutout. Player-friendly features include a slim, comfortable “C”-shaped neck profile with an easy-playing 9.5-radius fingerboard and narrow-tall frets. This throwback Squier neck also features rich-looking nickel-plated hardware and a slick vintage-tint gloss finish for an old-school vibe. No counterfeits, knock-offs, fakes or cheap imitations. We are an authorized Fender dealer. This part was removed from a genuine Fender Squier Guitar right out of the box. The guitar was removed, inspected and taken apart. FEATURES: Maple neck with Indian Laurel fingerboard. 21 Narrow Tall frets. Standard Head Adjust truss rod. Standard Strat 2 3/16 width heel with 4-bolt mounting. “C” shape neck profile. Fits Almost All Fender Bodies with a 4-Bolt Strat Heel Cutout. Fingerboard radius is 9.5 (241mm). White dot position inlays. 4mm hex truss rod nut. The nut width is 1.650 (42. Mm). 25.5 (648mm) scale length. Vintage style 2-screw tuning keys included. Thickness at the first fret is + /. Thickness at the 12th fret is + /. These items are from brand new guitars that we break down for parts. The photos are the actual part you will receive. Mobile device users: swipe right (or right arrow) for more item details. See “Item Details” under “About this Item” for more info. A tip of the hat to the Strat® models produced in the 1960s, the Classic Vibe’60s Stratocaster has player-friendly features including a slim, comfortable “C”-shaped neck profile with an easy-playing 9.5-radius fingerboard and narrow-tall frets for expressive string bending effects. This throwback Squier neck also features rich-looking nickel-plated hardware and a slick vintage-tint gloss neck finish for an old-school vibe. This is a brand new neck from a Fender Squier Stratocaster. It does not come in retail packaging. Maple with a Indian Laurel fingerboard. 2.19 wide at the body side screws. 2.15 wide at the headstock side screws. 1.07 deep from the top of the fretboard. 2.6 from the base of the heel to the upper screw holes. This is commonly referred to as being a 2 3/16 inch heel. 24.3mm center to center. This is a brand new item. It was removed from a brand new guitar. These are nice necks. They are made from clear Maple and smooth Indian Laurel. The frets are good. The edges are nicely beveled – no bayonets sticking out that need to be dressed. I don’t think you’ll be disappointed. This is the neck from a brand new Fender Squier Stratocaster. The necks that I sell are from brand new guitars that are parted out. Sometimes there is an extra screw hole, or slightly different rout or cut, etc. From different manufacturing plants that Fender uses. Sometimes even the shade or hue of the color will be slightly different from lot to lot.

]]> https://fenderstratocasterneck.com/2026/03/25/genuine-fender-squier-strat-60s-style-small-headstock-tinted-classic-vibe-neck-2/feed/ 0 https://fenderstratocasterneck.com/2026/03/23/guitar-neck-bubinga-on-birdseye-maple-s-style-fits-fender-stratocaster/ https://fenderstratocasterneck.com/2026/03/23/guitar-neck-bubinga-on-birdseye-maple-s-style-fits-fender-stratocaster/#comments Mon, 23 Mar 2026 19:43:49 +0000 https://fenderstratocasterneck.com/2026/03/23/guitar-neck-bubinga-on-birdseye-maple-s-style-fits-fender-stratocaster/











25.5 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 22 Jescar “Medium/Jumbo” Frets. Height. 047 Width. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 864 Thick at 1st fret. 945 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/03/23/guitar-neck-bubinga-on-birdseye-maple-s-style-fits-fender-stratocaster/feed/ 0 https://fenderstratocasterneck.com/2026/03/23/2004-starcaster-fender-stratocaster-neck-arrow-musiclander-swinger-style-great/ https://fenderstratocasterneck.com/2026/03/23/2004-starcaster-fender-stratocaster-neck-arrow-musiclander-swinger-style-great/#comments Mon, 23 Mar 2026 07:42:57 +0000 https://fenderstratocasterneck.com/2026/03/23/2004-starcaster-fender-stratocaster-neck-arrow-musiclander-swinger-style-great/











Fender Arrow (Musiclander Swinger) Style Headstock. 2000 Starcaster Stratocaster by Fender Maple Neck. Very Stable Piece Of Maple. Fingerboard and frets are in great condition and well taken care of. Zero sign of use other than maybe a few scratches on the tuner buttons and that’s about it. Truss rod is fully functional (Standard 3/16 Wrench) and turns flawlessly with no wear on the adjustment screw. It is a Fender licensed. Part and will fit many projects easily. We rarely get these in all maple so grab it while you can. Thank you for your understanding! If any area has been altered, it will be clearly listed in the item description. Neck weighs 1lb 13oz as shown. Full Size 21 Fret Neck, Rosewood Fingerboard (Heel Width 55.62MM). Factory Nut (Width 42MM). 1st Fret (Thickness 22.26MM). 12th Fret (Thickness 23.31MM). (4)Original Neck Screws (Saves Problems On Your Build).

]]> https://fenderstratocasterneck.com/2026/03/23/2004-starcaster-fender-stratocaster-neck-arrow-musiclander-swinger-style-great/feed/ 0