https://fenderstratocasterneck.com Thu, 15 Oct 2026 13:07:58 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/10/13/50s-stratocaster-neck-to-order-vintage-fender-specs-custom-heavy-relic/ https://fenderstratocasterneck.com/2026/10/13/50s-stratocaster-neck-to-order-vintage-fender-specs-custom-heavy-relic/#comments Tue, 13 Oct 2026 13:01:44 +0000 https://fenderstratocasterneck.com/2026/10/13/50s-stratocaster-neck-to-order-vintage-fender-specs-custom-heavy-relic/













This is a listing to Order a vintage reissue made by hand following the Fender standard icludes all the relic you want! You can choose your specs. The finish is nitro. Maple flat sawn cut or rift sawn AAA Flame. Black 1/4′ fretboard dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall) if you need a different fret wire just message me. 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius or 10″, 12″. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. D or U profila, also oval C, large C, soft V or hard V, 10/56. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. You place the order and can message me to discuss the vintage specs you want, the construction is between 2 to 3 months, but it can be more if I have over 12 orders ahead, I you want a detailed relic job, please message me. I construct this kind of necks following the vintage Fender specs the best I can, if you want a custom made vintage style neck, message me. I have the 2 pcs available and 1 piece, also the 70’s style too (bullet) take a look in my store. “DSL Custom Relic” is an independent entity and is not affiliated with, authorized, endorsed, or sponsored by Fender® Musical Instruments Corporation (FMIC). Fender®’,’Stratocaster’,’Telecaster’, and the distinct headstock designs of these guitars are registered trademarks of FMIC. Any use of these terms is strictly for identification and descriptive purposes.

]]> https://fenderstratocasterneck.com/2026/10/13/50s-stratocaster-neck-to-order-vintage-fender-specs-custom-heavy-relic/feed/ 0 https://fenderstratocasterneck.com/2026/09/22/2-piece-stratocaster-alder-body-honey-nitro-satin-fender-strat-specs/ https://fenderstratocasterneck.com/2026/09/22/2-piece-stratocaster-alder-body-honey-nitro-satin-fender-strat-specs/#comments Tue, 22 Sep 2026 10:24:57 +0000 https://fenderstratocasterneck.com/2026/09/22/2-piece-stratocaster-alder-body-honey-nitro-satin-fender-strat-specs/






NEW Stratocaster Body HSH Route HONEY Alder 2-Piece STRAT Body. Nitro Satin Finish- Fender Specs Alder: Alder is used extensively for bodies because of its lighter weight. Alder has been the mainstay for Fender bodies for many years and its characteristic tone has been a part of some of the most enduring pieces of modern day contemporary music. Warmoth, allparts, fender, musikraft, jamerson, g&l, custom shop, usa, mighty mite, wd Roasted Stratocaster Guitar Neck / STRAT-22 w/Warmoth Bone Nut.

]]> https://fenderstratocasterneck.com/2026/09/22/2-piece-stratocaster-alder-body-honey-nitro-satin-fender-strat-specs/feed/ 0 https://fenderstratocasterneck.com/2026/08/25/2-piece-3-8lb-stratocaster-alder-bodyvint-whitenitro-satin-fender-strat-specs/ https://fenderstratocasterneck.com/2026/08/25/2-piece-3-8lb-stratocaster-alder-bodyvint-whitenitro-satin-fender-strat-specs/#comments Tue, 25 Aug 2026 21:06:54 +0000 https://fenderstratocasterneck.com/2026/08/25/2-piece-3-8lb-stratocaster-alder-bodyvint-whitenitro-satin-fender-strat-specs/





NEW Stratocaster Body HSH Route Vintage White 3.8lb Alder 2-Piece STRAT Body. Nitro Satin Finish- Fender Specs Alder: Alder is used extensively for bodies because of its lighter weight. Alder has been the mainstay for Fender bodies for many years and its characteristic tone has been a part of some of the most enduring pieces of modern day contemporary music. Warmoth, allparts, fender, musikraft, jamerson, g&l, custom shop, usa, mighty mite, wd Roasted Stratocaster Guitar Neck / STRAT-22 w/Warmoth Bone Nut.

]]> https://fenderstratocasterneck.com/2026/08/25/2-piece-3-8lb-stratocaster-alder-bodyvint-whitenitro-satin-fender-strat-specs/feed/ 0 https://fenderstratocasterneck.com/2025/04/09/50s-60s-stratocaster-tele-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2025/04/09/50s-60s-stratocaster-tele-neck-to-order-vintage-fender-specs-custom-order/#comments Thu, 10 Apr 2025 01:39:03 +0000 https://fenderstratocasterneck.com/2025/04/09/50s-60s-stratocaster-tele-neck-to-order-vintage-fender-specs-custom-order/

























This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ 10″, 12″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. Please note this listing won’t include the bone nut, tuners or decal set up or installation. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I you want a detailed relic job, please message me. International buyers will be calculated Priority Int. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. I have the 2 pcs available and 1 piece, also the 70’s style too (bullet).

]]> https://fenderstratocasterneck.com/2025/04/09/50s-60s-stratocaster-tele-neck-to-order-vintage-fender-specs-custom-order/feed/ 0 https://fenderstratocasterneck.com/2025/03/05/50s-60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2025/03/05/50s-60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/#comments Thu, 06 Mar 2025 00:53:46 +0000 https://fenderstratocasterneck.com/2025/03/05/50s-60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/













This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. Please note this listing won’t include the bone nut, tuners or decal set up or installation. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I you want a detailed relic job, please message me. International buyers will be calculated Priority Int. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. I have the 2 pcs available and 1 piece, also the 70’s style too (bullet).

]]> https://fenderstratocasterneck.com/2025/03/05/50s-60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/feed/ 0 https://fenderstratocasterneck.com/2024/03/25/50s-60s-70s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2024/03/25/50s-60s-70s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/#comments Mon, 25 Mar 2024 18:29:59 +0000 https://fenderstratocasterneck.com/2024/03/25/50s-60s-70s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/













This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. Please note this listing won’t include the bone nut, tuners or decal set up or installation. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I you want a detailed relic job, please message me. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. I have the 2 pcs available and 1 piece, also the 70’s style too (bullet).

]]> https://fenderstratocasterneck.com/2024/03/25/50s-60s-70s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/feed/ 0 https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/#comments Fri, 01 Mar 2024 04:33:05 +0000 https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/













This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. For now I only have the 2 pcs available (60’s 59’s).

]]> https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/feed/ 0 https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/#comments Sat, 17 Feb 2024 03:34:46 +0000 https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/













This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. For now I only have the 2 pcs available (60’s 59’s).

]]> https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/feed/ 0