https://fenderstratocasterneck.com Sun, 19 Apr 2026 11:42:49 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2024/02/26/new-wd-licensed-by-fender-21-fret-vintage-neck-for-stratocaster-c-maple-snvm/ https://fenderstratocasterneck.com/2024/02/26/new-wd-licensed-by-fender-21-fret-vintage-neck-for-stratocaster-c-maple-snvm/#comments Tue, 27 Feb 2024 04:21:36 +0000 https://fenderstratocasterneck.com/2024/02/26/new-wd-licensed-by-fender-21-fret-vintage-neck-for-stratocaster-c-maple-snvm/


WD® Licensed By Fender® Replacement 21 Fret Vintage Neck For Stratocaster® Modern C- Maple Replacement Vintage Stratocaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 inch radius, 1 5/8 inch nut width, a comfortable’C’ shaped profile and a honey tinted gloss finish. Heel adjust truss rod location and 8.8 mm peg holes drilled for a vintage Kluson tuning machine as nature intended. All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. WD does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that we sell WD does not hand-select necks based on appearance or weight. WD neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required. WD recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop.

]]> https://fenderstratocasterneck.com/2024/02/26/new-wd-licensed-by-fender-21-fret-vintage-neck-for-stratocaster-c-maple-snvm/feed/ 0 https://fenderstratocasterneck.com/2024/02/03/new-new-licensed-by-fender-smtf-crf-replacement-neck-for-stratocaster-roasted/ https://fenderstratocasterneck.com/2024/02/03/new-new-licensed-by-fender-smtf-crf-replacement-neck-for-stratocaster-roasted/#comments Sat, 03 Feb 2024 14:51:46 +0000 https://fenderstratocasterneck.com/2024/02/03/new-new-licensed-by-fender-smtf-crf-replacement-neck-for-stratocaster-roasted/











The SMTF-CRF replacement neck for Stratocaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan. Made of roasted flame maple tempered to 7% moisture content, this neck offers stunning looks and increased stability. With a modern 10 fretboard radius and 21 vintage-tall frets, our SMTF-CRF offers a great combination of elegant aesthetics and modern playability. Frets: 21 tall frets. Wood: 1-piece roasted flame maple tempered to 7% moisture content. Finish: Thin semi-gloss polyurethane finish. Inlays: Black fretboard and side marker dots. Tuning Peg Holes: Vintage 2-step hole. 0.34 (8.5mm) bushing-hole diameter. 0.25 (6.5mm) post-hole diameter. Truss Rod Adjustment Location: Heel. 0.84 at first fret. 0.96 at twelfth fret. Wood grain varies from neck to neck. Your neck may differ slightly from what is pictured. All necks may require fret leveling and polish. This is normal and not a defect. To protect against the effects of moisture, we recommend sealing unfinished necks prior to installation.

]]> https://fenderstratocasterneck.com/2024/02/03/new-new-licensed-by-fender-smtf-crf-replacement-neck-for-stratocaster-roasted/feed/ 0 https://fenderstratocasterneck.com/2024/01/04/new-licensed-by-fender-lmf-c-replacement-neck-for-stratocaster-1-piece-maple/ https://fenderstratocasterneck.com/2024/01/04/new-licensed-by-fender-lmf-c-replacement-neck-for-stratocaster-1-piece-maple/#comments Thu, 04 Jan 2024 10:02:04 +0000 https://fenderstratocasterneck.com/2024/01/04/new-licensed-by-fender-lmf-c-replacement-neck-for-stratocaster-1-piece-maple/







Wood grain varies from neck to neck. Your neck may differ slightly from what is pictured.

]]> https://fenderstratocasterneck.com/2024/01/04/new-licensed-by-fender-lmf-c-replacement-neck-for-stratocaster-1-piece-maple/feed/ 0 https://fenderstratocasterneck.com/2023/12/21/new-licensed-by-fender-lmf-70s-replacement-neck-for-stratocaster-1-piece-maple/ https://fenderstratocasterneck.com/2023/12/21/new-licensed-by-fender-lmf-70s-replacement-neck-for-stratocaster-1-piece-maple/#comments Thu, 21 Dec 2023 19:18:25 +0000 https://fenderstratocasterneck.com/2023/12/21/new-licensed-by-fender-lmf-70s-replacement-neck-for-stratocaster-1-piece-maple/







Sprayed with a tinted polyurethane finish, the LMF is ready to installed and put to work!

]]> https://fenderstratocasterneck.com/2023/12/21/new-licensed-by-fender-lmf-70s-replacement-neck-for-stratocaster-1-piece-maple/feed/ 0 https://fenderstratocasterneck.com/2023/07/22/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-soft-v-ebony-snsve/ https://fenderstratocasterneck.com/2023/07/22/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-soft-v-ebony-snsve/#comments Sat, 22 Jul 2023 13:31:05 +0000 https://fenderstratocasterneck.com/2023/07/22/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-soft-v-ebony-snsve/



By Fender® Replacement 22 Fret Neck For Stratocaster® Soft V. Headstock adjust truss rod location and 8.8 mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Truss Rod Adjustment Tool (Not Included). Allen Head Necks = 4mm. Straight Head Necks = Standard Straight Head Screwdriver. 86 inch thick at the first fret. Thick at the 12th fret. Maple w/ Ebony Fingerboard.

]]> https://fenderstratocasterneck.com/2023/07/22/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-soft-v-ebony-snsve/feed/ 0 https://fenderstratocasterneck.com/2023/02/10/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce-3/ https://fenderstratocasterneck.com/2023/02/10/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce-3/#comments Fri, 10 Feb 2023 13:55:57 +0000 https://fenderstratocasterneck.com/2023/02/10/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce-3/


WD® Licensed By Fender® Replacement 22 Fret Neck For Stratocaster® Modern C- MAPLE W/ EBONY FINGERBOARD Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. WD does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that we sell WD does not hand-select necks based on appearance or weight. WD neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required. WD recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Necks”. The seller is “thestratosphere” and is located in this country: US. This item can be shipped worldwide.

• Brand: WD
• Type: Neck

]]> https://fenderstratocasterneck.com/2023/02/10/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce-3/feed/ 0 https://fenderstratocasterneck.com/2022/01/15/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce-2/ https://fenderstratocasterneck.com/2022/01/15/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce-2/#comments Sun, 16 Jan 2022 04:27:34 +0000 https://fenderstratocasterneck.com/2022/01/15/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce-2/


For full item description. Add to Favorite Sellers. Sign up to Newsletter. NEW WD Licensed By Fender 22 Fret NECK For Stratocaster Modern C EBONY SNMCE. WD® Licensed By Fender® Replacement 22 Fret Neck For Stratocaster® Modern C- MAPLE W/ EBONY FINGERBOARD Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. WD does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that we sell WD does not hand-select necks based on appearance or weight. WD neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required. WD recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop. The STRATosphere is best known for offering the largest selection of brand name necks & bodies on the planet. Our customers range from working musicians to repair shops to some of the world’s most famous guitar players. You will receive a notification upon receipt. We are known to be the fastest shippers in the business. You will receive a prompt notification with tracking details. Rest assured we stand 100% behind every single item we sell to you. 112 Crawley Falls Rd Brentwood, NH 03833 That’s it! We want you to come back in the future for all of your guitar parts needs. Thank you so much for your business, we have you covered every single time! View more great items. Fender USA 75th Anniversary Stratocaster Strat NECK C Guitar Parts Maple. Fender American Professional II Stratocaster Strat NECK +TUNERS USA Maple. Fender Vintera 60s Modified Jaguar NECK &TUNERS Modern “C” 9.5 Radius Pau Ferro. 2021 Fender Player Precision P BASS NECK, Bass Guitar Parts, “C” Maple. Sign up for our Newsletter To Get our latest News and Offers. Sign Up Now >. The STRATosphere is not affiliated with Fender Musical Instruments. Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P Bass®, J Bass®, Fender® and the distinctive headstock design of Fender guitars are registered trademarks of Fender® Musical Instruments. The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Necks”. The seller is “thestratosphere” and is located in this country: US. This item can be shipped worldwide.

• Brand: WD
• Type: Neck

]]> https://fenderstratocasterneck.com/2022/01/15/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce-2/feed/ 0 https://fenderstratocasterneck.com/2021/09/18/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce/ https://fenderstratocasterneck.com/2021/09/18/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce/#comments Sat, 18 Sep 2021 22:26:29 +0000 http://fenderstratocasterneck.com/2021/09/18/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce/


WD® Licensed By Fender® Replacement 22 Fret Neck For Stratocaster® Modern C- MAPLE W/ EBONY FINGERBOARD Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. WD does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that we sell WD does not hand-select necks based on appearance or weight. WD neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required. WD recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop. The item “NEW WD Licensed By Fender 22 Fret NECK For Stratocaster Modern C EBONY SNMCE” is in sale since Wednesday, June 16, 2021. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Necks”. The seller is “thestratosphere” and is located in Exeter, New Hampshire. This item can be shipped worldwide.

• Type: Neck
• MPN: Does Not Apply
• Brand: WD

]]> https://fenderstratocasterneck.com/2021/09/18/new-wd-licensed-by-fender-22-fret-neck-for-stratocaster-modern-c-ebony-snmce/feed/ 0