https://fenderstratocasterneck.com Fri, 01 May 2026 14:05:11 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/01/07/fender-licensed-vintage-maple-strat-neck-wd-snvm/ https://fenderstratocasterneck.com/2026/01/07/fender-licensed-vintage-maple-strat-neck-wd-snvm/#comments Wed, 07 Jan 2026 14:08:42 +0000 https://fenderstratocasterneck.com/2026/01/07/fender-licensed-vintage-maple-strat-neck-wd-snvm/


Genuine WD Music Fender. Vintage replacement neck for Fender® Stratocaster® guitars. This licensed Fender® neck combines the vintage appearance with some great modern features. It has the small peghead drilled to accept vintage (8.5mm) tuning keys. Honey gloss poly finish, 21 medium-jumbo frets, 10 in. Fingerboard radius, single action truss rod installed from the back, and covered with a skunk stripe, adjusting at the heel just like the originals. All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod. Which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod. Which adjusts only 1 way. All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or “blems”. Please contact customer service if you have any questions or concerns about your neck when it arrives. Some neck pocket modification may be required. We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.

]]> https://fenderstratocasterneck.com/2026/01/07/fender-licensed-vintage-maple-strat-neck-wd-snvm/feed/ 0 https://fenderstratocasterneck.com/2024/04/21/new-wd-fender-licensed-replacement-neck-for-strat-21-frets-maple-snvm/ https://fenderstratocasterneck.com/2024/04/21/new-wd-fender-licensed-replacement-neck-for-strat-21-frets-maple-snvm/#comments Sun, 21 Apr 2024 08:52:50 +0000 https://fenderstratocasterneck.com/2024/04/21/new-wd-fender-licensed-replacement-neck-for-strat-21-frets-maple-snvm/







NEW – Licensed Replacement Neck For Fender Strat. Replacement Vintage Stratocaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10″ radius, 1 5/8″ nut width, a comfortable’C’ shaped profile and a honey tinted gloss finish. Heel adjust truss rod location and 8.8 mm peg holes drilled for a vintage Kluson tuning machine as nature intended. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. WD neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required. Distributed by WD Music. Powered by SixBit’s eCommerce Solution.

]]> https://fenderstratocasterneck.com/2024/04/21/new-wd-fender-licensed-replacement-neck-for-strat-21-frets-maple-snvm/feed/ 0 https://fenderstratocasterneck.com/2024/02/26/new-wd-licensed-by-fender-21-fret-vintage-neck-for-stratocaster-c-maple-snvm/ https://fenderstratocasterneck.com/2024/02/26/new-wd-licensed-by-fender-21-fret-vintage-neck-for-stratocaster-c-maple-snvm/#comments Tue, 27 Feb 2024 04:21:36 +0000 https://fenderstratocasterneck.com/2024/02/26/new-wd-licensed-by-fender-21-fret-vintage-neck-for-stratocaster-c-maple-snvm/


WD® Licensed By Fender® Replacement 21 Fret Vintage Neck For Stratocaster® Modern C- Maple Replacement Vintage Stratocaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 inch radius, 1 5/8 inch nut width, a comfortable’C’ shaped profile and a honey tinted gloss finish. Heel adjust truss rod location and 8.8 mm peg holes drilled for a vintage Kluson tuning machine as nature intended. All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. WD does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that we sell WD does not hand-select necks based on appearance or weight. WD neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required. WD recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop.

]]> https://fenderstratocasterneck.com/2024/02/26/new-wd-licensed-by-fender-21-fret-vintage-neck-for-stratocaster-c-maple-snvm/feed/ 0