https://fenderstratocasterneck.com Mon, 10 Aug 2026 20:27:46 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2026/08/03/guitar-neck-rosewood-on-q-sawn-roast-maple-24-75-s-style-fits-fender-strat/ https://fenderstratocasterneck.com/2026/08/03/guitar-neck-rosewood-on-q-sawn-roast-maple-24-75-s-style-fits-fender-strat/#comments Mon, 03 Aug 2026 20:05:56 +0000 https://fenderstratocasterneck.com/2026/08/03/guitar-neck-rosewood-on-q-sawn-roast-maple-24-75-s-style-fits-fender-strat/












24.75 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 21 Stainless Steel “Medium/Jumbo” (H. 047″ W. 104″). Mother of Pearl Block (Acrylic). Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 24.75″ Conversion Scale (This neck is meant to convert a 25.5″ scale guitar to 24.75). 904 Thick at 1st fret. 959 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/08/03/guitar-neck-rosewood-on-q-sawn-roast-maple-24-75-s-style-fits-fender-strat/feed/ 0 https://fenderstratocasterneck.com/2026/07/22/guitar-neck-leopardwood-on-sapele-24-75-conv-s-style-fits-fender-strat/ https://fenderstratocasterneck.com/2026/07/22/guitar-neck-leopardwood-on-sapele-24-75-conv-s-style-fits-fender-strat/#comments Wed, 22 Jul 2026 07:22:11 +0000 https://fenderstratocasterneck.com/2026/07/22/guitar-neck-leopardwood-on-sapele-24-75-conv-s-style-fits-fender-strat/







24.75 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 21 Jescar “Medium, Jumbo” Frets. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 24.75″ Conversion Scale (This neck is meant to convert a 25.5″ scale guitar to 24.75). 877 Thick at 1st fret. 948 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/07/22/guitar-neck-leopardwood-on-sapele-24-75-conv-s-style-fits-fender-strat/feed/ 0 https://fenderstratocasterneck.com/2026/07/03/guitar-neck-padouk-on-sapele-24-75-conversion-s-style-fits-fender-strat/ https://fenderstratocasterneck.com/2026/07/03/guitar-neck-padouk-on-sapele-24-75-conversion-s-style-fits-fender-strat/#comments Fri, 03 Jul 2026 06:17:49 +0000 https://fenderstratocasterneck.com/2026/07/03/guitar-neck-padouk-on-sapele-24-75-conversion-s-style-fits-fender-strat/











24.75 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 21 Jescar “Medium, Medium” Frets. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 24.75″ Conversion Scale (This neck is meant to convert a 25.5″ scale guitar to 24.75). 872 Thick at 1st fret. 956 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/07/03/guitar-neck-padouk-on-sapele-24-75-conversion-s-style-fits-fender-strat/feed/ 0 https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/ https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/#comments Sun, 05 Apr 2026 23:15:57 +0000 https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/












25.5 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 3a Roasted Curly Maple. 22 Jescar “Medium, Medium” Frets. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 860 Thick at 1st fret. 947 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/04/05/guitar-neck-3a-roast-curly-maple-on-cherry-s-style-fits-fender-stratocaster/feed/ 0 https://fenderstratocasterneck.com/2026/03/23/guitar-neck-bubinga-on-birdseye-maple-s-style-fits-fender-stratocaster/ https://fenderstratocasterneck.com/2026/03/23/guitar-neck-bubinga-on-birdseye-maple-s-style-fits-fender-stratocaster/#comments Mon, 23 Mar 2026 19:43:49 +0000 https://fenderstratocasterneck.com/2026/03/23/guitar-neck-bubinga-on-birdseye-maple-s-style-fits-fender-stratocaster/











25.5 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 22 Jescar “Medium/Jumbo” Frets. Height. 047 Width. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 864 Thick at 1st fret. 945 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/03/23/guitar-neck-bubinga-on-birdseye-maple-s-style-fits-fender-stratocaster/feed/ 0 https://fenderstratocasterneck.com/2026/03/13/guitar-neck-granadillo-on-curly-maple-24-75-mm-style-fits-fender-stratocaster/ https://fenderstratocasterneck.com/2026/03/13/guitar-neck-granadillo-on-curly-maple-24-75-mm-style-fits-fender-stratocaster/#comments Fri, 13 Mar 2026 07:19:44 +0000 https://fenderstratocasterneck.com/2026/03/13/guitar-neck-granadillo-on-curly-maple-24-75-mm-style-fits-fender-stratocaster/











24.75 Scale MM-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. Quarter Sawn Curly Maple. 21 Jescar “Small/Vintage” Frets. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 24.75″ Conversion Scale (This neck is meant to convert a 25.5″ scale guitar to 24.75). 852 Thick at 1st fret. 956 Thick at 12th fret. 1 lb 2.6 oz. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/03/13/guitar-neck-granadillo-on-curly-maple-24-75-mm-style-fits-fender-stratocaster/feed/ 0 https://fenderstratocasterneck.com/2026/01/10/guitar-neck-granadillo-on-birdseye-maple-s-style-fits-fender-stratocaster/ https://fenderstratocasterneck.com/2026/01/10/guitar-neck-granadillo-on-birdseye-maple-s-style-fits-fender-stratocaster/#comments Sun, 11 Jan 2026 02:15:44 +0000 https://fenderstratocasterneck.com/2026/01/10/guitar-neck-granadillo-on-birdseye-maple-s-style-fits-fender-stratocaster/










25.5 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 22 Jescar “Medium/Jumbo” Frets. Height. 047 Width. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 862 Thick at 1st fret. 943 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2026/01/10/guitar-neck-granadillo-on-birdseye-maple-s-style-fits-fender-stratocaster/feed/ 0 https://fenderstratocasterneck.com/2025/12/13/guitar-neck-zebrawood-on-roasted-maple-s-style-fits-fender-stratocaster/ https://fenderstratocasterneck.com/2025/12/13/guitar-neck-zebrawood-on-roasted-maple-s-style-fits-fender-stratocaster/#comments Sat, 13 Dec 2025 13:14:52 +0000 https://fenderstratocasterneck.com/2025/12/13/guitar-neck-zebrawood-on-roasted-maple-s-style-fits-fender-stratocaster/











25.5 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 21 Jescar “Medium/Jumbo” Frets. Height. 047 Width. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 855 Thick at 1st fret. 941 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2025/12/13/guitar-neck-zebrawood-on-roasted-maple-s-style-fits-fender-stratocaster/feed/ 0 https://fenderstratocasterneck.com/2025/10/26/guitar-neck-fender-stratocaster-22-frets-maple-rose-7/ https://fenderstratocasterneck.com/2025/10/26/guitar-neck-fender-stratocaster-22-frets-maple-rose-7/#comments Sun, 26 Oct 2025 21:02:45 +0000 https://fenderstratocasterneck.com/2025/10/26/guitar-neck-fender-stratocaster-22-frets-maple-rose-7/















Fender Stratocaster 22 Frets Neck. Its sequence number is complete, only processed in the picture! No defects, no maintenance records. Material: Maple Rose Wood. Spec:Modern “C” Shape. 22 Frets medium size. Radius : 9.5 (241mm). Scale Length : 25.5 (648MM). Diameter tuning peg holes : 8mm. Pocket width : 55.5mm. Thickness at neck joint:26mm. Item Pictured Is Actual Item That Will Be Received. United States and European Union.

]]> https://fenderstratocasterneck.com/2025/10/26/guitar-neck-fender-stratocaster-22-frets-maple-rose-7/feed/ 0 https://fenderstratocasterneck.com/2025/10/09/guitar-neck-roasted-curly-on-curly-maple-s-style-fits-fender-stratocaster/ https://fenderstratocasterneck.com/2025/10/09/guitar-neck-roasted-curly-on-curly-maple-s-style-fits-fender-stratocaster/#comments Thu, 09 Oct 2025 08:25:44 +0000 https://fenderstratocasterneck.com/2025/10/09/guitar-neck-roasted-curly-on-curly-maple-s-style-fits-fender-stratocaster/











25.5 Scale S-Style Guitar Neck. We now lightly level the frets of every neck that we sell! The necks we build have always required little, if any, fretwork but this added step will make them even easier to install and set up. Our goal is to produce parts that require no further fretwork in order to build a great playing, comfortable guitar with low action. 21 Jescar “Medium, Medium” Frets. Dual action truss rod with 4mm “Allen Key” Headstock adjustment. 858 Thick at 1st fret. 939 Thick at 12th fret. Walnut Oil (can be removed with mineral spirits). Vintage Thin Nitrocellulose Lacquer Finish. Floyd Rose Nut Route. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain. Proudly Built in the USA. This neck is handmade and not manufactured by Fender®. It is designed to fit most [Stratocaster® / Telecaster® / Precision Bass® / Jazz Bass®]-style instruments built to Fender® specifications. Fender®, Stratocaster®, Telecaster®, Precision Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation. They are used here strictly for descriptive and compatibility purposes only.

]]> https://fenderstratocasterneck.com/2025/10/09/guitar-neck-roasted-curly-on-curly-maple-s-style-fits-fender-stratocaster/feed/ 0