https://fenderstratocasterneck.com Thu, 02 Jul 2026 06:15:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/ https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/#comments Thu, 02 Jul 2026 06:15:45 +0000 https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/


Genuine WD Music Fender. Vintage Rosewood Strat Neck Soft V profile. Replacement Vintage Stratocaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 inch radius, 1 5/8 inch nut width, a comfortable soft’V’ profile and a honey tinted gloss finish. Rosewood finger board with a heel adjust truss rod location and 8.8 mm peg holes drilled for a vintage Kluson tuning machine as nature intended. All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod. Which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod. Which adjusts only 1 way. All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or “blems”. Please contact customer service if you have any questions or concerns about your neck when it arrives. Some neck pocket modification may be required. We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.

]]> https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/feed/ 0 https://fenderstratocasterneck.com/2026/07/01/genuine-fender-classic-series-50s-strat-soft-v-neck-21-vintage-frets-maple-2/ https://fenderstratocasterneck.com/2026/07/01/genuine-fender-classic-series-50s-strat-soft-v-neck-21-vintage-frets-maple-2/#comments Wed, 01 Jul 2026 18:14:43 +0000 https://fenderstratocasterneck.com/2026/07/01/genuine-fender-classic-series-50s-strat-soft-v-neck-21-vintage-frets-maple-2/



Genuine Fender Classic Series 50’s Strat Soft V Neck, 21 Vintage Frets, Maple. Crafted at Fender’s Ensenada, Mexico, manufacturing facility. This genuine Fender Stratocaster® guitar maple neck features a comfortable “soft V” profile and 7.25-radius maple fingerboard with 21 vintage-style frets. The nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish on the back offers smooth playability. For true Fender authenticity, it’s also serialized and stamped, with genuine “Original Contour Body” headstock decal. Vintage Style heel adjust. 7.25 (184.1 mm). 25.5 (648 mm). 1.650 (42 mm). 540 (13.71 mm). 820 (20.82 mm), 12th Fret. 900 (22.86 mm). 358 (9.09 mm). IMPORTANT PLEASE READ NOTICE BELOW CAREFULLY. All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or “blems”. Please contact customer service if you have any questions or concerns about your neck when it arrives. Some neck pocket modification may be required. We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.

]]> https://fenderstratocasterneck.com/2026/07/01/genuine-fender-classic-series-50s-strat-soft-v-neck-21-vintage-frets-maple-2/feed/ 0 https://fenderstratocasterneck.com/2026/07/01/fender-vintera-iii-late-50s-stratocaster-strat-neck-tuners-1950s-maple-d/ https://fenderstratocasterneck.com/2026/07/01/fender-vintera-iii-late-50s-stratocaster-strat-neck-tuners-1950s-maple-d/#comments Wed, 01 Jul 2026 06:13:45 +0000 https://fenderstratocasterneck.com/2026/07/01/fender-vintera-iii-late-50s-stratocaster-strat-neck-tuners-1950s-maple-d/







Welcome to The Stratosphere. Helping the World Build a Better Guitar. Fender Vintera III Late 50s Stratocaster Strat NECK &TUNERS 1950s Maple D. Description: Official Fender Vintera III Late’50’s Reissue Stratocaster Neck & Tuners- Maple- Late’50s “D” Shape, 21 Vintage Tall Frets- 7.25″ Radius (184.1 mm)- 25.5″ Scale Length (648 mm)- 1.650 Width at Nut (42 mm)- Genuine Fender. Search tips for GEAR. The STRATosphere lists new, like new and used gear every day Monday through Friday. If you have specific requests, please don’t hesitate to message us and we will do our best to get the items you are looking for. We can’t always list everything we want in our titles to identify all of the items key features. Here are some tips and search terms to help search our listings for what you are looking for. We generally offer guitar/bass bodies in three body configurations if they are bolt-on neck guitars. Body hardware (Body with Bridge & Tailpiece if applicable, strap buttons, neck plate with screws, back plate/trem covers if applicable). Loaded Body (Complete body with all electronics, wiring, hardware as it would come new without modifications unless specified otherwise). Body (Body with Strap Buttons Only). We generally offer two neck configurations. Neck Tuners Tuners On. It may say Neck & Tuners, Neck + Tuners, Neck w/Tuners, etc. Neck (will give you results with and without tuners). We offer guitars/basses that are set neck, neck through, or bolt on guitars as a husk to be the base for your custom build. Body & Neck, Body + Neck, etc. We offer Guitar/Bass electronics in several variations. Minimal Soldering would be required to get the electronics in your custom build and would generally consist of connecting a ground wire, input jack or toggle switch, after the electronics are in place on your guitar/bass. Loaded Pickguard This is similar to the Pickups parts and knobs configuration but the pickups would be in place and attached to the original pickguard from the guitar. A Strat Loaded Pickguard would have everything attached to the pickguard so it would pop into your S style guitar, minor wiring and minor adjustments but all original solder joints in tact between pickups and pots. Pots Switch (Potentiometers, Switch, Capacitor and all wiring with as many original solder joints as possible, from the guitar/bass specified). Other tips would be to keep any extra words out of the search. If you put in any word into the search that doesn’t match our title, it won’t show that we have it. We always specify the fingerboard wood without abbreviation maple, rosewood, ebony, etc. Stratocaster is always STRAT, Telecaster is always TELE. Common Series naming that may help you search: Classic Vibe 50s/60s/70s, American Vintage always has AV II and the full year 1963, 1977, etc. , Standard, Professional II, Professional Classic, Vintera, Sonic, Affinity, Road Worn, Ultra, Ultra Luxe, etc.. Artist series will have their last name in the title but don’t try to find everything by full name. Color is always mentioned in the title for the body unless it is only one option (Buddy Guy or SRV Loaded Body for instance). The color may be abbreviated so it may be best to try a couple different ways (surf, green, srf) or leave a color out and browse the options we do have for a specific series you are looking for. Please reach out if you have questions or don’t find what you are looking for. We have a great customer service team and we’re happy to assist! Do we offer discounts? Any sort of potential discount or deal would likely be dependent on the specific item(s) that you’re interested in, and we’d need to know the 12-digit item number of the item to investigate them further since there are a few different factors that may go into pricing, such as changes implemented by manufacturers, the age of a particular listing, and so on. In general, we set our own asking prices so there is often minimal wiggle room. We do always have discounted items that get released on the 1st of every month, and we generally have at least 1 end of the year sale. To offer its customers at great prices. Where do we get the products we sell? Unlike some of our competitors, theSTRATosphere typically offers parts from new A-Stock instruments that we received from manufacturers and we make the sum of their parts and components available for sale to customers, repair technicians, luthiers, and/or creative folks that want to assemble their own instruments, just as we have been for about 20 years now! Most of our items are considered “open box” items because they come from whole instruments that have already been assembled from the factory, set up to play, and passed through the factorys quality control department, so it should have little to no play time on it, and they should be free from any defects too! If we sell items that are Used, demo or B stock, they will be clearly marked as such in the titles of our listings. Lastly, theSTRATosphere would NEVER sell counterfeit products where we claimed it to be something it was not, or from a guitar/bass that it wasn’t. We pride ourselves on transparency and we have dedicated customer service staff that will work hard to get you the gear you are looking for. Is the part you are looking at compatible with your guitar/bass? For the best fit and function, we can only recommend pairing items that are the same make and model. We would suggest consulting with a Luthier or a trusted guitar technician. In the past several years, most Fender and Squier parts from the same body shape Strat, Tele, Jazz, etc. Hole spacings, dimensions of neck pocket, etc. However, even if an item is a direct replacement to what you had, there will likely be necessary adjustments. Expect that a completed custom build will need final setup, wiring, and potential fret leveling/crowing/polishing. Yes, on most items we can. Please commit to purchasing the items, request a total and we will invoice you accordingly. Some items cannot be combined due to packaging size and damage concerns: such as a neck and body, a neck and pickguard, multiple hardshell cases or say a neck and gig bag. You can return the item for any reason within that time frame. Please pack well and return to. 112 Crawley Falls Rd. Please include your full name, order # and reason for return. RETURN – ADDITONAL INSTRUCTIONS. The item needs to be in transit back to us within 30 days from the day that you received it. Insuring the item is up to you. Please return the mistaken item and once it shows in transit back to us we will send your ordered item right away. We do our best to avoid this inconvenience and disappointment. RECEIVED DAMAGED (return label). INTERNATIONAL – DECLARATIONS LOWER VALUE REQUESTED. We’re sorry, we must declare the actual value of the item. We do not know how much it would be. Send this message after approving return. We’re sorry there is an issue with your order. The STRATosphere (Fret Factory, llc) is best known for offering the finest selection of guitar parts in the world. Quality has always been our top priority. Shop 24/7 to build a better guitar! We’ve been in business for over 20 years offering a unique blend of hard to find, proprietary and discounted guitar parts. Owned and operated in New Hampshire, with a passion to help with your custom builds or restoration needs. The STRATosphere is not a walk-in music store and we operate more like a production facility and warehouse. We do not have a selection to browse and we have to stay busy to get the items you want out the door and in your hands as fast as possible. The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. The STRATosphere is not affiliated with Fender Musical Instruments. Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P Bass®, J Bass®, Fender® and the distinctive headstock design of Fender guitars are registered trademarks of Fender® Musical Instruments. View more great items. STRAP BUTTONS & LOCKS. View Our Customer Feedback. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

]]> https://fenderstratocasterneck.com/2026/07/01/fender-vintera-iii-late-50s-stratocaster-strat-neck-tuners-1950s-maple-d/feed/ 0 https://fenderstratocasterneck.com/2026/06/30/roasted-maple-rosewood-strat-neck-satin-fits-warmoth-fender-bodies-0srl/ https://fenderstratocasterneck.com/2026/06/30/roasted-maple-rosewood-strat-neck-satin-fits-warmoth-fender-bodies-0srl/#comments Tue, 30 Jun 2026 06:11:49 +0000 https://fenderstratocasterneck.com/2026/06/30/roasted-maple-rosewood-strat-neck-satin-fits-warmoth-fender-bodies-0srl/







From the Guitar Closet. The frets have been leveled and dressed. This is the exact neck you will receive. Shaft Wood: Roasted Maple. Right / Left Handed: Right-Handed. Neck Back Profile: Modern C. Tuner Hole Size: Modern 10 mm. Fretboard Radius: 9.5. Number of Frets: 22. Inlay Shape: Standard Dots. Neck Heel Shape: Strat® Shape. Thickness at 1st fret: 21.5mm. Thickness at 12th fret: 23.0 mm.

]]> https://fenderstratocasterneck.com/2026/06/30/roasted-maple-rosewood-strat-neck-satin-fits-warmoth-fender-bodies-0srl/feed/ 0 https://fenderstratocasterneck.com/2026/06/29/vintage-21-fret-roasted-maple-strat-neck-nitro-satin-fit-fender-warmoth-vsmi/ https://fenderstratocasterneck.com/2026/06/29/vintage-21-fret-roasted-maple-strat-neck-nitro-satin-fit-fender-warmoth-vsmi/#comments Mon, 29 Jun 2026 18:10:47 +0000 https://fenderstratocasterneck.com/2026/06/29/vintage-21-fret-roasted-maple-strat-neck-nitro-satin-fit-fender-warmoth-vsmi/








From the Gluitar Closet. Roasted Maple Vintage Strat Neck Nitro Satin finish. Truss rod adjust at heel. The frets have been leveled and dressed. This is the neck you will receive. Shaft Wood: Roasted Maple. Fretboard Wood: Roasted Maple. Finish: Satin Tinted Nitro. Right / Left Handed: Right-Handed. Neck Back Profile: Vintage C. Tuner Hole Size: Vintage 8 mm. Fretboard Radius: 9.5. Number of Frets: 21. Inlay Shape: Standard Dots. Side Dots: Black Side Dots. Neck Heel Shape: Strat® Shape. Thickness at 1st fret: 21.5mm. Thickness at 12th fret: 23.0 mm.

]]> https://fenderstratocasterneck.com/2026/06/29/vintage-21-fret-roasted-maple-strat-neck-nitro-satin-fit-fender-warmoth-vsmi/feed/ 0 https://fenderstratocasterneck.com/2026/06/28/roasted-maple-strat-neck-satin-stratocaster-fits-warmoth-fender-0smq/ https://fenderstratocasterneck.com/2026/06/28/roasted-maple-strat-neck-satin-stratocaster-fits-warmoth-fender-0smq/#comments Sun, 28 Jun 2026 18:08:48 +0000 https://fenderstratocasterneck.com/2026/06/28/roasted-maple-strat-neck-satin-stratocaster-fits-warmoth-fender-0smq/







Roasted Maple Strat Neck Satin Stratocaster. This is the exact neck you will receive. The frets have been leveled and dressed. Shaft Wood: Roasted Maple. Fretboard Wood: Roasted Maple. Right / Left Handed: Right-Handed. Neck Back Profile: Modern C. Tuner Hole Size: Modern 10 mm. Fretboard Radius: 9.5. Number of Frets: 22. Inlay Shape: Standard Dots. Side Dots: Black Side Dots. Neck Heel Shape: Strat® Shape.

]]> https://fenderstratocasterneck.com/2026/06/28/roasted-maple-strat-neck-satin-stratocaster-fits-warmoth-fender-0smq/feed/ 0 https://fenderstratocasterneck.com/2026/06/27/fender-squier-classic-vibe-50s-strat-neck-guitar-vintage-tint-c-mn-maple/ https://fenderstratocasterneck.com/2026/06/27/fender-squier-classic-vibe-50s-strat-neck-guitar-vintage-tint-c-mn-maple/#comments Sat, 27 Jun 2026 18:06:47 +0000 https://fenderstratocasterneck.com/2026/06/27/fender-squier-classic-vibe-50s-strat-neck-guitar-vintage-tint-c-mn-maple/







Welcome to The Stratosphere. Helping the World Build a Better Guitar. Fender Squier Classic Vibe 50s Strat NECK, Guitar Vintage Tint, “C” MN Maple! Description: Official Fender Squier Classic Vibe’50s Stratocaster Neck- Tinted Maple- “C” Shape, 21 Narrow Tall Frets- 9.5″ Radius (241 mm)- 25.5″ Scale Length (648 mm)- 1.650 Width at Nut (42 mm)- Genuine Fender. Search tips for GEAR. The STRATosphere lists new, like new and used gear every day Monday through Friday. If you have specific requests, please don’t hesitate to message us and we will do our best to get the items you are looking for. We can’t always list everything we want in our titles to identify all of the items key features. Here are some tips and search terms to help search our listings for what you are looking for. We generally offer guitar/bass bodies in three body configurations if they are bolt-on neck guitars. (Body with Bridge & Tailpiece if applicable, strap buttons, neck plate with screws, back plate/trem covers if applicable). (Complete body with all electronics, wiring, hardware as it would come new without modifications unless specified otherwise). (Body with Strap Buttons Only). We generally offer two neck configurations. It may say Neck & Tuners, Neck + Tuners, Neck w/Tuners, etc. (will give you results with and without tuners). We offer guitars/basses that are set neck, neck through, or bolt on guitars as a husk to be the base for your custom build. Body & Neck, Body + Neck, etc. We offer Guitar/Bass electronics in several variations. This configuration is all the pickups that would have come with a specific guitar/bass, wiring, knobs, switches and input jack. Minimal Soldering would be required to get the electronics in your custom build and would generally consist of connecting a ground wire, input jack or toggle switch, after the electronics are in place on your guitar/bass. This is similar to the Pickups parts and knobs configuration but the pickups would be in place and attached to the original pickguard from the guitar. A Strat Loaded Pickguard would have everything attached to the pickguard so it would pop into your S style guitar, minor wiring and minor adjustments but all original solder joints in tact between pickups and pots. (This would be the original pickups from the specified guitar/bass with the full length lead wires, mounting screws, springs and mounting rings if applicable). Pots Switch (Potentiometers, Switch, Capacitor and all wiring with as many original solder joints as possible, from the guitar/bass specified). Other tips would be to keep any extra words out of the search. If you put in any word into the search that doesn’t match our title, it won’t show that we have it. We always specify the fingerboard wood without abbreviation maple, rosewood, ebony, etc. Stratocaster is always STRAT, Telecaster is always TELE. Common Series naming that may help you search: Classic Vibe 50s/60s/70s, American Vintage always has AV II and the full year 1963, 1977, etc. , Standard, Professional II, Professional Classic, Vintera, Sonic, Affinity, Road Worn, Ultra, Ultra Luxe, etc.. Artist series will have their last name in the title but don’t try to find everything by full name. Color is always mentioned in the title for the body unless it is only one option (Buddy Guy or SRV Loaded Body for instance). The color may be abbreviated so it may be best to try a couple different ways (surf, green, srf) or leave a color out and browse the options we do have for a specific series you are looking for. Please reach out if you have questions or don’t find what you are looking for. We have a great customer service team and we’re happy to assist! Do we offer discounts? Any sort of potential discount or deal would likely be dependent on the specific item(s) that you’re interested in, and we’d need to know the 12-digit item number of the item to investigate them further since there are a few different factors that may go into pricing, such as changes implemented by manufacturers, the age of a particular listing, and so on. In general, we set our own asking prices so there is often minimal wiggle room. We do always have discounted items that get released on the 1st of every month, and we generally have at least 1 end of the year sale. To offer its customers at great prices. Where do we get the products we sell? Unlike some of our competitors, theSTRATosphere typically offers parts from new A-Stock instruments that we received from manufacturers and we make the sum of their parts and components available for sale to customers, repair technicians, luthiers, and/or creative folks that want to assemble their own instruments, just as we have been for about 20 years now! Most of our items are considered “open box” items because they come from whole instruments thatve already been assembled, set up to play, and passed through the factorys quality control department, so it should have little to no play time on it, and they should be free from any defects too! Lastly, theSTRATosphere would NEVER sell counterfeit products where we claimed it was something it wasn’t, or from a guitar/bass that it wasn’t. We pride ourselves on transparency, we are owned and operated by musicians, and we have dedicated customer service staff that will work hard to get you the gear you are looking for. Is the part you are looking at compatible with your guitar/bass? For the best fit and function we can only recommend pairing items that are the same make and model. We would suggest consulting with a Luthier or a trusted guitar technician. In the past several years, most Fender and Squier parts from the same body shape Strat, Tele, Jazz, etc. Hole spacings, dimensions of neck pocket, etc. However, even if an item is a direct replacement to what you had, there will likely be necessary adjustments. Expect that a completed custom build will need final setup, wiring, and potential fret leveling/crowing/polishing. Yes, on most items we can. Some items cannot be combined due to packaging size and damage concerns: such as: a neck and body, a neck and pickguard, multiple hardshell cases or say a neck and gig bag. You can return the item for any reason within that time frame. Please pack well and return to. 112 Crawley Falls Rd. Please include your full name, order # and reason for return. RETURN – ADDITONAL INSTRUCTIONS. The item needs to be in transit back to us within 30 days from the day that you received it. Insuring the item is up to you. Please return the mistaken item and once it shows in transit back to us we will send your ordered item right away. We do our best to avoid this inconvenience and disappointment. RECEIVED DAMAGED (return label). INTERNATIONAL – DECLARATIONS LOWER VALUE REQUESTED. We’re sorry, we must declare the actual value of the item. We do not know how much it would be. Send this message after approving return. We’re sorry there is an issue with your order. The STRATosphere (Fret Factory, llc) is best known for offering the finest selection of guitar parts in the world. Quality has always been our top priority. Shop 24/7 to build a better guitar! We’ve been in business for over 20 years offering a unique blend of hard to find, proprietary and discounted guitar parts. Owned and operated in New Hampshire, with a passion to help with your custom builds or restoration needs. The STRATosphere is not a walk-in music store and we operate more like a production facility and warehouse. We do not have a selection to browse and we have to stay busy to get the items you want out the door and in your hands as fast as possible. The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. The STRATosphere is not affiliated with Fender Musical Instruments. Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P Bass®, J Bass®, Fender® and the distinctive headstock design of Fender guitars are registered trademarks of Fender® Musical Instruments. View more great items! STRAP BUTTONS & LOCKS. View Our Customer Feedback. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

]]> https://fenderstratocasterneck.com/2026/06/27/fender-squier-classic-vibe-50s-strat-neck-guitar-vintage-tint-c-mn-maple/feed/ 0 https://fenderstratocasterneck.com/2026/06/25/fender-american-ultra-ii-stratocaster-strat-neck-d-shaped-mn-maple/ https://fenderstratocasterneck.com/2026/06/25/fender-american-ultra-ii-stratocaster-strat-neck-d-shaped-mn-maple/#comments Thu, 25 Jun 2026 06:01:19 +0000 https://fenderstratocasterneck.com/2026/06/25/fender-american-ultra-ii-stratocaster-strat-neck-d-shaped-mn-maple/







Welcome to The Stratosphere. Helping the World Build a Better Guitar. Fender American Ultra II Stratocaster Strat, NECK “D” Shaped MN Maple! Description: Official American Fender Ultra II Stratocaster Neck- Quartersawn Maple- Modern “D” Shape- 10″- 14″ Compound Radius (254-355.6 mm)- 22 Medium Jumbo Frets- 25.5″ (648 mm) Scale Length- 1.685″ (42.8 mm) Width at Nut- Ultra Rolled Edges and Luminlay Side Dots- Satin Finish- Genuine Fender. Country/Make: United States- American. Search tips for GEAR. The STRATosphere lists new, like new and used gear every day Monday through Friday. If you have specific requests, please don’t hesitate to message us and we will do our best to get the items you are looking for. We can’t always list everything we want in our titles to identify all of the items key features. Here are some tips and search terms to help search our listings for what you are looking for. We generally offer guitar/bass bodies in three body configurations if they are bolt-on neck guitars. (Body with Bridge & Tailpiece if applicable, strap buttons, neck plate with screws, back plate/trem covers if applicable). (Complete body with all electronics, wiring, hardware as it would come new without modifications unless specified otherwise). (Body with Strap Buttons Only). We generally offer two neck configurations. It may say Neck & Tuners, Neck + Tuners, Neck w/Tuners, etc. (will give you results with and without tuners). We offer guitars/basses that are set neck, neck through, or bolt on guitars as a husk to be the base for your custom build. Body & Neck, Body + Neck, etc. We offer Guitar/Bass electronics in several variations. This configuration is all the pickups that would have come with a specific guitar/bass, wiring, knobs, switches and input jack. Minimal Soldering would be required to get the electronics in your custom build and would generally consist of connecting a ground wire, input jack or toggle switch, after the electronics are in place on your guitar/bass. This is similar to the Pickups parts and knobs configuration but the pickups would be in place and attached to the original pickguard from the guitar. A Strat Loaded Pickguard would have everything attached to the pickguard so it would pop into your S style guitar, minor wiring and minor adjustments but all original solder joints in tact between pickups and pots. (This would be the original pickups from the specified guitar/bass with the full length lead wires, mounting screws, springs and mounting rings if applicable). Pots Switch (Potentiometers, Switch, Capacitor and all wiring with as many original solder joints as possible, from the guitar/bass specified). Other tips would be to keep any extra words out of the search. If you put in any word into the search that doesn’t match our title, it won’t show that we have it. We always specify the fingerboard wood without abbreviation maple, rosewood, ebony, etc. Stratocaster is always STRAT, Telecaster is always TELE. Common Series naming that may help you search: Classic Vibe 50s/60s/70s, American Vintage always has AV II and the full year 1963, 1977, etc. , Standard, Professional II, Professional Classic, Vintera, Sonic, Affinity, Road Worn, Ultra, Ultra Luxe, etc.. Artist series will have their last name in the title but don’t try to find everything by full name. Color is always mentioned in the title for the body unless it is only one option (Buddy Guy or SRV Loaded Body for instance). The color may be abbreviated so it may be best to try a couple different ways (surf, green, srf) or leave a color out and browse the options we do have for a specific series you are looking for. Please reach out if you have questions or don’t find what you are looking for. We have a great customer service team and we’re happy to assist! Do we offer discounts? Any sort of potential discount or deal would likely be dependent on the specific item(s) that you’re interested in, and we’d need to know the 12-digit item number of the item to investigate them further since there are a few different factors that may go into pricing, such as changes implemented by manufacturers, the age of a particular listing, and so on. In general, we set our own asking prices so there is often minimal wiggle room. We do always have discounted items that get released on the 1st of every month, and we generally have at least 1 end of the year sale. To offer its customers at great prices. Where do we get the products we sell? Unlike some of our competitors, theSTRATosphere typically offers parts from new A-Stock instruments that we received from manufacturers and we make the sum of their parts and components available for sale to customers, repair technicians, luthiers, and/or creative folks that want to assemble their own instruments, just as we have been for about 20 years now! Most of our items are considered “open box” items because they come from whole instruments thatve already been assembled, set up to play, and passed through the factorys quality control department, so it should have little to no play time on it, and they should be free from any defects too! Lastly, theSTRATosphere would NEVER sell counterfeit products where we claimed it was something it wasn’t, or from a guitar/bass that it wasn’t. We pride ourselves on transparency, we are owned and operated by musicians, and we have dedicated customer service staff that will work hard to get you the gear you are looking for. Is the part you are looking at compatible with your guitar/bass? For the best fit and function we can only recommend pairing items that are the same make and model. We would suggest consulting with a Luthier or a trusted guitar technician. In the past several years, most Fender and Squier parts from the same body shape Strat, Tele, Jazz, etc. Hole spacings, dimensions of neck pocket, etc. However, even if an item is a direct replacement to what you had, there will likely be necessary adjustments. Expect that a completed custom build will need final setup, wiring, and potential fret leveling/crowing/polishing. Yes, on most items we can. Some items cannot be combined due to packaging size and damage concerns: such as: a neck and body, a neck and pickguard, multiple hardshell cases or say a neck and gig bag. You can return the item for any reason within that time frame. Please pack well and return to. 112 Crawley Falls Rd. Please include your full name, order # and reason for return. RETURN – ADDITONAL INSTRUCTIONS. The item needs to be in transit back to us within 30 days from the day that you received it. Insuring the item is up to you. Please return the mistaken item and once it shows in transit back to us we will send your ordered item right away. We do our best to avoid this inconvenience and disappointment. RECEIVED DAMAGED (return label). INTERNATIONAL – DECLARATIONS LOWER VALUE REQUESTED. We’re sorry, we must declare the actual value of the item. We do not know how much it would be. Send this message after approving return. We’re sorry there is an issue with your order. The STRATosphere (Fret Factory, llc) is best known for offering the finest selection of guitar parts in the world. Quality has always been our top priority. Shop 24/7 to build a better guitar! We’ve been in business for over 20 years offering a unique blend of hard to find, proprietary and discounted guitar parts. Owned and operated in New Hampshire, with a passion to help with your custom builds or restoration needs. The STRATosphere is not a walk-in music store and we operate more like a production facility and warehouse. We do not have a selection to browse and we have to stay busy to get the items you want out the door and in your hands as fast as possible. The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. The STRATosphere is not affiliated with Fender Musical Instruments. Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P Bass®, J Bass®, Fender® and the distinctive headstock design of Fender guitars are registered trademarks of Fender® Musical Instruments. View more great items! STRAP BUTTONS & LOCKS. View Our Customer Feedback. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

]]> https://fenderstratocasterneck.com/2026/06/25/fender-american-ultra-ii-stratocaster-strat-neck-d-shaped-mn-maple/feed/ 0 https://fenderstratocasterneck.com/2026/06/24/ferocious-flame-maple-strat-guitar-neck-fits-fender-warmoth/ https://fenderstratocasterneck.com/2026/06/24/ferocious-flame-maple-strat-guitar-neck-fits-fender-warmoth/#comments Wed, 24 Jun 2026 17:58:06 +0000 https://fenderstratocasterneck.com/2026/06/24/ferocious-flame-maple-strat-guitar-neck-fits-fender-warmoth/















Product Overview For sale is the exact guitar neck you see in the pictures. Our necks are custom, hand made, locally in the USA. All necks come completely fretted. We use jumbo frets from Stew Mac with the following specs: Width. 100 (2.54mm), Crown. 050 (1.27mm), Tang. We are more than happy to work with customers regarding any issues that may arise. If for some reason we are not able to remedy your issue we will happily initiate our hassle free return process. CONTACT We love to hear from our customers, got a question? We will return any questions within 24-hours Monday – Friday, and as soon as possible on the weekends.

]]> https://fenderstratocasterneck.com/2026/06/24/ferocious-flame-maple-strat-guitar-neck-fits-fender-warmoth/feed/ 0 https://fenderstratocasterneck.com/2026/06/24/1998-fender-standard-stratocaster-lefty-left-handed-strat-guitar-neck/ https://fenderstratocasterneck.com/2026/06/24/1998-fender-standard-stratocaster-lefty-left-handed-strat-guitar-neck/#comments Wed, 24 Jun 2026 05:56:47 +0000 https://fenderstratocasterneck.com/2026/06/24/1998-fender-standard-stratocaster-lefty-left-handed-strat-guitar-neck/
















For sale the neck from a left hand 1998 made in Mexico Fender Standard stratocaster guitar neck. The frets are in excellent condition and it is straight with a working truss rod but it needs a new nut, otherwise it plays great with low action. It has mounting holes for right handed Sperzel locking tuners but only one will show with standard 2 pin tuners installed and it has a few shallow marks in the finish on the back but is otherwise in excellent condition. Only what is pictured is included.

]]> https://fenderstratocasterneck.com/2026/06/24/1998-fender-standard-stratocaster-lefty-left-handed-strat-guitar-neck/feed/ 0