https://fenderstratocasterneck.com Sun, 03 May 2026 14:10:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/04/24/stratocaster-22-stainles-steel-guitar-neck-roast-fitwarmoth-fender-strat2of4/ https://fenderstratocasterneck.com/2026/04/24/stratocaster-22-stainles-steel-guitar-neck-roast-fitwarmoth-fender-strat2of4/#comments Fri, 24 Apr 2026 11:52:43 +0000 https://fenderstratocasterneck.com/2026/04/24/stratocaster-22-stainles-steel-guitar-neck-roast-fitwarmoth-fender-strat2of4/









Some discolors in the wood. This will not affect the performance of the instrument. All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. NEW Roasted Maple Stratocaster Guitar Neck. Stainless Steel Frets w/Rounded Fret Ends These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. Even C Neck Contour. 21 mm at 1st fret =. 24 mm at 12 fret =. Neck Material: Maple 25.5 Scale (Standard Fender) Finish: Gloss 1 5/8s Nut Width Radius: 9.5, Medium C Back Contour Fret: 22 Medium Stainless Steel Frets (Rounded Ends) 10mm tuner holes. Standard Fender Heel Specs. Warmoth, allparts, fender, musikraft, jamerson, g&l, custom shop, usa, mighty mite, wd Quartersawn Roasted Stratocaster Guitar Neck / STRAT-22 w/Warmoth Bone Nut.

]]> https://fenderstratocasterneck.com/2026/04/24/stratocaster-22-stainles-steel-guitar-neck-roast-fitwarmoth-fender-strat2of4/feed/ 0 https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/ https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/#comments Sun, 05 Apr 2026 23:15:57 +0000 https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/












25.5 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 3a Roasted Curly Maple. 22 Jescar “Medium, Medium” Frets. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 860 Thick at 1st fret. 947 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/feed/ 0 https://fenderstratocasterneck.com/2025/02/23/stratocaster-unfinished-roast-stainlessvintage-stylefits-warmoth-fender-strat/ https://fenderstratocasterneck.com/2025/02/23/stratocaster-unfinished-roast-stainlessvintage-stylefits-warmoth-fender-strat/#comments Mon, 24 Feb 2025 00:18:12 +0000 https://fenderstratocasterneck.com/2025/02/23/stratocaster-unfinished-roast-stainlessvintage-stylefits-warmoth-fender-strat/







These have small discolors in the wood. This will not affect the performance of the instrument. All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. NEW- Stainless Steel Rounded Frets Unfinished Roasted Maple. Stratocaster Guitar Neck These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. 21 mm at 1st fret =. 23 mm at 12 fret =. 25.5 Scale (Standard Fender) Finish: Unfinished RAW Nut Width: 42mm, 1 5/8s. Radius: 9.5 Fret: 22 Medium Stainless Steel Frets, Rounded Ends 10mm tuner holes. Standard Fender Heel Specs. Warmoth, allparts, fender, musikraft, jamerson, g&l, custom shop, usa, mighty mite, wd Quartersawn Roasted Stratocaster Guitar Neck / STRAT-22 w/Warmoth Bone Nut.

]]> https://fenderstratocasterneck.com/2025/02/23/stratocaster-unfinished-roast-stainlessvintage-stylefits-warmoth-fender-strat/feed/ 0