https://fenderstratocasterneck.com Sat, 25 Apr 2026 23:55:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2025/03/27/1980s-fender-japan-contemporary-stratocaster-guitar-neck/ https://fenderstratocasterneck.com/2025/03/27/1980s-fender-japan-contemporary-stratocaster-guitar-neck/#comments Thu, 27 Mar 2025 12:57:31 +0000 https://fenderstratocasterneck.com/2025/03/27/1980s-fender-japan-contemporary-stratocaster-guitar-neck/










Up for sale is a 1980s Fender Japan Contemporary Stratocaster guitar neck. Moderate use wear for the age. Cosmetically, the finish feels matted on the back – I believe it has aged over time. It may have been oversprayed on the back but I don’t think so. Frets themselves have all life left and no noticeable wear. Looks like it was stored for a long time and not much used. Truss rod turns fine; the neck is straight with about 1/2 turn left on the truss rod. It should work fine for any application.

]]> https://fenderstratocasterneck.com/2025/03/27/1980s-fender-japan-contemporary-stratocaster-guitar-neck/feed/ 0 https://fenderstratocasterneck.com/2025/02/16/1980-1981-1982-vintage-fender-bullet-standard-s-1-maple-rosewood-neck-1980s-usa/ https://fenderstratocasterneck.com/2025/02/16/1980-1981-1982-vintage-fender-bullet-standard-s-1-maple-rosewood-neck-1980s-usa/#comments Sun, 16 Feb 2025 10:48:48 +0000 https://fenderstratocasterneck.com/2025/02/16/1980-1981-1982-vintage-fender-bullet-standard-s-1-maple-rosewood-neck-1980s-usa/

























VERY GOOD working and cosmetic condition! Has had a repaired crack where the tuners are (see pics). Nut Width: 1.645 (41.8mm). 1st Fret Thickness: 0.866 (22mm). 12th Fret Thickness: 0.956 (24.3mm). Neck Profile: Chunky “U” Neck. Or Submit Your Best Offer!

]]> https://fenderstratocasterneck.com/2025/02/16/1980-1981-1982-vintage-fender-bullet-standard-s-1-maple-rosewood-neck-1980s-usa/feed/ 0 https://fenderstratocasterneck.com/2024/10/20/1987-vintage-fender-stratocaster-plus-maple-neck-usa-strat-1980s/ https://fenderstratocasterneck.com/2024/10/20/1987-vintage-fender-stratocaster-plus-maple-neck-usa-strat-1980s/#comments Sun, 20 Oct 2024 17:29:56 +0000 https://fenderstratocasterneck.com/2024/10/20/1987-vintage-fender-stratocaster-plus-maple-neck-usa-strat-1980s/























Up for sale is a 1987 Fender Stratocaster Plus Maple Neck! 1987 is the earliest year of the Strat Plus! Does not have the Original Wilkinson Nut, but I have it listed separately. KILLER Vintage cosmetic Condition. Original frets still have some life left in them. Nut Width: 1.712 (43.5mm). 1st Fret Thickness: 0.866 (22mm). 12th Fret Thickness: 0.905 (23mm).

]]> https://fenderstratocasterneck.com/2024/10/20/1987-vintage-fender-stratocaster-plus-maple-neck-usa-strat-1980s/feed/ 0 https://fenderstratocasterneck.com/2024/07/18/1980s-fender-squier-bullet-1-s3-h2-guitar-neck-stratocaster-hs-telecaster-heel/ https://fenderstratocasterneck.com/2024/07/18/1980s-fender-squier-bullet-1-s3-h2-guitar-neck-stratocaster-hs-telecaster-heel/#comments Thu, 18 Jul 2024 07:53:07 +0000 https://fenderstratocasterneck.com/2024/07/18/1980s-fender-squier-bullet-1-s3-h2-guitar-neck-stratocaster-hs-telecaster-heel/

























1980’s (probably 1985 give or take a year) Squier Bullet 1 Guitar Neck. Is correct for either S-3 or H-2 models. This is correct for either hardtail or tremolo bodies. This has a Stratocaster shaped headstock and a Telecaster shaped heel (correctly shaped heel for Telecaster neck pocket). Has cosmetic wear but not bad (please look closely at the numerous photos to get accurate cosmetic condition). Some guitar stand/play marks on back of neck. Some minor scratches and finish wear. A few tiny nicks. Some edge scuffing/nicking around sides and edges of headstock. Medium fret wear with some slight string grooving in upper frets. Good usable meat left on frets. Truss rod nut tightens and loosens. This is a great, VERY well made neck that is perfect for your restoration but is also excellent for building a custom. It will accommodate any standard scale Fender/Squier/Fender licensed Telecaster body (please see neck heel width below). Neck heel is approximately 2-3/16″ wide (2.219″ measured with calipers). Photos are a major part of the description. Please view the photos carefully for cosmetic condition as well as anything else I may not have described here. Please ask any questions you need to. This item is also for sale on another site. I reserve the right to end this listing at any time. Although very unlikely, it is possible that this item could sell on both sites before the second listing can be taken down. In that case, the earliest sale will prevail and the later sale will be cancelled.

]]> https://fenderstratocasterneck.com/2024/07/18/1980s-fender-squier-bullet-1-s3-h2-guitar-neck-stratocaster-hs-telecaster-heel/feed/ 0 https://fenderstratocasterneck.com/2023/10/30/vintage-1980s-fender-squier-stratocaster-neck-made-in-japan-very-good-used/ https://fenderstratocasterneck.com/2023/10/30/vintage-1980s-fender-squier-stratocaster-neck-made-in-japan-very-good-used/#comments Tue, 31 Oct 2023 02:14:29 +0000 https://fenderstratocasterneck.com/2023/10/30/vintage-1980s-fender-squier-stratocaster-neck-made-in-japan-very-good-used/






















NECK PROFILE IS THE STANDARD’E’ SERIAL NUMBERED MADE IN JAPAN STRATOCASTER NECK, GOOGLE IT IF YOU WOULD LIKE TO KNOW MORE. TRUSS ROD WORKS AS IT WAS MADE AND INTENDED TO WORK AND CAN BE ADJUSTED.

]]> https://fenderstratocasterneck.com/2023/10/30/vintage-1980s-fender-squier-stratocaster-neck-made-in-japan-very-good-used/feed/ 0 https://fenderstratocasterneck.com/2021/05/10/1980s-fender-62-stratocaster-us-vintage-reissue-neck-beautiful-figured-rosewood/ https://fenderstratocasterneck.com/2021/05/10/1980s-fender-62-stratocaster-us-vintage-reissue-neck-beautiful-figured-rosewood/#comments Mon, 10 May 2021 08:10:08 +0000 http://fenderstratocasterneck.com/2021/05/10/1980s-fender-62-stratocaster-us-vintage-reissue-neck-beautiful-figured-rosewood/













Fender 62 Stratocaster US Vintage Reissue Neck. No date penciled in on this one. My best guess would be early to mid 1980s. I suspect p enciling in a nice early date seems to be a common practice among 1980s reissue Strat necks. Many of the “paper tag” equipped necks were not dated so there’s ample opportunity to fill in your own date, spray a little clear lacquer over it, and presto! First year pencil date! There was no consistent place or type size or location for neck dates on early to mid 1980s Fender necks, if they were added at all. This neck was left exactly as it left the factory. The undated paper tag on the neck heel is a detail seen on Fender necks starting in 1982 and right through the late 1980s. Check out the gorgeous wood grain figuring on the rosewood fretboard. Frets and fretboard do not look as worn as the back of the neck would suggest. My guess is that finish was sanded off the back of the neck to get that worn feel. Last picture is wear at the 4th 5th and 6th frets. Very little “trenching” of the fingerboard is visible. Nut Width 1.66. Neck Thickness at 1st fret. Fender decal is a bit wrinkled, but intact. Early’62 Reissues did not have their decals finished over at the factory. “Contour Body” decal is there, but the print is worn off. The neck in the pictures is the actual neck you will receive. Call Paul at 401 722 5837 for questions about this item. I’m easy to contact and happy to answer all questions. CALL PAUL IN RHODE ISLAND. AT 401 722 5837. THAT’S 401 72BLUES. Providing my customers with excellent vintage and high end guitars, amps, tube stereos, mics, and anything fabulous & fun! The item “1980s Fender 62 Stratocaster US Vintage Reissue Neck Beautiful Figured Rosewood” is in sale since Wednesday, April 21, 2021. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Necks”. The seller is “pmblues” and is located in Pawtucket, Rhode Island. This item can be shipped to United States.

• To Fit: Electric Guitar
• Material: Maple
• Product Type: Neck
• Type: Neck
• Brand: Fender

]]> https://fenderstratocasterneck.com/2021/05/10/1980s-fender-62-stratocaster-us-vintage-reissue-neck-beautiful-figured-rosewood/feed/ 0