https://fenderstratocasterneck.com Thu, 22 Oct 2026 13:29:42 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/10/22/fender-av-ii-american-vintage-1973-strat-neck-tuners-73-stratocaster-rosewood/ https://fenderstratocasterneck.com/2026/10/22/fender-av-ii-american-vintage-1973-strat-neck-tuners-73-stratocaster-rosewood/#comments Thu, 22 Oct 2026 13:29:42 +0000 https://fenderstratocasterneck.com/2026/10/22/fender-av-ii-american-vintage-1973-strat-neck-tuners-73-stratocaster-rosewood/







Welcome to The Stratosphere. Helping the World Build a Better Guitar. Fender AV II American Vintage 1973 Strat NECK & TUNERS 73 Stratocaster Rosewood. Description: Official Fender AV II American Vintage 1973 Reissue Stratocaster Neck & Tuners- Maple w/ Rosewood Fingerboard- 1973 “C” Shape- 7.25″ Radius- 21 Vintage Tall Frets- 1.650″ Width at Nut- Genuine Fender. Country/Make: United States- American. Search tips for GEAR. The STRATosphere lists new, like new and used gear every day Monday through Friday. If you have specific requests, please don’t hesitate to message us and we will do our best to get the items you are looking for. We can’t always list everything we want in our titles to identify all of the items key features. Here are some tips and search terms to help search our listings for what you are looking for. We generally offer guitar/bass bodies in three body configurations if they are bolt-on neck guitars. Body hardware (Body with Bridge & Tailpiece if applicable, strap buttons, neck plate with screws, back plate/trem covers if applicable). Loaded Body (Complete body with all electronics, wiring, hardware as it would come new without modifications unless specified otherwise). Body (Body with Strap Buttons Only). We generally offer two neck configurations. Neck Tuners Tuners On. It may say Neck & Tuners, Neck + Tuners, Neck w/Tuners, etc. Neck (will give you results with and without tuners). We offer guitars/basses that are set neck, neck through, or bolt on guitars as a husk to be the base for your custom build. Body & Neck, Body + Neck, etc. We offer Guitar/Bass electronics in several variations. Minimal Soldering would be required to get the electronics in your custom build and would generally consist of connecting a ground wire, input jack or toggle switch, after the electronics are in place on your guitar/bass. Loaded Pickguard This is similar to the Pickups parts and knobs configuration but the pickups would be in place and attached to the original pickguard from the guitar. A Strat Loaded Pickguard would have everything attached to the pickguard so it would pop into your S style guitar, minor wiring and minor adjustments but all original solder joints in tact between pickups and pots. Pots Switch (Potentiometers, Switch, Capacitor and all wiring with as many original solder joints as possible, from the guitar/bass specified). Other tips would be to keep any extra words out of the search. If you put in any word into the search that doesn’t match our title, it won’t show that we have it. We always specify the fingerboard wood without abbreviation maple, rosewood, ebony, etc. Stratocaster is always STRAT, Telecaster is always TELE. Common Series naming that may help you search: Classic Vibe 50s/60s/70s, American Vintage always has AV II and the full year 1963, 1977, etc. , Standard, Professional II, Professional Classic, Vintera, Sonic, Affinity, Road Worn, Ultra, Ultra Luxe, etc.. Artist series will have their last name in the title but don’t try to find everything by full name. Color is always mentioned in the title for the body unless it is only one option (Buddy Guy or SRV Loaded Body for instance). The color may be abbreviated so it may be best to try a couple different ways (surf, green, srf) or leave a color out and browse the options we do have for a specific series you are looking for. Please reach out if you have questions or don’t find what you are looking for. We have a great customer service team and we’re happy to assist! Do we offer discounts? Any sort of potential discount or deal would likely be dependent on the specific item(s) that you’re interested in, and we’d need to know the 12-digit item number of the item to investigate them further since there are a few different factors that may go into pricing, such as changes implemented by manufacturers, the age of a particular listing, and so on. In general, we set our own asking prices so there is often minimal wiggle room. We do always have discounted items that get released on the 1st of every month, and we generally have at least 1 end of the year sale. To offer its customers at great prices. Where do we get the products we sell? Unlike some of our competitors, theSTRATosphere typically offers parts from new A-Stock instruments that we received from manufacturers and we make the sum of their parts and components available for sale to customers, repair technicians, luthiers, and/or creative folks that want to assemble their own instruments, just as we have been for about 20 years now! Most of our items are considered “open box” items because they come from whole instruments that have already been assembled from the factory, set up to play, and passed through the factorys quality control department, so it should have little to no play time on it, and they should be free from any defects too! If we sell items that are Used, demo or B stock, they will be clearly marked as such in the titles of our listings. Lastly, theSTRATosphere would NEVER sell counterfeit products where we claimed it to be something it was not, or from a guitar/bass that it wasn’t. We pride ourselves on transparency and we have dedicated customer service staff that will work hard to get you the gear you are looking for. Is the part you are looking at compatible with your guitar/bass? For the best fit and function, we can only recommend pairing items that are the same make and model. We would suggest consulting with a Luthier or a trusted guitar technician. In the past several years, most Fender and Squier parts from the same body shape Strat, Tele, Jazz, etc. Hole spacings, dimensions of neck pocket, etc. However, even if an item is a direct replacement to what you had, there will likely be necessary adjustments. Expect that a completed custom build will need final setup, wiring, and potential fret leveling/crowing/polishing. Yes, on most items we can. Please commit to purchasing the items, request a total and we will invoice you accordingly. Some items cannot be combined due to packaging size and damage concerns: such as a neck and body, a neck and pickguard, multiple hardshell cases or say a neck and gig bag. You can return the item for any reason within that time frame. Please pack well and return to. 112 Crawley Falls Rd. Please include your full name, order # and reason for return. RETURN – ADDITONAL INSTRUCTIONS. The item needs to be in transit back to us within 30 days from the day that you received it. Insuring the item is up to you. Please return the mistaken item and once it shows in transit back to us we will send your ordered item right away. We do our best to avoid this inconvenience and disappointment. RECEIVED DAMAGED (return label). INTERNATIONAL – DECLARATIONS LOWER VALUE REQUESTED. We’re sorry, we must declare the actual value of the item. We do not know how much it would be. Send this message after approving return. We’re sorry there is an issue with your order. The STRATosphere (Fret Factory, llc) is best known for offering the finest selection of guitar parts in the world. Quality has always been our top priority. Shop 24/7 to build a better guitar! We’ve been in business for over 20 years offering a unique blend of hard to find, proprietary and discounted guitar parts. Owned and operated in New Hampshire, with a passion to help with your custom builds or restoration needs. The STRATosphere is not a walk-in music store and we operate more like a production facility and warehouse. We do not have a selection to browse and we have to stay busy to get the items you want out the door and in your hands as fast as possible. The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. The STRATosphere is not affiliated with Fender Musical Instruments. Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P Bass®, J Bass®, Fender® and the distinctive headstock design of Fender guitars are registered trademarks of Fender® Musical Instruments. View more great items. Fender Squier Sonic Bronco Bass NECK & TUNERS 9.5″ Radius “C Laurel. Fender Squier 60s Classic Vibe Jazz J Bass NECK & TUNERS, Laurel. Fender Player II Jaguar Series NECK & TUNERS 9.5″ “C Shape, Guitar Rosewood. STRAP BUTTONS & LOCKS. View Our Customer Feedback. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

]]> https://fenderstratocasterneck.com/2026/10/22/fender-av-ii-american-vintage-1973-strat-neck-tuners-73-stratocaster-rosewood/feed/ 0 https://fenderstratocasterneck.com/2026/10/21/fender-statocaster-maple-neck-mo20409688-serial-mx10272964/ https://fenderstratocasterneck.com/2026/10/21/fender-statocaster-maple-neck-mo20409688-serial-mx10272964/#comments Thu, 22 Oct 2026 01:27:59 +0000 https://fenderstratocasterneck.com/2026/10/21/fender-statocaster-maple-neck-mo20409688-serial-mx10272964/









Never used – see last pic for small chip. Will not be very visible once installed. 100% authentic Fender neck. Comes from a smoke-free and pet-free home. Please feel free to ask questions.

]]> https://fenderstratocasterneck.com/2026/10/21/fender-statocaster-maple-neck-mo20409688-serial-mx10272964/feed/ 0 https://fenderstratocasterneck.com/2026/10/21/fender-american-strat-rosewood-channel-bound-neck-usa-electric-guitar/ https://fenderstratocasterneck.com/2026/10/21/fender-american-strat-rosewood-channel-bound-neck-usa-electric-guitar/#comments Wed, 21 Oct 2026 13:26:47 +0000 https://fenderstratocasterneck.com/2026/10/21/fender-american-strat-rosewood-channel-bound-neck-usa-electric-guitar/






















Fender American Channel Bound Stratocaster Neck. Modern “C” Shape Profile. 9.5″-14″ compound-radius. Satin Back Finish / Gloss Headstock Face. 21 Medium Jumbo Frets. 2 5.5 Scale Length. 1.685 Width at Nut. The frets are not worn and it’s an excellent playing neck. The neck is strait and the truss rod turns and adjusts properly. Awesome authentic Fender neck!

]]> https://fenderstratocasterneck.com/2026/10/21/fender-american-strat-rosewood-channel-bound-neck-usa-electric-guitar/feed/ 0 https://fenderstratocasterneck.com/2026/10/20/fender-vintera-mod70s-stratocaster-neck-maple-3/ https://fenderstratocasterneck.com/2026/10/20/fender-vintera-mod70s-stratocaster-neck-maple-3/#comments Wed, 21 Oct 2026 01:25:42 +0000 https://fenderstratocasterneck.com/2026/10/20/fender-vintera-mod70s-stratocaster-neck-maple-3/




There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. This genuine Fender Stratocaster neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring an “early 70’s C” neck profile and 9.5-radius maple fingerboard with 21 medium jumbo frets, for modern playing feel. Although this neck features a 3-bolt design typical of’70s Strats, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies. The synthetic bone nut is pre-slotted with “pilot” grooves for accurate spacing when filing the final string slots. Fender Vintera Mod’70s Stratocaster Neck Maple. The perfect way to give your Strat® authentic Fender feel, this replacement neck even sports the CBS era logo and a Bullet truss rod on the larger headstock. Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender. Com. Roasted maple neck “Early 70’s C”-shaped profile; 9.5-radius maple fingerboard 21 medium jumbo frets; pre-slotted synthetic bone nut Gloss urethane finish on fingerboard and headstock face; satin finish on back of neck Bullet-style truss rod adjustment. For example, if your order is placed AND paid for at 1 p. Store Policies If you’re not satisfied, neither are we. It’s that simple. Be in brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings, or scrapes on the instrument or collateral materials.

]]> https://fenderstratocasterneck.com/2026/10/20/fender-vintera-mod70s-stratocaster-neck-maple-3/feed/ 0 https://fenderstratocasterneck.com/2026/10/20/fender-squier-classic-vibe-70s-strat-neck-stratocaster-guitar-lrl-nk-laurel-3/ https://fenderstratocasterneck.com/2026/10/20/fender-squier-classic-vibe-70s-strat-neck-stratocaster-guitar-lrl-nk-laurel-3/#comments Tue, 20 Oct 2026 13:23:43 +0000 https://fenderstratocasterneck.com/2026/10/20/fender-squier-classic-vibe-70s-strat-neck-stratocaster-guitar-lrl-nk-laurel-3/







Welcome to The Stratosphere. Helping the World Build a Better Guitar. Fender Squier Classic Vibe 70s Strat NECK Stratocaster Guitar LRL Nk, Laurel. Description: Official Fender Squier Classic Vibe 70s Stratocaster Neck- Tinted Maple w/ Indian Laurel Fingerboard- “C” Shape- 9.5″ Radius (241 mm)- 21 Narrow Tall Frets- 25.5″ (648 mm) Scale Length- 1.650 (42 mm) Width at Nut- Genuine Fender. Search tips for GEAR. The STRATosphere lists new, like new and used gear every day Monday through Friday. If you have specific requests, please don’t hesitate to message us and we will do our best to get the items you are looking for. We can’t always list everything we want in our titles to identify all of the items key features. Here are some tips and search terms to help search our listings for what you are looking for. We generally offer guitar/bass bodies in three body configurations if they are bolt-on neck guitars. Body hardware (Body with Bridge & Tailpiece if applicable, strap buttons, neck plate with screws, back plate/trem covers if applicable). Loaded Body (Complete body with all electronics, wiring, hardware as it would come new without modifications unless specified otherwise). Body (Body with Strap Buttons Only). We generally offer two neck configurations. Neck Tuners Tuners On. It may say Neck & Tuners, Neck + Tuners, Neck w/Tuners, etc. Neck (will give you results with and without tuners). We offer guitars/basses that are set neck, neck through, or bolt on guitars as a husk to be the base for your custom build. Body & Neck, Body + Neck, etc. We offer Guitar/Bass electronics in several variations. Minimal Soldering would be required to get the electronics in your custom build and would generally consist of connecting a ground wire, input jack or toggle switch, after the electronics are in place on your guitar/bass. Loaded Pickguard This is similar to the Pickups parts and knobs configuration but the pickups would be in place and attached to the original pickguard from the guitar. A Strat Loaded Pickguard would have everything attached to the pickguard so it would pop into your S style guitar, minor wiring and minor adjustments but all original solder joints in tact between pickups and pots. Pots Switch (Potentiometers, Switch, Capacitor and all wiring with as many original solder joints as possible, from the guitar/bass specified). Other tips would be to keep any extra words out of the search. If you put in any word into the search that doesn’t match our title, it won’t show that we have it. We always specify the fingerboard wood without abbreviation maple, rosewood, ebony, etc. Stratocaster is always STRAT, Telecaster is always TELE. Common Series naming that may help you search: Classic Vibe 50s/60s/70s, American Vintage always has AV II and the full year 1963, 1977, etc. , Standard, Professional II, Professional Classic, Vintera, Sonic, Affinity, Road Worn, Ultra, Ultra Luxe, etc.. Artist series will have their last name in the title but don’t try to find everything by full name. Color is always mentioned in the title for the body unless it is only one option (Buddy Guy or SRV Loaded Body for instance). The color may be abbreviated so it may be best to try a couple different ways (surf, green, srf) or leave a color out and browse the options we do have for a specific series you are looking for. Please reach out if you have questions or don’t find what you are looking for. We have a great customer service team and we’re happy to assist! Do we offer discounts? Any sort of potential discount or deal would likely be dependent on the specific item(s) that you’re interested in, and we’d need to know the 12-digit item number of the item to investigate them further since there are a few different factors that may go into pricing, such as changes implemented by manufacturers, the age of a particular listing, and so on. In general, we set our own asking prices so there is often minimal wiggle room. We do always have discounted items that get released on the 1st of every month, and we generally have at least 1 end of the year sale. To offer its customers at great prices. Where do we get the products we sell? Unlike some of our competitors, theSTRATosphere typically offers parts from new A-Stock instruments that we received from manufacturers and we make the sum of their parts and components available for sale to customers, repair technicians, luthiers, and/or creative folks that want to assemble their own instruments, just as we have been for about 20 years now! Most of our items are considered “open box” items because they come from whole instruments that have already been assembled from the factory, set up to play, and passed through the factorys quality control department, so it should have little to no play time on it, and they should be free from any defects too! If we sell items that are Used, demo or B stock, they will be clearly marked as such in the titles of our listings. Lastly, theSTRATosphere would NEVER sell counterfeit products where we claimed it to be something it was not, or from a guitar/bass that it wasn’t. We pride ourselves on transparency and we have dedicated customer service staff that will work hard to get you the gear you are looking for. Is the part you are looking at compatible with your guitar/bass? For the best fit and function, we can only recommend pairing items that are the same make and model. We would suggest consulting with a Luthier or a trusted guitar technician. In the past several years, most Fender and Squier parts from the same body shape Strat, Tele, Jazz, etc. Hole spacings, dimensions of neck pocket, etc. However, even if an item is a direct replacement to what you had, there will likely be necessary adjustments. Expect that a completed custom build will need final setup, wiring, and potential fret leveling/crowing/polishing. Yes, on most items we can. Please commit to purchasing the items, request a total and we will invoice you accordingly. Some items cannot be combined due to packaging size and damage concerns: such as a neck and body, a neck and pickguard, multiple hardshell cases or say a neck and gig bag. You can return the item for any reason within that time frame. Please pack well and return to. 112 Crawley Falls Rd. Please include your full name, order # and reason for return. RETURN – ADDITONAL INSTRUCTIONS. The item needs to be in transit back to us within 30 days from the day that you received it. Insuring the item is up to you. Please return the mistaken item and once it shows in transit back to us we will send your ordered item right away. We do our best to avoid this inconvenience and disappointment. RECEIVED DAMAGED (return label). INTERNATIONAL – DECLARATIONS LOWER VALUE REQUESTED. We’re sorry, we must declare the actual value of the item. We do not know how much it would be. Send this message after approving return. We’re sorry there is an issue with your order. The STRATosphere (Fret Factory, llc) is best known for offering the finest selection of guitar parts in the world. Quality has always been our top priority. Shop 24/7 to build a better guitar! We’ve been in business for over 20 years offering a unique blend of hard to find, proprietary and discounted guitar parts. Owned and operated in New Hampshire, with a passion to help with your custom builds or restoration needs. The STRATosphere is not a walk-in music store and we operate more like a production facility and warehouse. We do not have a selection to browse and we have to stay busy to get the items you want out the door and in your hands as fast as possible. The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. The STRATosphere is not affiliated with Fender Musical Instruments. Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P Bass®, J Bass®, Fender® and the distinctive headstock design of Fender guitars are registered trademarks of Fender® Musical Instruments. View more great items. Fender American Ultra II Stratocaster Strat, NECK w/ LOCKING TUNERS “D” Maple. Fender American Professional II Telecaster Tele Deluxe, NECK + TUNERS, Rosewood. Fender Squier Affinity Series Telecaster, NECK w/ TUNERS for Tele Laurel. Fender Squier Classic Vibe 60s Custom Tele NECK, Telecaster Guitar Laurel. STRAP BUTTONS & LOCKS. View Our Customer Feedback. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

]]> https://fenderstratocasterneck.com/2026/10/20/fender-squier-classic-vibe-70s-strat-neck-stratocaster-guitar-lrl-nk-laurel-3/feed/ 0 https://fenderstratocasterneck.com/2026/10/19/fender-classic-series50s-stratocaster-neck-lacquer-finish-soft-v-shape-maple-4/ https://fenderstratocasterneck.com/2026/10/19/fender-classic-series50s-stratocaster-neck-lacquer-finish-soft-v-shape-maple-4/#comments Tue, 20 Oct 2026 01:22:41 +0000 https://fenderstratocasterneck.com/2026/10/19/fender-classic-series50s-stratocaster-neck-lacquer-finish-soft-v-shape-maple-4/




Classic Series’50s Stratocaster Neck with Lacquer Finish, Soft “V” Shape – Maple FingerboardCrafted at the Ensenada, Mexico manufacturing facility, this genuine vintage-style Fender Stratocaster guitar neck features a comfortable “Soft V” profile and 7.25 in. Radius maple fingerboard with 21 vintage-style frets. The synthetic bone nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing, and a lacquer finish offers a vintage feel. This replacement neck is the perfect way to give your Strat an authentically’50s feel. Fender Classic Series’50s Stratocaster Neck Lacquer Finish Soft V Shape Maple. Classic Series’50s Stratocaster Neck with Lacquer Finish, Soft “V” Shape – Maple Fingerboard Crafted at the Ensenada, Mexico manufacturing facility, this genuine vintage-style Fender Stratocaster guitar neck features a comfortable “Soft V” profile and 7.25 in. For example, if your order is placed AND paid for at 1 p. Store Policies If you’re not satisfied, neither are we. It’s that simple. Be in brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings, or scrapes on the instrument or collateral materials.

]]> https://fenderstratocasterneck.com/2026/10/19/fender-classic-series50s-stratocaster-neck-lacquer-finish-soft-v-shape-maple-4/feed/ 0 https://fenderstratocasterneck.com/2026/10/19/strat-guitar-body-3pcs-north-american-alder-paisley-redsilver-2-1kg/ https://fenderstratocasterneck.com/2026/10/19/strat-guitar-body-3pcs-north-american-alder-paisley-redsilver-2-1kg/#comments Mon, 19 Oct 2026 13:20:45 +0000 https://fenderstratocasterneck.com/2026/10/19/strat-guitar-body-3pcs-north-american-alder-paisley-redsilver-2-1kg/

















Deffective Wood Picture Show! Body Thickness: 1-3/4 (44.45mm). 2-7/32 (56mm) Width(For USA Specs Strat Neck). 3(76.2mm) Length. 5/8(15.88mm) Depth. Shielding Paint In The Control Cavity. Top routed for SSS configuration. Control Cavity: 60’s Fender Top Guard Style. Jack: Vintage Top Mount. Contours: 60’s Style. Item Pictured Is Actual Item That Will Be Received. Please check whether the neck width size of your neck. Is the same size as our listed before purchasing. There are two remarks at the bridge position. The spacing size is. Buyers are able to drill holes at their preferences size. All FD standard strat specific bridge fit for the guitar body. Strengthen and thickened foam case, with 100% protection. If you are dissatisfied with you item upon receipt. A return may be requested at buyers expense. Unless item was inaccurately described. We’ll do all we can to assist.

]]> https://fenderstratocasterneck.com/2026/10/19/strat-guitar-body-3pcs-north-american-alder-paisley-redsilver-2-1kg/feed/ 0 https://fenderstratocasterneck.com/2026/10/18/fender-vintera70s-stratocaster-with-maple-fretboard-mocha/ https://fenderstratocasterneck.com/2026/10/18/fender-vintera70s-stratocaster-with-maple-fretboard-mocha/#comments Mon, 19 Oct 2026 01:19:46 +0000 https://fenderstratocasterneck.com/2026/10/18/fender-vintera70s-stratocaster-with-maple-fretboard-mocha/













Fender Vintera’70s Stratocaster with Maple Fretboard – Mocha. Excellent condition Vintera 70’s Strat. No dents or scratches aside from normal marks on the pickguard. Has a nice low action set up and plays great. Body Shape: Double Cutaway. Body Type: Solid Body. Scale Length: 25.5 inches. Fingerboard Radius: 7.25 inches. Fret Size: Vintage Style. Number of Frets: 21. Nut Width: 1.65 inches (41.91 mm). Controls: Master Volume and Tone. Bridge Type: Fixed-Mount Base with Tremolo. Bridge Design: Vintage-Style Six-Point Synchronized Tremolo. Tuning Machines: Vintage F-Stamped.

]]> https://fenderstratocasterneck.com/2026/10/18/fender-vintera70s-stratocaster-with-maple-fretboard-mocha/feed/ 0 https://fenderstratocasterneck.com/2026/10/18/fender-av-ii-american-vintage-1973-strat-neck-tuners-73-stratocaster-maple/ https://fenderstratocasterneck.com/2026/10/18/fender-av-ii-american-vintage-1973-strat-neck-tuners-73-stratocaster-maple/#comments Sun, 18 Oct 2026 13:17:44 +0000 https://fenderstratocasterneck.com/2026/10/18/fender-av-ii-american-vintage-1973-strat-neck-tuners-73-stratocaster-maple/







Welcome to The Stratosphere. Helping the World Build a Better Guitar. Fender AV II American Vintage 1973 Strat NECK & TUNERS 73 Stratocaster Maple. Description: Official Fender AV II American Vintage 1973 Reissue Stratocaster Neck & Tuners- Maple- 1973 “C” Shape- 7.25″ Radius- 21 Vintage Tall Frets- 1.650″ Width at Nut- Genuine Fender. Country/Make: United States- American. Search tips for GEAR. The STRATosphere lists new, like new and used gear every day Monday through Friday. If you have specific requests, please don’t hesitate to message us and we will do our best to get the items you are looking for. We can’t always list everything we want in our titles to identify all of the items key features. Here are some tips and search terms to help search our listings for what you are looking for. We generally offer guitar/bass bodies in three body configurations if they are bolt-on neck guitars. Body hardware (Body with Bridge & Tailpiece if applicable, strap buttons, neck plate with screws, back plate/trem covers if applicable). Loaded Body (Complete body with all electronics, wiring, hardware as it would come new without modifications unless specified otherwise). Body (Body with Strap Buttons Only). We generally offer two neck configurations. Neck Tuners Tuners On. It may say Neck & Tuners, Neck + Tuners, Neck w/Tuners, etc. Neck (will give you results with and without tuners). We offer guitars/basses that are set neck, neck through, or bolt on guitars as a husk to be the base for your custom build. Body & Neck, Body + Neck, etc. We offer Guitar/Bass electronics in several variations. Minimal Soldering would be required to get the electronics in your custom build and would generally consist of connecting a ground wire, input jack or toggle switch, after the electronics are in place on your guitar/bass. Loaded Pickguard This is similar to the Pickups parts and knobs configuration but the pickups would be in place and attached to the original pickguard from the guitar. A Strat Loaded Pickguard would have everything attached to the pickguard so it would pop into your S style guitar, minor wiring and minor adjustments but all original solder joints in tact between pickups and pots. Pots Switch (Potentiometers, Switch, Capacitor and all wiring with as many original solder joints as possible, from the guitar/bass specified). Other tips would be to keep any extra words out of the search. If you put in any word into the search that doesn’t match our title, it won’t show that we have it. We always specify the fingerboard wood without abbreviation maple, rosewood, ebony, etc. Stratocaster is always STRAT, Telecaster is always TELE. Common Series naming that may help you search: Classic Vibe 50s/60s/70s, American Vintage always has AV II and the full year 1963, 1977, etc. , Standard, Professional II, Professional Classic, Vintera, Sonic, Affinity, Road Worn, Ultra, Ultra Luxe, etc.. Artist series will have their last name in the title but don’t try to find everything by full name. Color is always mentioned in the title for the body unless it is only one option (Buddy Guy or SRV Loaded Body for instance). The color may be abbreviated so it may be best to try a couple different ways (surf, green, srf) or leave a color out and browse the options we do have for a specific series you are looking for. Please reach out if you have questions or don’t find what you are looking for. We have a great customer service team and we’re happy to assist! Do we offer discounts? Any sort of potential discount or deal would likely be dependent on the specific item(s) that you’re interested in, and we’d need to know the 12-digit item number of the item to investigate them further since there are a few different factors that may go into pricing, such as changes implemented by manufacturers, the age of a particular listing, and so on. In general, we set our own asking prices so there is often minimal wiggle room. We do always have discounted items that get released on the 1st of every month, and we generally have at least 1 end of the year sale. To offer its customers at great prices. Where do we get the products we sell? Unlike some of our competitors, theSTRATosphere typically offers parts from new A-Stock instruments that we received from manufacturers and we make the sum of their parts and components available for sale to customers, repair technicians, luthiers, and/or creative folks that want to assemble their own instruments, just as we have been for about 20 years now! Most of our items are considered “open box” items because they come from whole instruments that have already been assembled from the factory, set up to play, and passed through the factorys quality control department, so it should have little to no play time on it, and they should be free from any defects too! If we sell items that are Used, demo or B stock, they will be clearly marked as such in the titles of our listings. Lastly, theSTRATosphere would NEVER sell counterfeit products where we claimed it to be something it was not, or from a guitar/bass that it wasn’t. We pride ourselves on transparency and we have dedicated customer service staff that will work hard to get you the gear you are looking for. Is the part you are looking at compatible with your guitar/bass? For the best fit and function, we can only recommend pairing items that are the same make and model. We would suggest consulting with a Luthier or a trusted guitar technician. In the past several years, most Fender and Squier parts from the same body shape Strat, Tele, Jazz, etc. Hole spacings, dimensions of neck pocket, etc. However, even if an item is a direct replacement to what you had, there will likely be necessary adjustments. Expect that a completed custom build will need final setup, wiring, and potential fret leveling/crowing/polishing. Yes, on most items we can. Please commit to purchasing the items, request a total and we will invoice you accordingly. Some items cannot be combined due to packaging size and damage concerns: such as a neck and body, a neck and pickguard, multiple hardshell cases or say a neck and gig bag. You can return the item for any reason within that time frame. Please pack well and return to. 112 Crawley Falls Rd. Please include your full name, order # and reason for return. RETURN – ADDITONAL INSTRUCTIONS. The item needs to be in transit back to us within 30 days from the day that you received it. Insuring the item is up to you. Please return the mistaken item and once it shows in transit back to us we will send your ordered item right away. We do our best to avoid this inconvenience and disappointment. RECEIVED DAMAGED (return label). INTERNATIONAL – DECLARATIONS LOWER VALUE REQUESTED. We’re sorry, we must declare the actual value of the item. We do not know how much it would be. Send this message after approving return. We’re sorry there is an issue with your order. The STRATosphere (Fret Factory, llc) is best known for offering the finest selection of guitar parts in the world. Quality has always been our top priority. Shop 24/7 to build a better guitar! We’ve been in business for over 20 years offering a unique blend of hard to find, proprietary and discounted guitar parts. Owned and operated in New Hampshire, with a passion to help with your custom builds or restoration needs. The STRATosphere is not a walk-in music store and we operate more like a production facility and warehouse. We do not have a selection to browse and we have to stay busy to get the items you want out the door and in your hands as fast as possible. The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. The STRATosphere is not affiliated with Fender Musical Instruments. Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P Bass®, J Bass®, Fender® and the distinctive headstock design of Fender guitars are registered trademarks of Fender® Musical Instruments. View more great items. Fender Squier Classic Vibe 70s Jazz J Bass NECK Guitar Maple Block. Fender Player II Series Stratocaster Series, Strat, NECK &nd TUNERS, Maple. Fender Squier Classic Vibe 60s Jazzmaster NECK C Shaped 1960s, LRL, Laurel. Fender Squier Classic Vibe 50s Telecaster NECK &nd TUNERS, Tele Tinted Maple. STRAP BUTTONS & LOCKS. View Our Customer Feedback. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

]]> https://fenderstratocasterneck.com/2026/10/18/fender-av-ii-american-vintage-1973-strat-neck-tuners-73-stratocaster-maple/feed/ 0 https://fenderstratocasterneck.com/2026/10/17/warmoth-licensed-by-fender-maple-neck-electric-guitar-stratocaster-project/ https://fenderstratocasterneck.com/2026/10/17/warmoth-licensed-by-fender-maple-neck-electric-guitar-stratocaster-project/#comments Sun, 18 Oct 2026 01:16:49 +0000 https://fenderstratocasterneck.com/2026/10/17/warmoth-licensed-by-fender-maple-neck-electric-guitar-stratocaster-project/

























Warmoth Licensed by Fender Maple Neck Electric Guitar. Nice Solid Maple Neck. (see pics) for detail. For your Project. Message for more info or pics. See my other items.

]]> https://fenderstratocasterneck.com/2026/10/17/warmoth-licensed-by-fender-maple-neck-electric-guitar-stratocaster-project/feed/ 0