https://fenderstratocasterneck.com Fri, 07 Aug 2026 08:17:41 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/08/03/guitar-neck-rosewood-on-q-sawn-roast-maple-24-75-s-style-fits-fender-strat/ https://fenderstratocasterneck.com/2026/08/03/guitar-neck-rosewood-on-q-sawn-roast-maple-24-75-s-style-fits-fender-strat/#comments Mon, 03 Aug 2026 20:05:56 +0000 https://fenderstratocasterneck.com/2026/08/03/guitar-neck-rosewood-on-q-sawn-roast-maple-24-75-s-style-fits-fender-strat/












24.75 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 21 Stainless Steel “Medium/Jumbo” (H. 047″ W. 104″). Mother of Pearl Block (Acrylic). Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 24.75″ Conversion Scale (This neck is meant to convert a 25.5″ scale guitar to 24.75). 904 Thick at 1st fret. 959 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/08/03/guitar-neck-rosewood-on-q-sawn-roast-maple-24-75-s-style-fits-fender-strat/feed/ 0 https://fenderstratocasterneck.com/2026/08/02/ding-fender-strat-mim-neck-player-ii-series-rosewood-22-fret-9-5-stratocaster/ https://fenderstratocasterneck.com/2026/08/02/ding-fender-strat-mim-neck-player-ii-series-rosewood-22-fret-9-5-stratocaster/#comments Sun, 02 Aug 2026 19:58:04 +0000 https://fenderstratocasterneck.com/2026/08/02/ding-fender-strat-mim-neck-player-ii-series-rosewood-22-fret-9-5-stratocaster/

























THIS NECK WAS DROPPED AFTER WE DISASSEMBLED THE GUITAR – WHOOPS! THERE IS A DING ON THE EDGE OF THE HEADSTOCK AND A VERY SMALL DING ON THE FRETBOARD ON THE 22 FRET OVERHANG – SEE PHOTOS! This neck was removed from an un-played, mint condition Genuine Fender Player II Stratocaster guitar. The guitar was brand new and had never been played. The tuning keys are included! The tuners are Fender’s Classic Gear design. They have vintage styling with modern dual-pin stabilizers for easy replacement if desired. The photos are the actual neck you will receive. FEATURES: Maple neck with a Slab Rosewood Fingerboard and a walnut “skunk” stripe. Fingerboard with a f. Ingerboard radius of 9.5 (241mm) and smooth rolled edges. Neck finish is Satin Urethane finish on back of neck with Gloss Urethane Headstock face. Modern “C” shape neck profile. Fits Almost All Fender and Squier Brand Strat Bodies with a 4-Bolt Strat Heel Cutout. You can drill a “fifth” hole for mounting to a contour heel body. 22 medium jumbo frets. Slotted synthetic bone nut. White dot position inlays. Standard head adjust truss rod. 3/16 hex truss rod nut. 25.5 (648 mm) Scale Length. Dual guide pin tuner compatibility. Neck thickness at the first fret is +/. Neck thickness at the twelfth fret is +/. From the Fender Player II series of guitars and basses. No counterfeits, knock-offs, fakes or cheap imitations. No factory 2nds and defects masquerading as “used”. We are an authorized Fender dealer. This part was removed from a genuine Fender Guitar right out of the box. The guitar was removed, inspected and taken apart. The guitar had never been played. The photos are the actual part you will receive. Mobile device users: swipe right (or right arrow) for more item details. See “Item Details” under “About this Item” for more info. Everything about the neck is designed for fast and fluid playability, from the Modern “C”-profile with silky satin urethane finish on the back to the comfy 9.5-radius maple fingerboard with smooth rolled edges and 22 medium jumbo frets. ClassicGearT tuners ensure precise tuning stability for the flexibility to explore endless sonic possibilities. Crafted at Fender’s Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Stratocaster® guitar neck features a comfortable “modern C” profile and 9.5-radius rosewood fingerboard with 22 medium jumbo frets. A satin finish on the back offers smooth playability. It’s also serialized and stamped, with genuine “Original Contour Body” headstock decal. This replacement neck is for a Fender or Squier® by Fender guitar. Maple neck with walnut “skunk” stripe. Rosewood fingerboard with 9.5 radius. Pre-slotted synthetic bone nut. Six two-guide-pin tuning machine holes.

]]> https://fenderstratocasterneck.com/2026/08/02/ding-fender-strat-mim-neck-player-ii-series-rosewood-22-fret-9-5-stratocaster/feed/ 0 https://fenderstratocasterneck.com/2026/07/27/fender-chris-shiflett-telecaster-deluxe-neck-with-rosewood-fretboard-tuners/ https://fenderstratocasterneck.com/2026/07/27/fender-chris-shiflett-telecaster-deluxe-neck-with-rosewood-fretboard-tuners/#comments Mon, 27 Jul 2026 07:38:08 +0000 https://fenderstratocasterneck.com/2026/07/27/fender-chris-shiflett-telecaster-deluxe-neck-with-rosewood-fretboard-tuners/










Today, for your consideration – a 2013 Chris Shiflett Signature Telecaster Deluxe neck, complete with! This is a great neck for building out your dream TD. It comes equipped with upgraded Kluson Revolution tuners. The neck itself shows only minor playwear (see pics), but nothing that affects the use or overall feel when being played. I can’t use it properly for the Telecaster build project I’ve been working on, so I’m parting with it in hopes it can be picked up by someone who can better use it. I’m also open to serious offers, so please feel free to shoot your shot. Thanks for looking at my listing!

]]> https://fenderstratocasterneck.com/2026/07/27/fender-chris-shiflett-telecaster-deluxe-neck-with-rosewood-fretboard-tuners/feed/ 0 https://fenderstratocasterneck.com/2026/07/23/player-ii-jazzmaster-neck-9-5-radius-rosewood-fretboard-never-played/ https://fenderstratocasterneck.com/2026/07/23/player-ii-jazzmaster-neck-9-5-radius-rosewood-fretboard-never-played/#comments Thu, 23 Jul 2026 19:26:43 +0000 https://fenderstratocasterneck.com/2026/07/23/player-ii-jazzmaster-neck-9-5-radius-rosewood-fretboard-never-played/








The Player II Jazzmaster Neck by Fender is a high-quality guitar part designed for electric guitars. This particular neck features a natural rosewood fretboard with a 9.5 radius, offering a smooth and comfortable playing experience. With its sleek design and premium materials, this neck is perfect for jazz and rock musicians looking to upgrade their instrument for a more authentic and unique sound. Neck was bought directly from Fender and mounted to a guitar before I changed directions on it. Never played the neck. Will need final finish work done (ie – nut filing, rolling fretboard edges, etc). Does not include tuners or string trees.

]]> https://fenderstratocasterneck.com/2026/07/23/player-ii-jazzmaster-neck-9-5-radius-rosewood-fretboard-never-played/feed/ 0 https://fenderstratocasterneck.com/2026/07/20/reverse-headstock-maple-rosewood-slab-stratocaster-jumbo-rolledfrets-satin-nitro/ https://fenderstratocasterneck.com/2026/07/20/reverse-headstock-maple-rosewood-slab-stratocaster-jumbo-rolledfrets-satin-nitro/#comments Mon, 20 Jul 2026 19:17:52 +0000 https://fenderstratocasterneck.com/2026/07/20/reverse-headstock-maple-rosewood-slab-stratocaster-jumbo-rolledfrets-satin-nitro/

















A right handed Reverse Headstock Stratocaster Maple with Rosewood Jumbo Rolled Polished Stainless Steel Frets. 9.5 inch radius. Satin Nitro Vintage Finish. Exact replica and replacement for Fender Stratocaster. High-quality guitar bodies, neck, pickups, wiring, and hardware make a bigger difference than the logo on the headstock. Guitar Monkey prioritizes playability, never compromises on tone-critical components pickups, bridge, tuners. Left over from a Limited Run Custom Build. For Fender Strat electric guitar, great replacement. 100% new electric guitar neck, the neck and the fretboard are make of high quality Maple Neck with Rosewood Slab. Double Action Adjustable guitar truss rod. 22 fret guitar neck, the peg holes diameter is 10mm for tuner installation. With inlay dots on side (Manufactured Reverse). Maple, Rosewood SlabFender Stratocaster specs:Material: Maple Neck. Fret: 22 fret, jumboFretboard: Rosewood9.5 Inch Radius. Peg Holes : 10 mm / 0.4 inch. Finish: Satin Nitro Finish. Channeling the original spirit of Leo Fender-modular, serviceable, and built for players, not factories. The beauty of the Fender Telecaster and Fender Stratocaster is exactly that: bolt-on necks, simple routing, and parts you can swap without a luthier degree. That design invites customization. And yeah, once large-scale production took over at Fender Musical Instruments Corporation, cost efficiencies inevitably crept in-cheaper pots, generic pickups, multi-piece bodies, etc. Avoid paying for branding, marketing, and mass-production compromise. Discount Bodies, Neck, Pick ups, more. Check back in mid July forJuly: Block Inlay Necks, Roasted Mahogany Rosewood NecksJuly: Nitro Strat’s and TelesAug: Tele/Strat Hybrid Tummy and comfort cut Tele with Strat style tremolo and pickguard. Aug: Mahogany HH Tele w Tremolo. Mahogany Thinlines Tele Unfinished.

]]> https://fenderstratocasterneck.com/2026/07/20/reverse-headstock-maple-rosewood-slab-stratocaster-jumbo-rolledfrets-satin-nitro/feed/ 0 https://fenderstratocasterneck.com/2026/07/04/12-radius-flame-maple-rosewood-strat-stratocaster-neck-fits-warmoth-fender-fsre/ https://fenderstratocasterneck.com/2026/07/04/12-radius-flame-maple-rosewood-strat-stratocaster-neck-fits-warmoth-fender-fsre/#comments Sat, 04 Jul 2026 06:19:46 +0000 https://fenderstratocasterneck.com/2026/07/04/12-radius-flame-maple-rosewood-strat-stratocaster-neck-fits-warmoth-fender-fsre/









Flame Maple Rosewood Strat Neck. This is the neck you will receive. Super high grade flamed maple. Shaft Wood: Flame Maple. Right / Left Handed: Right. Neck Back Profile: Modern C. Tuner Hole Size: Modern 10 mm. Number of Frets: 22. Inlay Shape: Abalone Dots. Neck Heel Shape: Strat® Shape. Thickness at 1st fret: 21 mm. Thickness at 12th fret: 23 mm.

]]> https://fenderstratocasterneck.com/2026/07/04/12-radius-flame-maple-rosewood-strat-stratocaster-neck-fits-warmoth-fender-fsre/feed/ 0 https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/ https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/#comments Thu, 02 Jul 2026 06:15:45 +0000 https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/


Genuine WD Music Fender. Vintage Rosewood Strat Neck Soft V profile. Replacement Vintage Stratocaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 inch radius, 1 5/8 inch nut width, a comfortable soft’V’ profile and a honey tinted gloss finish. Rosewood finger board with a heel adjust truss rod location and 8.8 mm peg holes drilled for a vintage Kluson tuning machine as nature intended. All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod. Which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod. Which adjusts only 1 way. All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or “blems”. Please contact customer service if you have any questions or concerns about your neck when it arrives. Some neck pocket modification may be required. We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.

]]> https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/feed/ 0 https://fenderstratocasterneck.com/2026/06/30/roasted-maple-rosewood-strat-neck-satin-fits-warmoth-fender-bodies-0srl/ https://fenderstratocasterneck.com/2026/06/30/roasted-maple-rosewood-strat-neck-satin-fits-warmoth-fender-bodies-0srl/#comments Tue, 30 Jun 2026 06:11:49 +0000 https://fenderstratocasterneck.com/2026/06/30/roasted-maple-rosewood-strat-neck-satin-fits-warmoth-fender-bodies-0srl/







From the Guitar Closet. The frets have been leveled and dressed. This is the exact neck you will receive. Shaft Wood: Roasted Maple. Right / Left Handed: Right-Handed. Neck Back Profile: Modern C. Tuner Hole Size: Modern 10 mm. Fretboard Radius: 9.5. Number of Frets: 22. Inlay Shape: Standard Dots. Neck Heel Shape: Strat® Shape. Thickness at 1st fret: 21.5mm. Thickness at 12th fret: 23.0 mm.

]]> https://fenderstratocasterneck.com/2026/06/30/roasted-maple-rosewood-strat-neck-satin-fits-warmoth-fender-bodies-0srl/feed/ 0 https://fenderstratocasterneck.com/2026/06/21/fender-stratocaster-neck-2001-rosewood-board-fr-style-locking-nut-tuners-21-fret/ https://fenderstratocasterneck.com/2026/06/21/fender-stratocaster-neck-2001-rosewood-board-fr-style-locking-nut-tuners-21-fret/#comments Sun, 21 Jun 2026 17:42:51 +0000 https://fenderstratocasterneck.com/2026/06/21/fender-stratocaster-neck-2001-rosewood-board-fr-style-locking-nut-tuners-21-fret/




















2001 Fender Stratocaster neck with locking nut and chrome Fender tuners installed. Came off of a 2001 Strat. The frets are clean with no apparent notches or grooves. The rosewood slab is beautiful. It has 21 frets. It has one small ding (see pics) and a very small area of finish wear on the high E side, near the 3rd-5th frets, see pics. The neck is straight and the trussrod functions properly.

]]> https://fenderstratocasterneck.com/2026/06/21/fender-stratocaster-neck-2001-rosewood-board-fr-style-locking-nut-tuners-21-fret/feed/ 0 https://fenderstratocasterneck.com/2026/06/07/vintage-21-fret-roasted-maple-rosewood-strat-neck-satin-fits-fender-body-vsrt/ https://fenderstratocasterneck.com/2026/06/07/vintage-21-fret-roasted-maple-rosewood-strat-neck-satin-fits-fender-body-vsrt/#comments Sun, 07 Jun 2026 05:05:52 +0000 https://fenderstratocasterneck.com/2026/06/07/vintage-21-fret-roasted-maple-rosewood-strat-neck-satin-fits-fender-body-vsrt/







From the Gluitar Closet Roasted Maple Vintage Strat Neck Satin finish. 21 frets Truss rod adjust at heel The frets have been leveled and dressed Truss rod adjust at heel This is the neck you will receive Shaft Wood: Roasted Maple Fretboard Wood: Rosewood Finish: Satin Tinted Nut Width: 1-5/8″ Right / Left Handed: Right-Handed Neck Back Profile: Vintage C Frets: Medium Jumbo Tuner Hole Size: Vintage 8 mm Fretboard Radius: 9.5″ Number of Frets: 21 Inlay Shape: Standard Dots Inlay Material: White Side Dots: White Side Dots Heel width: 2-3/16 Neck Heel Shape: Strat® Shape Thickness at 1st fret: 21.5mm Thickness at 12th fret: 23.0 mm.

]]> https://fenderstratocasterneck.com/2026/06/07/vintage-21-fret-roasted-maple-rosewood-strat-neck-satin-fits-fender-body-vsrt/feed/ 0