https://fenderstratocasterneck.com Sun, 11 Oct 2026 12:56:21 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/09/04/nos-allparts-licensed-rosewood-stratocaster-neck-with-binding/ https://fenderstratocasterneck.com/2026/09/04/nos-allparts-licensed-rosewood-stratocaster-neck-with-binding/#comments Fri, 04 Sep 2026 09:26:41 +0000 https://fenderstratocasterneck.com/2026/09/04/nos-allparts-licensed-rosewood-stratocaster-neck-with-binding/








#2 of 2, Ever so slightly less dark rosewood than the other listing. NOS Allparts licensed Fender Stratocaster neck with white binding. Modern 10mm tuning peg holes, heel truss and a bone nut. Nut width 38.87mm / 1.53″ Heel width 55.63mm / 2.19″ 7.25 radius Looks like a modern C on the profile 23mm/0.9thick.

]]> https://fenderstratocasterneck.com/2026/09/04/nos-allparts-licensed-rosewood-stratocaster-neck-with-binding/feed/ 0 https://fenderstratocasterneck.com/2026/08/17/genuine-wd-music-fender-licensed-vintage-rosewood-strat-fat-neck-snfdr/ https://fenderstratocasterneck.com/2026/08/17/genuine-wd-music-fender-licensed-vintage-rosewood-strat-fat-neck-snfdr/#comments Mon, 17 Aug 2026 20:49:41 +0000 https://fenderstratocasterneck.com/2026/08/17/genuine-wd-music-fender-licensed-vintage-rosewood-strat-fat-neck-snfdr/


Genuine WD Music Fender. Licensed Replacement Vintage Rosewood Strat Fat Neck SNFDR. WD’s newest Fender® Licensed neck design is based on an early 1960’s Stratocaster® to give you a real fat C-shaped contour and fill your hand. They say more mass equals more sustain and if that is the case, being almost an inch thick from the 1st fret through the 12th fret should give you the added sustain you’re looking for! Available in maple with maple or rosewood fretboards unfinished so you can use the finish you want. All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod which adjusts only 1 way. All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or “blems”. Please contact customer service if you have any questions or concerns about your neck when it arrives. Some neck pocket modification may be required. We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance. Fingerboard Radius = 10 in. Nut Width = 1 5/8 in. Profile Shape = U-Shape. Fret type and count = Medium 6150 / 21 frets. Tuner peghole size = 11/32 in. Neck Finish = unfinished. Truss Rod location = heel. Skunk Stripe = no. Neck and Fretboard Type = Maple / Rosewood. Heel Type = Standard Stratocaster. 1st Fret Thickness = 0.93 in. 12th Fret Thickness = 0.99 in. Fret Marker = Pearloid Dot.

]]> https://fenderstratocasterneck.com/2026/08/17/genuine-wd-music-fender-licensed-vintage-rosewood-strat-fat-neck-snfdr/feed/ 0 https://fenderstratocasterneck.com/2026/08/13/genuine-wd-music-fender-licensed-vintage-rosewood-strat-neck-snvr/ https://fenderstratocasterneck.com/2026/08/13/genuine-wd-music-fender-licensed-vintage-rosewood-strat-neck-snvr/#comments Thu, 13 Aug 2026 08:36:40 +0000 https://fenderstratocasterneck.com/2026/08/13/genuine-wd-music-fender-licensed-vintage-rosewood-strat-neck-snvr/


Genuine WD Music Fender. Licensed Replacement Vintage Rosewood Strat Neck SNVR. Replacement Vintage Stratocaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 inch radius, 1 5/8 inch nut width, a comfortable’C’ shaped profile and a honey tinted gloss finish. Rosewood finger board with a heel adjust truss rod location and 8.8 mm peg holes drilled for a vintage tuning machine as nature intended. All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod which adjusts only 1 way. All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or “blems”. Please contact customer service if you have any questions or concerns about your neck when it arrives. Some neck pocket modification may be required. We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.

]]> https://fenderstratocasterneck.com/2026/08/13/genuine-wd-music-fender-licensed-vintage-rosewood-strat-neck-snvr/feed/ 0 https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/ https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/#comments Thu, 02 Jul 2026 06:15:45 +0000 https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/


Genuine WD Music Fender. Vintage Rosewood Strat Neck Soft V profile. Replacement Vintage Stratocaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 inch radius, 1 5/8 inch nut width, a comfortable soft’V’ profile and a honey tinted gloss finish. Rosewood finger board with a heel adjust truss rod location and 8.8 mm peg holes drilled for a vintage Kluson tuning machine as nature intended. All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod. Which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod. Which adjusts only 1 way. All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or “blems”. Please contact customer service if you have any questions or concerns about your neck when it arrives. Some neck pocket modification may be required. We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.

]]> https://fenderstratocasterneck.com/2026/07/02/fender-licensed-vintage-rosewood-strat-neck-soft-v-profile-wd-snvsvr/feed/ 0 https://fenderstratocasterneck.com/2026/06/11/fender-licensed-pau-ferro-stratocasterstrat-neck-wd-snmcpf/ https://fenderstratocasterneck.com/2026/06/11/fender-licensed-pau-ferro-stratocasterstrat-neck-wd-snmcpf/#comments Thu, 11 Jun 2026 17:17:46 +0000 https://fenderstratocasterneck.com/2026/06/11/fender-licensed-pau-ferro-stratocasterstrat-neck-wd-snmcpf/






Genuine WD Music Fender® Licensed Replacement Strat Neck with 22 fret Pau Ferro Fingerboard SNMCPF. Replacement Stratocaster® neck with 22 medium jumbo frets, 12 inch radius, 1 11/16 inch nut width, unfinished. Double action truss rod with headstock adjustment location, Pau Ferro finger board with 10mm peg holes drilled for a modern sealed or diecast tuning machine. Will also accept adapter bushings if you want to retro fit for a vintage look by using Kluson tuning machines. This neck is made from maple and has a Pau Ferro fingerboard. Pau Ferro (Machaerium villosum or schleroxylon), also known as Morado, Santos Rosewood, or Bolivian Rosewood has many of the qualities that are highly regarded in a fingerboard wood. It’s stable, abrasion resistant, hard, attractive, exotic and has good compression strength parallel to the grain. As with all exotic material, grain, pattern and color can vary from piece to piece. The photographs show are representative only and grain pattern will not be exactly as shown. All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod which adjusts only 1 way. All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or “blems”. Please contact customer service if you have any questions or concerns about your neck when it arrives. Some neck pocket modification may be required. We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.

]]> https://fenderstratocasterneck.com/2026/06/11/fender-licensed-pau-ferro-stratocasterstrat-neck-wd-snmcpf/feed/ 0 https://fenderstratocasterneck.com/2026/05/30/new-allparts-fender-licensed-maple-strat-neck-7-14-r-nitro-finish-smnf/ https://fenderstratocasterneck.com/2026/05/30/new-allparts-fender-licensed-maple-strat-neck-7-14-r-nitro-finish-smnf/#comments Sun, 31 May 2026 04:22:48 +0000 https://fenderstratocasterneck.com/2026/05/30/new-allparts-fender-licensed-maple-strat-neck-7-14-r-nitro-finish-smnf/







NEW – Fender Licensed Replacement Neck For Strat – #SMNF. Solid Maple With Vintage Tinted Nitrocellulose Finish! 043″, 7.25″ Radius. 1-5/8″ Nut Width, 2-3/16″ Heel Width. 340 Tuner Hole Diameter. Truss Rod Adjustment at Heel. 87 Thick at 1st Fret. 97 Thick at 12th Fret. Wood grain varies from neck to neck. Your neck may differ slightly from what is pictured. All necks may require fret leveling and polish. This is normal and not a defect. To protect against the effects of moisture, we recommend sealing unfinished necks prior to installation. Powered by SixBit’s eCommerce Solution.

]]> https://fenderstratocasterneck.com/2026/05/30/new-allparts-fender-licensed-maple-strat-neck-7-14-r-nitro-finish-smnf/feed/ 0 https://fenderstratocasterneck.com/2026/03/28/new-allparts-lmo-fender-licensed-neck-for-stratocast-solid-1-piece-maple-japan-2/ https://fenderstratocasterneck.com/2026/03/28/new-allparts-lmo-fender-licensed-neck-for-stratocast-solid-1-piece-maple-japan-2/#comments Sat, 28 Mar 2026 07:52:44 +0000 https://fenderstratocasterneck.com/2026/03/28/new-allparts-lmo-fender-licensed-neck-for-stratocast-solid-1-piece-maple-japan-2/








The Allparts LMO replacement neck for Stratocaster® is officially licensed by Fender® and made to exacting quality standards in Japan. Offering a 7.25″ radius fretboard, “bullet” truss rod, and large “CBS headstock, the LMO is a true throwback to the 70s era of rock n’ roll! Unfinished and ready to spray, you can finish our LMO any way you’d like! Scale Length: 25.5. Neck Profile Shape: C. Frets: 21 vintage frets. Fretboard Radius: 7.25. Inlays: Black fretboard and side marker dots. S: Vintage 2-step hole. 0.34 (8.5mm) bushing-hole diameter. 0.25 (6.5mm) post-hole diameter. Truss Rod Adjustment Location: Headstock. 0.85 at first fret. 0.96 at twelfth fret. Wood grain varies from neck to neck. Your neck may differ slightly from what is pictured. All necks may require fret leveling and polish. This is normal and not a defect. To protect against the effects of moisture, we recommend sealing unfinished necks prior to installation.

]]> https://fenderstratocasterneck.com/2026/03/28/new-allparts-lmo-fender-licensed-neck-for-stratocast-solid-1-piece-maple-japan-2/feed/ 0 https://fenderstratocasterneck.com/2026/02/10/new-allparts-fender-licensed-neck-for-strat-aged-satin-poly-finish-srvf-c/ https://fenderstratocasterneck.com/2026/02/10/new-allparts-fender-licensed-neck-for-strat-aged-satin-poly-finish-srvf-c/#comments Tue, 10 Feb 2026 18:55:45 +0000 https://fenderstratocasterneck.com/2026/02/10/new-allparts-fender-licensed-neck-for-strat-aged-satin-poly-finish-srvf-c/







NEW – Fender Replacement Neck For Strat – #SRVF-C. Solid maple with unique aged satin tinted polyurethane finish (simulates a vintage neck with aging in normal wear spots). 1-5/8″ Nut Width, 2-3/16″ Heel Width. 340 Tuner Hole Diameter. Truss Rod Adjustment at Heel. 85 Thick at 1st Fret. 95 Thick at 12th Fret. Wood grain varies from neck to neck. Your neck may differ slightly from what is pictured. All necks may require fret leveling and polish. This is normal and not a defect. To protect against the effects of moisture, we recommend sealing unfinished necks prior to installation. Powered by SixBit’s eCommerce Solution.

]]> https://fenderstratocasterneck.com/2026/02/10/new-allparts-fender-licensed-neck-for-strat-aged-satin-poly-finish-srvf-c/feed/ 0 https://fenderstratocasterneck.com/2026/01/07/fender-licensed-vintage-maple-strat-neck-wd-snvm/ https://fenderstratocasterneck.com/2026/01/07/fender-licensed-vintage-maple-strat-neck-wd-snvm/#comments Wed, 07 Jan 2026 14:08:42 +0000 https://fenderstratocasterneck.com/2026/01/07/fender-licensed-vintage-maple-strat-neck-wd-snvm/


Genuine WD Music Fender. Vintage replacement neck for Fender® Stratocaster® guitars. This licensed Fender® neck combines the vintage appearance with some great modern features. It has the small peghead drilled to accept vintage (8.5mm) tuning keys. Honey gloss poly finish, 21 medium-jumbo frets, 10 in. Fingerboard radius, single action truss rod installed from the back, and covered with a skunk stripe, adjusting at the heel just like the originals. All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod. Which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod. Which adjusts only 1 way. All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or “blems”. Please contact customer service if you have any questions or concerns about your neck when it arrives. Some neck pocket modification may be required. We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.

]]> https://fenderstratocasterneck.com/2026/01/07/fender-licensed-vintage-maple-strat-neck-wd-snvm/feed/ 0 https://fenderstratocasterneck.com/2025/12/03/new-allparts-licensed-by-fender-sro-62-replacement-neck-for-stratocaster/ https://fenderstratocasterneck.com/2025/12/03/new-allparts-licensed-by-fender-sro-62-replacement-neck-for-stratocaster/#comments Thu, 04 Dec 2025 00:53:44 +0000 https://fenderstratocasterneck.com/2025/12/03/new-allparts-licensed-by-fender-sro-62-replacement-neck-for-stratocaster/








The Allparts SRO-62 replacement neck for Stratocaster® is officially licensed by Fender® and made to exacting quality standards in Japan. Staying true to Fender’s® 1962 spec, our SRO-62 offers a pre-radiused neck with veneered rosewood fretboard. Cut” fretboards, the SRO-62 offers a “lam cut fretboard giving more surface contact between neck and fretboard adding a stronger joint for a stiffer and more stable neck. With it’s vintage frets and 7.25 fretboard radius, this neck is a true throwback from the golden era of rock n’ roll! Unfinished and ready to spray, you can finish our SRO-62 any way you’d like! Scale Length: 25.5. Neck Profile Shape: C. Frets: Tall (0.079″ x 0.043″). Wood: Maple with veneered rosewood fretboard. Fretboard Radius: 7.25. Inlays: White fretboard and side marker dots. Tuning Peg Holes: Vintage 2-step hole. 0.34 (8.5mm) bushing-hole diameter. 0.25 (6.5mm) post-hole diameter. Truss Rod Adjustment Location: Heel. 0.85 at first fret. 0.96 at twelfth fret. Wood grain varies from neck to neck. Your neck may differ slightly from what is pictured. All necks may require fret leveling and polish. This is normal and not a defect. To protect against the effects of moisture, we recommend sealing unfinished necks prior to installation.

]]> https://fenderstratocasterneck.com/2025/12/03/new-allparts-licensed-by-fender-sro-62-replacement-neck-for-stratocaster/feed/ 0