https://fenderstratocasterneck.com Fri, 01 May 2026 14:05:11 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2025/04/09/50s-60s-stratocaster-tele-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2025/04/09/50s-60s-stratocaster-tele-neck-to-order-vintage-fender-specs-custom-order/#comments Thu, 10 Apr 2025 01:39:03 +0000 https://fenderstratocasterneck.com/2025/04/09/50s-60s-stratocaster-tele-neck-to-order-vintage-fender-specs-custom-order/

























This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ 10″, 12″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. Please note this listing won’t include the bone nut, tuners or decal set up or installation. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I you want a detailed relic job, please message me. International buyers will be calculated Priority Int. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. I have the 2 pcs available and 1 piece, also the 70’s style too (bullet).

]]> https://fenderstratocasterneck.com/2025/04/09/50s-60s-stratocaster-tele-neck-to-order-vintage-fender-specs-custom-order/feed/ 0 https://fenderstratocasterneck.com/2025/03/05/50s-60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2025/03/05/50s-60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/#comments Thu, 06 Mar 2025 00:53:46 +0000 https://fenderstratocasterneck.com/2025/03/05/50s-60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/













This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. Please note this listing won’t include the bone nut, tuners or decal set up or installation. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I you want a detailed relic job, please message me. International buyers will be calculated Priority Int. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. I have the 2 pcs available and 1 piece, also the 70’s style too (bullet).

]]> https://fenderstratocasterneck.com/2025/03/05/50s-60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/feed/ 0 https://fenderstratocasterneck.com/2024/07/02/fender-japan-st62-stratocaster-dk335-order-22f-neck-only-rosewood-34/ https://fenderstratocasterneck.com/2024/07/02/fender-japan-st62-stratocaster-dk335-order-22f-neck-only-rosewood-34/#comments Tue, 02 Jul 2024 18:26:45 +0000 https://fenderstratocasterneck.com/2024/07/02/fender-japan-st62-stratocaster-dk335-order-22f-neck-only-rosewood-34/













Please see pictures for details. ST62 NECK DK335 stamp 22 F which appears to be ORDER This is a very rare model. Fret remaining 70 80%. The operation works well. The sound output is also no problem. And the operation of each button is also comfortable. If that, please let us know within 3 days you got the item.

]]> https://fenderstratocasterneck.com/2024/07/02/fender-japan-st62-stratocaster-dk335-order-22f-neck-only-rosewood-34/feed/ 0 https://fenderstratocasterneck.com/2024/03/25/50s-60s-70s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2024/03/25/50s-60s-70s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/#comments Mon, 25 Mar 2024 18:29:59 +0000 https://fenderstratocasterneck.com/2024/03/25/50s-60s-70s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/













This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. Please note this listing won’t include the bone nut, tuners or decal set up or installation. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I you want a detailed relic job, please message me. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. I have the 2 pcs available and 1 piece, also the 70’s style too (bullet).

]]> https://fenderstratocasterneck.com/2024/03/25/50s-60s-70s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/feed/ 0 https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/#comments Fri, 01 Mar 2024 04:33:05 +0000 https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/













This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. For now I only have the 2 pcs available (60’s 59’s).

]]> https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/feed/ 0 https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/#comments Sat, 17 Feb 2024 03:34:46 +0000 https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/













This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. For now I only have the 2 pcs available (60’s 59’s).

]]> https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/feed/ 0