https://fenderstratocasterneck.com Tue, 27 Oct 2026 19:18:13 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/10/24/60s-strat-tele-neck-b-rosewood-master-grade-to-order-fender-specs-custom/ https://fenderstratocasterneck.com/2026/10/24/60s-strat-tele-neck-b-rosewood-master-grade-to-order-fender-specs-custom/#comments Sat, 24 Oct 2026 06:54:28 +0000 https://fenderstratocasterneck.com/2026/10/24/60s-strat-tele-neck-b-rosewood-master-grade-to-order-fender-specs-custom/












This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. I have in stock 7 B rosewood Master Grade (dark Chocolate) bright resonance. Hard rock maple flat sawn cut or rift sawn. Heavy relic finish if needed. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall) if you need a different fret wire just message me. 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes for vintage kluson tuning pegs. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. You place the order and can message me to discuss the vintage specs you want, t he construction is between 3 to 4 months, but it can be more if I have over 12 orders ahead, I you want a detailed relic job, please message me, Check out my feedback! I construct this kind of necks following the vintage Fender specs the best I can, if you want a custom made vintage style neck, message me. I have the 2 pcs available and 1 piece, also the 70’s style too (bullet) take a look in my store. “DSL Custom Relic” is an independent entity and is not affiliated with, authorized, endorsed, or sponsored by Fender® Musical Instruments Corporation (FMIC). Fender®’,’Stratocaster’,’Telecaster’, and the distinct headstock designs of these guitars are registered trademarks of FMIC. Any use of these terms is strictly for identification and descriptive purposes.

]]> https://fenderstratocasterneck.com/2026/10/24/60s-strat-tele-neck-b-rosewood-master-grade-to-order-fender-specs-custom/feed/ 0 https://fenderstratocasterneck.com/2026/10/13/50s-stratocaster-neck-to-order-vintage-fender-specs-custom-heavy-relic/ https://fenderstratocasterneck.com/2026/10/13/50s-stratocaster-neck-to-order-vintage-fender-specs-custom-heavy-relic/#comments Tue, 13 Oct 2026 13:01:44 +0000 https://fenderstratocasterneck.com/2026/10/13/50s-stratocaster-neck-to-order-vintage-fender-specs-custom-heavy-relic/













This is a listing to Order a vintage reissue made by hand following the Fender standard icludes all the relic you want! You can choose your specs. The finish is nitro. Maple flat sawn cut or rift sawn AAA Flame. Black 1/4′ fretboard dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall) if you need a different fret wire just message me. 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius or 10″, 12″. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. D or U profila, also oval C, large C, soft V or hard V, 10/56. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. You place the order and can message me to discuss the vintage specs you want, the construction is between 2 to 3 months, but it can be more if I have over 12 orders ahead, I you want a detailed relic job, please message me. I construct this kind of necks following the vintage Fender specs the best I can, if you want a custom made vintage style neck, message me. I have the 2 pcs available and 1 piece, also the 70’s style too (bullet) take a look in my store. “DSL Custom Relic” is an independent entity and is not affiliated with, authorized, endorsed, or sponsored by Fender® Musical Instruments Corporation (FMIC). Fender®’,’Stratocaster’,’Telecaster’, and the distinct headstock designs of these guitars are registered trademarks of FMIC. Any use of these terms is strictly for identification and descriptive purposes.

]]> https://fenderstratocasterneck.com/2026/10/13/50s-stratocaster-neck-to-order-vintage-fender-specs-custom-heavy-relic/feed/ 0 https://fenderstratocasterneck.com/2026/08/31/fender-custom-shop-masterbuilt-ww10-1961-strat-by-jason-smith-heavy-relic-brw-sn-r146830/ https://fenderstratocasterneck.com/2026/08/31/fender-custom-shop-masterbuilt-ww10-1961-strat-by-jason-smith-heavy-relic-brw-sn-r146830/#comments Mon, 31 Aug 2026 21:19:32 +0000 https://fenderstratocasterneck.com/2026/08/31/fender-custom-shop-masterbuilt-ww10-1961-strat-by-jason-smith-heavy-relic-brw-sn-r146830/ ]]> https://fenderstratocasterneck.com/2026/08/31/fender-custom-shop-masterbuilt-ww10-1961-strat-by-jason-smith-heavy-relic-brw-sn-r146830/feed/ 0 https://fenderstratocasterneck.com/2026/08/16/original-custom-fender-stratocaster-maple-guitar-neck-with-headstock/ https://fenderstratocasterneck.com/2026/08/16/original-custom-fender-stratocaster-maple-guitar-neck-with-headstock/#comments Sun, 16 Aug 2026 20:47:43 +0000 https://fenderstratocasterneck.com/2026/08/16/original-custom-fender-stratocaster-maple-guitar-neck-with-headstock/







Original Custom Fender Stratocaster Maple Guitar Neck w/ Headstock.

]]> https://fenderstratocasterneck.com/2026/08/16/original-custom-fender-stratocaster-maple-guitar-neck-with-headstock/feed/ 0 https://fenderstratocasterneck.com/2026/08/14/fender-usa-custom-shop-tomatillo-ii-relic-stratocaster-neck-tuners-maple/ https://fenderstratocasterneck.com/2026/08/14/fender-usa-custom-shop-tomatillo-ii-relic-stratocaster-neck-tuners-maple/#comments Fri, 14 Aug 2026 20:40:43 +0000 https://fenderstratocasterneck.com/2026/08/14/fender-usa-custom-shop-tomatillo-ii-relic-stratocaster-neck-tuners-maple/









You’re looking at my killer near-mint American Fender Custom Shop Vintage Tomatillo Strat Relic neck with tuners. This is a fantastic top-of-the-line Fender reissue with aged nitrocellulose lacquer finish. Everyone that has played this neck wants it – there’s some kind of tone magic in the rift-sawn maple, this thing is like a tuning fork it vibrates so much. I had it on a one-piece swamp ash body, and that axe rang for days. Everything’s in perfect condition – the relic’ing is Fender, and I think it’s the most “real” that I’ve seen. Description: American Fender Custom Shop Tomatillo Relic Neck & Tuners- Rift Sawn Maple Neck- 10/56 “V” Back-Shape- 25.5″ Scale Length- 7.25 to 9.5″ Compound Radius- Neck Spec 1st. 940 / 12th fret. 970″ – 1.650″ Nut Width- 21 Medium Vintage Frets (Jescar 47095)- nitro lacquer finish- Genuine Fender. Serial #: (per included hang tag) CZ561824.

]]> https://fenderstratocasterneck.com/2026/08/14/fender-usa-custom-shop-tomatillo-ii-relic-stratocaster-neck-tuners-maple/feed/ 0 https://fenderstratocasterneck.com/2026/07/26/fender-custom-shop-fat-maple-stratocaster-neck-2011/ https://fenderstratocasterneck.com/2026/07/26/fender-custom-shop-fat-maple-stratocaster-neck-2011/#comments Sun, 26 Jul 2026 19:36:18 +0000 https://fenderstratocasterneck.com/2026/07/26/fender-custom-shop-fat-maple-stratocaster-neck-2011/
















Fender custom shop fat maple stratocaster neck. Frets are wide and low with no wear. Frets may have been replaced beyond the 12th fret. Slight difference in laquer coloration on the fret board after the 12th fret. Please see all pictures for measurements. Shipes to the US only.

]]> https://fenderstratocasterneck.com/2026/07/26/fender-custom-shop-fat-maple-stratocaster-neck-2011/feed/ 0 https://fenderstratocasterneck.com/2026/07/18/usa-fender-custom-shop-70th-annie-54-strat-nos-neck-mn-maple/ https://fenderstratocasterneck.com/2026/07/18/usa-fender-custom-shop-70th-annie-54-strat-nos-neck-mn-maple/#comments Sat, 18 Jul 2026 19:11:45 +0000 https://fenderstratocasterneck.com/2026/07/18/usa-fender-custom-shop-70th-annie-54-strat-nos-neck-mn-maple/









Welcome to The Stratosphere. Helping the World Build a Better Guitar. USA Fender Custom Shop 70th Annie 54 Strat NOS NECK, MN Maple. Description: Official USA Fender Custom Shop Ltd. 70th Annie 54 Stratocaster NOS Neck- Quartersawn Maple Neck with Large “C” Back Shape- 7.25-9.5 Compound Radius- 21 Medium Vintage Frets- NOS Lacquer Finish- Genuine Fender. Country/Make: United States- American. Comments: Please note that Certificate and Specs are shown for reference only and are not included. Search tips for GEAR. The STRATosphere lists new, like new and used gear every day Monday through Friday. If you have specific requests, please don’t hesitate to message us and we will do our best to get the items you are looking for. We can’t always list everything we want in our titles to identify all of the items key features. Here are some tips and search terms to help search our listings for what you are looking for. We generally offer guitar/bass bodies in three body configurations if they are bolt-on neck guitars. (Body with Bridge & Tailpiece if applicable, strap buttons, neck plate with screws, back plate/trem covers if applicable). (Complete body with all electronics, wiring, hardware as it would come new without modifications unless specified otherwise). (Body with Strap Buttons Only). We generally offer two neck configurations. It may say Neck & Tuners, Neck + Tuners, Neck w/Tuners, etc. (will give you results with and without tuners). We offer guitars/basses that are set neck, neck through, or bolt on guitars as a husk to be the base for your custom build. Body & Neck, Body + Neck, etc. We offer Guitar/Bass electronics in several variations. This configuration is all the pickups that would have come with a specific guitar/bass, wiring, knobs, switches and input jack. Minimal Soldering would be required to get the electronics in your custom build and would generally consist of connecting a ground wire, input jack or toggle switch, after the electronics are in place on your guitar/bass. This is similar to the Pickups parts and knobs configuration but the pickups would be in place and attached to the original pickguard from the guitar. A Strat Loaded Pickguard would have everything attached to the pickguard so it would pop into your S style guitar, minor wiring and minor adjustments but all original solder joints in tact between pickups and pots. (This would be the original pickups from the specified guitar/bass with the full length lead wires, mounting screws, springs and mounting rings if applicable). Pots Switch (Potentiometers, Switch, Capacitor and all wiring with as many original solder joints as possible, from the guitar/bass specified). Other tips would be to keep any extra words out of the search. If you put in any word into the search that doesn’t match our title, it won’t show that we have it. We always specify the fingerboard wood without abbreviation maple, rosewood, ebony, etc. Stratocaster is always STRAT, Telecaster is always TELE. Common Series naming that may help you search: Classic Vibe 50s/60s/70s, American Vintage always has AV II and the full year 1963, 1977, etc. , Standard, Professional II, Professional Classic, Vintera, Sonic, Affinity, Road Worn, Ultra, Ultra Luxe, etc.. Artist series will have their last name in the title but don’t try to find everything by full name. Color is always mentioned in the title for the body unless it is only one option (Buddy Guy or SRV Loaded Body for instance). The color may be abbreviated so it may be best to try a couple different ways (surf, green, srf) or leave a color out and browse the options we do have for a specific series you are looking for. Please reach out if you have questions or don’t find what you are looking for. We have a great customer service team and we’re happy to assist! Do we offer discounts? Any sort of potential discount or deal would likely be dependent on the specific item(s) that you’re interested in, and we’d need to know the 12-digit item number of the item to investigate them further since there are a few different factors that may go into pricing, such as changes implemented by manufacturers, the age of a particular listing, and so on. In general, we set our own asking prices so there is often minimal wiggle room. We do always have discounted items that get released on the 1st of every month, and we generally have at least 1 end of the year sale. To offer its customers at great prices. Where do we get the products we sell? Unlike some of our competitors, theSTRATosphere typically offers parts from new A-Stock instruments that we received from manufacturers and we make the sum of their parts and components available for sale to customers, repair technicians, luthiers, and/or creative folks that want to assemble their own instruments, just as we have been for about 20 years now! Most of our items are considered “open box” items because they come from whole instruments thatve already been assembled, set up to play, and passed through the factorys quality control department, so it should have little to no play time on it, and they should be free from any defects too! Lastly, theSTRATosphere would NEVER sell counterfeit products where we claimed it was something it wasn’t, or from a guitar/bass that it wasn’t. We pride ourselves on transparency, we are owned and operated by musicians, and we have dedicated customer service staff that will work hard to get you the gear you are looking for. Is the part you are looking at compatible with your guitar/bass? For the best fit and function we can only recommend pairing items that are the same make and model. We would suggest consulting with a Luthier or a trusted guitar technician. In the past several years, most Fender and Squier parts from the same body shape Strat, Tele, Jazz, etc. Hole spacings, dimensions of neck pocket, etc. However, even if an item is a direct replacement to what you had, there will likely be necessary adjustments. Expect that a completed custom build will need final setup, wiring, and potential fret leveling/crowing/polishing. Yes, on most items we can. Some items cannot be combined due to packaging size and damage concerns: such as: a neck and body, a neck and pickguard, multiple hardshell cases or say a neck and gig bag. You can return the item for any reason within that time frame. Please pack well and return to. 112 Crawley Falls Rd. Please include your full name, order # and reason for return. RETURN – ADDITONAL INSTRUCTIONS. The item needs to be in transit back to us within 30 days from the day that you received it. Insuring the item is up to you. Please return the mistaken item and once it shows in transit back to us we will send your ordered item right away. We do our best to avoid this inconvenience and disappointment. RECEIVED DAMAGED (return label). INTERNATIONAL – DECLARATIONS LOWER VALUE REQUESTED. We’re sorry, we must declare the actual value of the item. We do not know how much it would be. Send this message after approving return. We’re sorry there is an issue with your order. The STRATosphere (Fret Factory, llc) is best known for offering the finest selection of guitar parts in the world. Quality has always been our top priority. Shop 24/7 to build a better guitar! We’ve been in business for over 20 years offering a unique blend of hard to find, proprietary and discounted guitar parts. Owned and operated in New Hampshire, with a passion to help with your custom builds or restoration needs. The STRATosphere is not a walk-in music store and we operate more like a production facility and warehouse. We do not have a selection to browse and we have to stay busy to get the items you want out the door and in your hands as fast as possible. The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. The STRATosphere is not affiliated with Fender Musical Instruments. Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P Bass®, J Bass®, Fender® and the distinctive headstock design of Fender guitars are registered trademarks of Fender® Musical Instruments. View more great items! STRAP BUTTONS & LOCKS. View Our Customer Feedback. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

]]> https://fenderstratocasterneck.com/2026/07/18/usa-fender-custom-shop-70th-annie-54-strat-nos-neck-mn-maple/feed/ 0 https://fenderstratocasterneck.com/2026/07/18/fender-usa-custom-shop-58-cr-strat-tcp-neck-tuners-strat-maple/ https://fenderstratocasterneck.com/2026/07/18/fender-usa-custom-shop-58-cr-strat-tcp-neck-tuners-strat-maple/#comments Sat, 18 Jul 2026 07:10:04 +0000 https://fenderstratocasterneck.com/2026/07/18/fender-usa-custom-shop-58-cr-strat-tcp-neck-tuners-strat-maple/









Description: Official American Fender Custom Shop 58 C/R Strat TCP Neck & Tuners- Quarter Sawn Maple Neck- 57 Strat Soft “V” Back-Shape- 25.5″ Scale Length- 9.5 to 12″ Compound Radius- 1.650 Nut Width- 21 Narrow Tall Frets- Flash-Coat Lacquer Finish- Genuine Fender. Condition: Mint (Time Capsule Finish). Country/Make: United States- American. Comments: You are looking at a beautiful mint American Fender Custom Shop Vintage Custom 58 C/R Strat TCP neck with tuners! This is a fantastic top shelf Fender reissue- top of the line American quality with Flash-Coat Lacquer Finish. It is straight w/ truss rod in perfect condition.

]]> https://fenderstratocasterneck.com/2026/07/18/fender-usa-custom-shop-58-cr-strat-tcp-neck-tuners-strat-maple/feed/ 0 https://fenderstratocasterneck.com/2026/06/13/fender-custom-shop-stratocaster-neck-2/ https://fenderstratocasterneck.com/2026/06/13/fender-custom-shop-stratocaster-neck-2/#comments Sat, 13 Jun 2026 17:23:00 +0000 https://fenderstratocasterneck.com/2026/06/13/fender-custom-shop-stratocaster-neck-2/





















Fender Custom Shop Stratocaster Neck limited edition. Best Stratocaster neck available on the market. One piece quartersawn maple neck with premium AAA rosewood fretboard. It’s been played and loved. Including repro neck plate and screws. Neck Material: Quartersawn maple. Fingerboard Material: AAA-grade selected Rosewood. Neck Profile’63 Strat C. Fingerboard Radius: 9.5. Frets: 21 frets, medium jumbos. Nut: Natural bone, classic width of 1.650 (41.9 mm). These are hard to come by. Feel free to ask any questions.

]]> https://fenderstratocasterneck.com/2026/06/13/fender-custom-shop-stratocaster-neck-2/feed/ 0 https://fenderstratocasterneck.com/2026/04/26/used-fender-usa-custom-shop-strat-neck-tuners-stratocaster-maple/ https://fenderstratocasterneck.com/2026/04/26/used-fender-usa-custom-shop-strat-neck-tuners-stratocaster-maple/#comments Sun, 26 Apr 2026 11:56:44 +0000 https://fenderstratocasterneck.com/2026/04/26/used-fender-usa-custom-shop-strat-neck-tuners-stratocaster-maple/








Welcome to The Stratosphere. Helping the World Build a Better Guitar. USED Fender USA Custom Shop Strat NECK + TUNERS Stratocaster Maple. Description: American Fender Custom Shop Stratocaster Neck & Tuners- Maple- Nitro Lacquer Finish- Genuine Fender. Country/Make: United States- American. Search tips for GEAR. The STRATosphere lists new, like new and used gear every day Monday through Friday. If you have specific requests, please don’t hesitate to message us and we will do our best to get the items you are looking for. We can’t always list everything we want in our titles to identify all of the items key features. Here are some tips and search terms to help search our listings for what you are looking for. We generally offer guitar/bass bodies in three body configurations if they are bolt-on neck guitars. (Body with Bridge & Tailpiece if applicable, strap buttons, neck plate with screws, back plate/trem covers if applicable). (Complete body with all electronics, wiring, hardware as it would come new without modifications unless specified otherwise). (Body with Strap Buttons Only). We generally offer two neck configurations. It may say Neck & Tuners, Neck + Tuners, Neck w/Tuners, etc. (will give you results with and without tuners). We offer guitars/basses that are set neck, neck through, or bolt on guitars as a husk to be the base for your custom build. Body & Neck, Body + Neck, etc. We offer Guitar/Bass electronics in several variations. This configuration is all the pickups that would have come with a specific guitar/bass, wiring, knobs, switches and input jack. Minimal Soldering would be required to get the electronics in your custom build and would generally consist of connecting a ground wire, input jack or toggle switch, after the electronics are in place on your guitar/bass. This is similar to the Pickups parts and knobs configuration but the pickups would be in place and attached to the original pickguard from the guitar. A Strat Loaded Pickguard would have everything attached to the pickguard so it would pop into your S style guitar, minor wiring and minor adjustments but all original solder joints in tact between pickups and pots. (This would be the original pickups from the specified guitar/bass with the full length lead wires, mounting screws, springs and mounting rings if applicable). Pots Switch (Potentiometers, Switch, Capacitor and all wiring with as many original solder joints as possible, from the guitar/bass specified). Other tips would be to keep any extra words out of the search. If you put in any word into the search that doesn’t match our title, it won’t show that we have it. We always specify the fingerboard wood without abbreviation maple, rosewood, ebony, etc. Stratocaster is always STRAT, Telecaster is always TELE. Common Series naming that may help you search: Classic Vibe 50s/60s/70s, American Vintage always has AV II and the full year 1963, 1977, etc. , Standard, Professional II, Professional Classic, Vintera, Sonic, Affinity, Road Worn, Ultra, Ultra Luxe, etc.. Artist series will have their last name in the title but don’t try to find everything by full name. Color is always mentioned in the title for the body unless it is only one option (Buddy Guy or SRV Loaded Body for instance). The color may be abbreviated so it may be best to try a couple different ways (surf, green, srf) or leave a color out and browse the options we do have for a specific series you are looking for. Please reach out if you have questions or don’t find what you are looking for. We have a great customer service team and we’re happy to assist! Do we offer discounts? Any sort of potential discount or deal would likely be dependent on the specific item(s) that you’re interested in, and we’d need to know the 12-digit item number of the item to investigate them further since there are a few different factors that may go into pricing, such as changes implemented by manufacturers, the age of a particular listing, and so on. In general, we set our own asking prices so there is often minimal wiggle room. We do always have discounted items that get released on the 1st of every month, and we generally have at least 1 end of the year sale. To offer its customers at great prices. Where do we get the products we sell? Unlike some of our competitors, theSTRATosphere typically offers parts from new A-Stock instruments that we received from manufacturers and we make the sum of their parts and components available for sale to customers, repair technicians, luthiers, and/or creative folks that want to assemble their own instruments, just as we have been for about 20 years now! Most of our items are considered “open box” items because they come from whole instruments thatve already been assembled, set up to play, and passed through the factorys quality control department, so it should have little to no play time on it, and they should be free from any defects too! Lastly, theSTRATosphere would NEVER sell counterfeit products where we claimed it was something it wasn’t, or from a guitar/bass that it wasn’t. We pride ourselves on transparency, we are owned and operated by musicians, and we have dedicated customer service staff that will work hard to get you the gear you are looking for. Is the part you are looking at compatible with your guitar/bass? For the best fit and function we can only recommend pairing items that are the same make and model. We would suggest consulting with a Luthier or a trusted guitar technician. In the past several years, most Fender and Squier parts from the same body shape Strat, Tele, Jazz, etc. Hole spacings, dimensions of neck pocket, etc. However, even if an item is a direct replacement to what you had, there will likely be necessary adjustments. Expect that a completed custom build will need final setup, wiring, and potential fret leveling/crowing/polishing. Yes, on most items we can. Some items cannot be combined due to packaging size and damage concerns: such as: a neck and body, a neck and pickguard, multiple hardshell cases or say a neck and gig bag. You can return the item for any reason within that time frame. Please pack well and return to. 112 Crawley Falls Rd. Please include your full name, order # and reason for return. RETURN – ADDITONAL INSTRUCTIONS. The item needs to be in transit back to us within 30 days from the day that you received it. Insuring the item is up to you. Please return the mistaken item and once it shows in transit back to us we will send your ordered item right away. We do our best to avoid this inconvenience and disappointment. RECEIVED DAMAGED (return label). INTERNATIONAL – DECLARATIONS LOWER VALUE REQUESTED. We’re sorry, we must declare the actual value of the item. We do not know how much it would be. Send this message after approving return. We’re sorry there is an issue with your order. The STRATosphere (Fret Factory, llc) is best known for offering the finest selection of guitar parts in the world. Quality has always been our top priority. Shop 24/7 to build a better guitar! We’ve been in business for over 20 years offering a unique blend of hard to find, proprietary and discounted guitar parts. Owned and operated in New Hampshire, with a passion to help with your custom builds or restoration needs. The STRATosphere is not a walk-in music store and we operate more like a production facility and warehouse. We do not have a selection to browse and we have to stay busy to get the items you want out the door and in your hands as fast as possible. The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. The STRATosphere is not affiliated with Fender Musical Instruments. Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P Bass®, J Bass®, Fender® and the distinctive headstock design of Fender guitars are registered trademarks of Fender® Musical Instruments. View more great items! STRAP BUTTONS & LOCKS. View Our Customer Feedback. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

]]> https://fenderstratocasterneck.com/2026/04/26/used-fender-usa-custom-shop-strat-neck-tuners-stratocaster-maple/feed/ 0