https://fenderstratocasterneck.com Tue, 03 Nov 2026 22:41:10 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/11/03/1979-fender-usa-american-stratocaster-electric-guitar-neck-maple-cbs-scalloped/ https://fenderstratocasterneck.com/2026/11/03/1979-fender-usa-american-stratocaster-electric-guitar-neck-maple-cbs-scalloped/#comments Tue, 03 Nov 2026 22:41:10 +0000 https://fenderstratocasterneck.com/2026/11/03/1979-fender-usa-american-stratocaster-electric-guitar-neck-maple-cbs-scalloped/

























Vintage Strat neck 1979 USA. This one’s not super beefy I have a few 79s this one’s has a great profile With a scalloped fretboard which was done professionally by jd rock and roll axe. The work looks pretty solid. I played the guitar and it really isn’t that different from a regular fretboard to me. The neck is in good condition. It does have fret wear and extra holes in the heel. The micro tilt plate is missing. No extra tuner holes. Although it has 3 small holes that were plugged. Perhaps a Floyd rose type lock. The nut is in good condition. No damage and the neck is straight. Vintage 70s stuff scalloped neck. Popular with some players.

]]> https://fenderstratocasterneck.com/2026/11/03/1979-fender-usa-american-stratocaster-electric-guitar-neck-maple-cbs-scalloped/feed/ 0 https://fenderstratocasterneck.com/2026/11/03/partscaster-loaded-body-stratocaster-fender-suhr-pickups-smugglers-cut/ https://fenderstratocasterneck.com/2026/11/03/partscaster-loaded-body-stratocaster-fender-suhr-pickups-smugglers-cut/#comments Tue, 03 Nov 2026 10:18:22 +0000 https://fenderstratocasterneck.com/2026/11/03/partscaster-loaded-body-stratocaster-fender-suhr-pickups-smugglers-cut/




















This body started out light weight and was modified with a “smuggler’s cut” to make the build even lighter. This is a full build now and I do not have a weight for body anymore before having parts added, rest assured, it was the lightest body I could find at the time, and I did not care about paying extra when it was bought. The pickups are all Suhr pickups. The Humbucker is a Pete Thorn “Thornbucker” and the middle and neck pickups are the Suhr V63+ pickups. The wiring is special since there is a “Double Waffer” 5-way switch installed with jumpers and resistors in the correct places to make sure that 250k is going to the singlecoils and that 500k is going to the humbucker ensuring that the best tones are reached for all the pickups. The 5 way switch works as follows.. Position 1 – humbucker. There are no push-pulls, but the humbucker is splitting in position 2 where you would want it to be (easy to navigate and great sounding). Included are the strap locks that go to the strap buttons already installed on the guitar and back cover plate. I included 5 springs on the tremolo in case that is what you were looking for in that way. All hardware (excluding pickguard) has been aged. Neckplate has serial number stamped as well for fun. Note: last 3 pictures show body with neck attached for reference only… This guitar has no more than 4 hours play time on it.

]]> https://fenderstratocasterneck.com/2026/11/03/partscaster-loaded-body-stratocaster-fender-suhr-pickups-smugglers-cut/feed/ 0 https://fenderstratocasterneck.com/2026/11/02/vintage-1977-fender-maple-electric-guitar-neck-amber-finish-serialmpn-s777425/ https://fenderstratocasterneck.com/2026/11/02/vintage-1977-fender-maple-electric-guitar-neck-amber-finish-serialmpn-s777425/#comments Mon, 02 Nov 2026 22:16:46 +0000 https://fenderstratocasterneck.com/2026/11/02/vintage-1977-fender-maple-electric-guitar-neck-amber-finish-serialmpn-s777425/
















Vintage 1977 Fender Stratocaster Neck CBS Large Headstock – Professionally Scalloped – Maple DESCRIPTION: Up for sale is a vintage 1977 Fender Stratocaster neck featuring the iconic CBS-era large headstock and bullet truss rod. The serial number prefix is S7, dating it firmly to 1977. This neck is a premium, high-performance player’s dream. It has been professionally scalloped and refretted, completely turning it into an incredible, turn-key solution for a Ritchie Blackmore or Yngwie Malmsteen style tribute build. Key Details & Condition: Wood & Finish: One-piece maple construction with a gorgeous, naturally aged vintage yellow/amber tint. Scallop Job: Incredibly smooth, high-quality, professional scallop job across the entire fretboard. No rough spots or sloppy DIY work. Frets: Refretted with tall jumbo frets when it was scalloped. They are in like-new condition with 100% life left, excellent height, and zero wear. Truss Rod: Tested and turns flawlessly in both directions. The bullet adjustment nut is clean and unstripped. Hardware Included: Comes with the original matching 1977 serialized 3-bolt neck plate and original neck screws. Hardware Missing: No tuners and no nut are included (perfect candidate for your preferred nut setup). The neck heel micro-tilt area is completely intact. This is a straight, structurally sound, and beautiful vintage neck that plays lightning-fast. Please see all photos for a close look at the quality of the scallop job and fret life. Feel free to send a message if you have any questions!

]]> https://fenderstratocasterneck.com/2026/11/02/vintage-1977-fender-maple-electric-guitar-neck-amber-finish-serialmpn-s777425/feed/ 0 https://fenderstratocasterneck.com/2026/11/02/so-fender-makes-junk-huh-think-again-this-ultra-ii-neck-is-shocking/ https://fenderstratocasterneck.com/2026/11/02/so-fender-makes-junk-huh-think-again-this-ultra-ii-neck-is-shocking/#comments Mon, 02 Nov 2026 10:14:37 +0000 https://fenderstratocasterneck.com/2026/11/02/so-fender-makes-junk-huh-think-again-this-ultra-ii-neck-is-shocking/ ]]> https://fenderstratocasterneck.com/2026/11/02/so-fender-makes-junk-huh-think-again-this-ultra-ii-neck-is-shocking/feed/ 0 https://fenderstratocasterneck.com/2026/10/31/stratocaster-unfinished-22-fretsvintage-styleroundedfits-warmoth-fender-strat/ https://fenderstratocasterneck.com/2026/10/31/stratocaster-unfinished-22-fretsvintage-styleroundedfits-warmoth-fender-strat/#comments Sat, 31 Oct 2026 19:33:58 +0000 https://fenderstratocasterneck.com/2026/10/31/stratocaster-unfinished-22-fretsvintage-styleroundedfits-warmoth-fender-strat/







These have small discolors in the wood. This will not affect the performance of the instrument. All of our Our Necks have been Dressed. This includes Fret Leveling, Crowning, and Polishing. NEW- Stainless Steel Rounded Frets Roasted Maple Stratocaster Guitar Neck These necks are ready to install. Adjust the truss and they are good to go. Bone Nut (Installed) M. 21 mm at 1st fret =. 23 mm at 12 fret =. 25.5 Scale (Standard Fender) Finish: Unfinished Nut Width: 42mm, 1 5/8s. Radius: 9.5 Fret: 22 Medium Stainless Steel Frets, Rounded Ends 10mm tuner holes. Standard Fender Heel Specs. Warmoth, allparts, fender, musikraft, jamerson, g&l, custom shop, usa, mighty mite, wd Quartersawn Roasted Stratocaster Guitar Neck / STRAT-22 w/Warmoth Bone Nut.

]]> https://fenderstratocasterneck.com/2026/10/31/stratocaster-unfinished-22-fretsvintage-styleroundedfits-warmoth-fender-strat/feed/ 0 https://fenderstratocasterneck.com/2026/10/30/warmoth-fender-modern-strat-stratocaster-guitar-neck-6115-ss-birdseye-maple/ https://fenderstratocasterneck.com/2026/10/30/warmoth-fender-modern-strat-stratocaster-guitar-neck-6115-ss-birdseye-maple/#comments Fri, 30 Oct 2026 19:30:24 +0000 https://fenderstratocasterneck.com/2026/10/30/warmoth-fender-modern-strat-stratocaster-guitar-neck-6115-ss-birdseye-maple/




















This appears to be virtually unused. I put the Fender decals on it. They are removable by simply rubbing them with a wet cloth. Or you can seal them on yourself. I always leave mine unsealed and they stay on forever as long as you don’t intentionally remove them. I will remove or seal them if you wish. Gotoh Tuners, String Tree included. I believe the spec sheet in the photos is accurate, but certain things like Dot Material are a guess. But it is clearly 6115 Stainless Steel why would you use anything else? , 1.7 inch (43mm) neck width, Warmoth 10 – 16 inch radius. It is a Standard Thin profile neck and is “Modern” construction meaning it has the very useful (life changing) side access truss rod adjustment. I don’t know if this is 3A or 4A birdseye. 4A is only sometimes available. 3A is all that’s available now. This one looks better than the 3A examples I see on their site now. It is a standard Fender scale neck meant for use with a standard Fender scale set up. It is NOT a small scale. You’d be hard pressed to find any sign of use on it.

]]> https://fenderstratocasterneck.com/2026/10/30/warmoth-fender-modern-strat-stratocaster-guitar-neck-6115-ss-birdseye-maple/feed/ 0 https://fenderstratocasterneck.com/2026/10/30/wenge-strat-guitar-neck-satin-stratocaster-fits-warmoth-fender-bodies-ws3-2/ https://fenderstratocasterneck.com/2026/10/30/wenge-strat-guitar-neck-satin-stratocaster-fits-warmoth-fender-bodies-ws3-2/#comments Fri, 30 Oct 2026 07:28:57 +0000 https://fenderstratocasterneck.com/2026/10/30/wenge-strat-guitar-neck-satin-stratocaster-fits-warmoth-fender-bodies-ws3-2/






Wenge Strat Neck Satin. This is the exact neck you will receive. The frets have been leveled and dressed. Right / Left Handed: Right-Handed. Neck Back Profile: Vintage C. Frets: Stainless Medium Jumbo. Tuner Hole Size: Modern 10 mm. Fretboard Radius: 9.5. Number of Frets: 22. Inlay Shape: Standard Dots. Neck Heel Shape: Strat® Shape. Thickness at 1st fret: 21 mm. Thickness at 12th fret: 23 mm.

]]> https://fenderstratocasterneck.com/2026/10/30/wenge-strat-guitar-neck-satin-stratocaster-fits-warmoth-fender-bodies-ws3-2/feed/ 0 https://fenderstratocasterneck.com/2026/10/29/fender-vintera-mod70s-stratocaster-neck-maple-4/ https://fenderstratocasterneck.com/2026/10/29/fender-vintera-mod70s-stratocaster-neck-maple-4/#comments Thu, 29 Oct 2026 19:27:33 +0000 https://fenderstratocasterneck.com/2026/10/29/fender-vintera-mod70s-stratocaster-neck-maple-4/




There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. This genuine Fender Stratocaster neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring an “early 70’s C” neck profile and 9.5-radius maple fingerboard with 21 medium jumbo frets, for modern playing feel. Although this neck features a 3-bolt design typical of’70s Strats, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies. The synthetic bone nut is pre-slotted with “pilot” grooves for accurate spacing when filing the final string slots. Fender Vintera Mod’70s Stratocaster Neck Maple. The perfect way to give your Strat® authentic Fender feel, this replacement neck even sports the CBS era logo and a Bullet truss rod on the larger headstock. Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender. Com. Roasted maple neck “Early 70’s C”-shaped profile; 9.5-radius maple fingerboard 21 medium jumbo frets; pre-slotted synthetic bone nut Gloss urethane finish on fingerboard and headstock face; satin finish on back of neck Bullet-style truss rod adjustment. For example, if your order is placed AND paid for at 1 p. Store Policies If you’re not satisfied, neither are we. It’s that simple. Be in brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings, or scrapes on the instrument or collateral materials.

]]> https://fenderstratocasterneck.com/2026/10/29/fender-vintera-mod70s-stratocaster-neck-maple-4/feed/ 0 https://fenderstratocasterneck.com/2026/10/28/fender-japan-mij-67-stratocaster-guitar-neck/ https://fenderstratocasterneck.com/2026/10/28/fender-japan-mij-67-stratocaster-guitar-neck/#comments Wed, 28 Oct 2026 19:23:41 +0000 https://fenderstratocasterneck.com/2026/10/28/fender-japan-mij-67-stratocaster-guitar-neck/









Up for sale is a Fender Japan 67 Stratocaster neck. It is in pretty good shape. It has a few issues. One, someone put a different tree on it at some point and the filled holes are left. Frets are fine, most life left and insignificant wear. Headstock and back of neck are pretty clean for the age. The main issue is the truss rod is almost to the maximum. It has maybe 1/3 turn left. As such, the neck played fine when strung.

]]> https://fenderstratocasterneck.com/2026/10/28/fender-japan-mij-67-stratocaster-guitar-neck/feed/ 0 https://fenderstratocasterneck.com/2026/10/28/fender-standard-telecaster-tele-neck-tuners-modern-c-guitar-part-laurel/ https://fenderstratocasterneck.com/2026/10/28/fender-standard-telecaster-tele-neck-tuners-modern-c-guitar-part-laurel/#comments Wed, 28 Oct 2026 07:20:57 +0000 https://fenderstratocasterneck.com/2026/10/28/fender-standard-telecaster-tele-neck-tuners-modern-c-guitar-part-laurel/















Used For Sale- Get it fast. Fender Telecaster 6-string Fender Standard Telecaster neck and Indian laurel fretboard. Specifications include the following: Neck. Specifications Neck Material: Maple Neck. Finish: Satin urethane with gloss urethane headstock face. Neck Shape: Modern “C” Neck Construction. Bolt-on Scale Length: 25.5 (648 mm). Nut Material: graphtech tusq xl nut. Nut Width: 1.6875 (42.86 mm). Truss Rod: Dual-action with head adjustment (4 mm hex nut). Fretboard Specifications: Fingerboard Material: Indian laurel. Fingerboard Radius: 9.5 (241 mm). Number of Frets: 21 Fret Size: Medium jumbo. Position Inlays: White dots Side Dots: White. Came on a new Olympic white fender standard telecaster, the only ” upgrade ” I’ve done was install a tusq XL but as I really don’t prefer the micarta or melamine nuts that are used on these type of fender guitars. I’ve never had fret buzz or any issues with the neck and it has been mounted on a fender player series mim telecaster and squier bodies with no issues using ashtray bridges as well as modern compensated bridges. Neck is straight, truss rod works correctly in both directions and frets have plenty of life left in them (at least 90% left).

]]> https://fenderstratocasterneck.com/2026/10/28/fender-standard-telecaster-tele-neck-tuners-modern-c-guitar-part-laurel/feed/ 0