https://fenderstratocasterneck.com Thu, 28 May 2026 04:16:47 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2021/11/26/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j699/ https://fenderstratocasterneck.com/2021/11/26/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j699/#comments Fri, 26 Nov 2021 15:53:27 +0000 https://fenderstratocasterneck.com/2021/11/26/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j699/









This body does not have a finish on it. It has been sanded to 220 grit. This body will fit either an Original Floyd Rose (OFR) or a Gotoh Floyd Rose (GE1996T). The bushing holes are predrilled for OFR style stud bushings (10mm diameter). A Gotoh type Floyd Rose comes with 11mm bushings. We can open up the holes to accept the 11mm Gotoh bushings, but you must message us immediately after purchasing if you need the bushing holes opened up. If you are unsure which bridge you want to use, or forget to message us to open up the bushing holes to accept wider, Gotoh bushings, the Gotoh Floyd Rose will function properly if used with 10mm OFR style bushings. The Stewmac Part # for the 10mm OFR style Studs and bushings is #2155. The use of 32 or 33mm sustain blocks will be required. The stock, 42mm sustain blocks can technically work, however they will stick out of the back of the guitar and you will not be able to use the spring cavity cover. The use of any other bridge other than an Original Floyd Rose or Gotoh Floyd Rose will likely require modifications by a qualified technician to work. Hum Single Single (direct mounted configuration- no pickguard required) Output Jack…………….. 7/8 Side Mount Output Jack Neck Pocket……………. Will accept Fender(tm) Stratocaster Spec, 21/22 fret, 2 3/16″ wide, 25.5″ scale necks Weight……………………. 3 lbs 11 oz All wiring holes are predrilled. No control holes are drilled to allow for customization. Selector switch is cut. Includes complimentary cavity covers (either clear or matte black). If you would prefer black covers, you must message us immediately after ordering. Perle Guitars is proud to offer 100% USA made guitars from all American supplies and wood. The name Fender and corresponding model letters are registered trademarks of FMIC Ltd. Perle Guitars is not affiliated with Fender and presents these terms for fitment purposes only. The item “Alder HSS guitar body fits Fender Strat Stratocaster neck Floyd Rose J699″ is in sale since Monday, September 13, 2021. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Bodies”. The seller is “pcguitars” and is located in Plainfield, Illinois. This item can be shipped worldwide.

• Color: unfinished natural
• To Fit: Electric Guitar
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Material: Alder
• Brand: Unbranded
• Product Type: Bodies
• Model: Strat Stratocaster
• Type: Body

]]> https://fenderstratocasterneck.com/2021/11/26/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j699/feed/ 0 https://fenderstratocasterneck.com/2021/09/12/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j550/ https://fenderstratocasterneck.com/2021/09/12/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j550/#comments Sun, 12 Sep 2021 07:34:59 +0000 http://fenderstratocasterneck.com/2021/09/12/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j550/











This body does not have a finish on it. It has been sanded to 220 grit. This body will fit either an Original Floyd Rose (OFR) or a Gotoh Floyd Rose (GE1996T). The bushing holes are predrilled for OFR style stud bushings (10mm diameter). A Gotoh type Floyd Rose comes with 11mm bushings. We can open up the holes to accept the 11mm Gotoh bushings, but you must message us immediately after purchasing if you need the bushing holes opened up. If you are unsure which bridge you want to use, or forget to message us to open up the bushing holes to accept wider, Gotoh bushings, the Gotoh Floyd Rose will function properly if used with 10mm OFR style bushings. The Stewmac Part # for the 10mm OFR style Studs and bushings is #2155. The use of 32 or 33mm sustain blocks will be required. The stock, 42mm sustain blocks can technically work, however they will stick out of the back of the guitar and you will not be able to use the spring cavity cover. The use of any other bridge other than an Original Floyd Rose or Gotoh Floyd Rose will likely require modifications by a qualified technician to work. Hum Single Single (direct mounted configuration- no pickguard required) Output Jack…………….. 7/8 Side Mount Output Jack Neck Pocket……………. Will accept Fender(tm) Stratocaster Spec, 21/22 fret, 2 3/16″ wide, 25.5″ scale necks Weight……………………. 4 lbs All wiring holes are predrilled. No control holes are drilled to allow for customization. Selector switch is cut. Includes free black cavity covers Perle Guitars is proud to offer 100% USA made guitars from all American supplies and wood. The name Fender and corresponding model letters are registered trademarks of FMIC Ltd. Perle Guitars is not affiliated with Fender and presents these terms for fitment purposes only. The item “Alder HSS guitar body fits Fender Strat Stratocaster neck Floyd Rose J550″ is in sale since Friday, May 21, 2021. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Bodies”. The seller is “pcguitars” and is located in Plainfield, Illinois. This item can be shipped worldwide.

• Color: unfinished natural
• To Fit: Electric Guitar
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Material: Alder
• Brand: Unbranded
• Product Type: Bodies
• Type: Body
• Model: HSS strat

]]> https://fenderstratocasterneck.com/2021/09/12/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j550/feed/ 0 https://fenderstratocasterneck.com/2021/09/08/alder-hss-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j627/ https://fenderstratocasterneck.com/2021/09/08/alder-hss-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j627/#comments Wed, 08 Sep 2021 06:47:52 +0000 http://fenderstratocasterneck.com/2021/09/08/alder-hss-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j627/










This body does not have a finish on it. It has been sanded to 220 grit. Hum Single Single- Front Routed Configuration Output Jack…………….. Strat Style Output Jack Neck Pocket……………. Will accept Fender(tm) Stratocaster Spec, 21/22 fret, 2 3/16″ wide, 25.5″ scale necks Weight……………………. 4 lbs 4 oz All wiring holes are predrilled. Perle Guitars is proud to offer 100% USA made guitars from all American supplies and wood. The name Fender and corresponding model letters are registered trademarks of FMIC Ltd. Perle Guitars is not affiliated with Fender and presents these terms for fitment purposes only. The item “Alder HSS Hardtail guitar body fits Fender Strat Stratocaster necks J627″ is in sale since Friday, July 16, 2021. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Bodies”. The seller is “pcguitars” and is located in Plainfield, Illinois. This item can be shipped worldwide.

• Color: unfinished natural
• To Fit: Electric Guitar
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Material: Alder
• Brand: Unbranded
• Product Type: Bodies
• Type: Body
• Model: strat

]]> https://fenderstratocasterneck.com/2021/09/08/alder-hss-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j627/feed/ 0 https://fenderstratocasterneck.com/2021/07/31/alder-hxh-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j290/ https://fenderstratocasterneck.com/2021/07/31/alder-hxh-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j290/#comments Sat, 31 Jul 2021 11:34:20 +0000 http://fenderstratocasterneck.com/2021/07/31/alder-hxh-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j290/










This body does not have a finish on it. It has been sanded to 220 grit. Gotoh Strat Style Hardtail Bridge – String through body configuration. Hum, x, Hum – This particular body is designed to have the pickups mounted from the back side of the body. No pickguard or mounting rings are needed! 7/8 side mount output jack Neck Pocket…………….. Will accept Fender(tm) Stratocaster Spec, 21/22 fret, 2 3/16″ wide, 25.5″ scale necks Weight……………………. 3 lbs 10 oz All wiring holes are predrilled. Includes free black cavity covers. Perle Guitars is proud to offer 100% USA made guitars from all American supplies and wood. The name Fender and corresponding model letters are registered trademarks of FMIC Ltd. Perle Guitars is not affiliated with Fender and presents these terms for fitment purposes only. The item “Alder HxH Hardtail guitar body fits Fender Strat Stratocaster necks J290″ is in sale since Sunday, September 20, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Bodies”. The seller is “pcguitars” and is located in Plainfield, Illinois. This item can be shipped worldwide.

• To Fit: Electric Guitar
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Brand: Unbranded
• Product Type: Bodies

]]> https://fenderstratocasterneck.com/2021/07/31/alder-hxh-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j290/feed/ 0 https://fenderstratocasterneck.com/2021/07/18/alder-hxh-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j353/ https://fenderstratocasterneck.com/2021/07/18/alder-hxh-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j353/#comments Sun, 18 Jul 2021 11:05:01 +0000 http://fenderstratocasterneck.com/2021/07/18/alder-hxh-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j353/











This body does not have a finish on it. It has been sanded to 220 grit. Gotoh Strat Style Hardtail Bridge – String through body configuration. Hum, x, Hum – This particular body is designed to have the pickups mounted from the back side of the body. No pickguard or mounting rings are needed! 7/8 side mount output jack Neck Pocket…………….. Will accept Fender(tm) Stratocaster Spec, 21/22 fret, 2 3/16″ wide, 25.5″ scale necks Weight……………………. 3 lbs 11 oz All wiring holes are predrilled. Includes free black cavity covers. Perle Guitars is proud to offer 100% USA made guitars from all American supplies and wood. The name Fender and corresponding model letters are registered trademarks of FMIC Ltd. Perle Guitars is not affiliated with Fender and presents these terms for fitment purposes only. The item “Alder HxH Hardtail guitar body fits Fender Strat Stratocaster necks J353″ is in sale since Thursday, October 29, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Bodies”. The seller is “pcguitars” and is located in Plainfield, Illinois. This item can be shipped worldwide.

• Color: natural – no finish
• To Fit: Electric Guitar
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Material: Alder
• Brand: Unbranded
• Product Type: Bodies
• Type: Body

]]> https://fenderstratocasterneck.com/2021/07/18/alder-hxh-hardtail-guitar-body-fits-fender-strat-stratocaster-necks-j353/feed/ 0 https://fenderstratocasterneck.com/2021/05/26/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j147/ https://fenderstratocasterneck.com/2021/05/26/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j147/#comments Thu, 27 May 2021 03:28:29 +0000 http://fenderstratocasterneck.com/2021/05/26/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j147/










This guitar has a unique, multicolor swirl paint job. Due to the nature of the painting process, and the basic sealer coat, there is texture to the finish. Additional work will be needed if you require a perfect, show-room finish. Clear coating services are available if you require a perfect finish and do not have the resources to complete it yourself (please message for details). If you are on a budget and are willing to accept an imperfect finish, the body can be assembled as-is and still have the artwork protected. This body will fit either an Original Floyd Rose (OFR) or a Gotoh Floyd Rose (GE1996T). The bushing holes are predrilled for OFR style stud bushings (10mm diameter). A Gotoh type Floyd Rose comes with 11mm bushings. We can open up the holes to accept the 11mm Gotoh bushings, but you must message us immediately after purchasing if you need the bushing holes opened up. If you are unsure which bridge you want to use, or forget to message us to open up the bushing holes to accept wider, Gotoh bushings, the Gotoh Floyd Rose will function properly if used with 10mm OFR style bushings. The Stewmac Part # for the 10mm OFR style Studs and bushings is #2155. The use of 32 or 33mm sustain blocks will be required. The stock, 42mm sustain blocks can technically work, however they will stick out of the back of the guitar and you will not be able to use the spring cavity cover. The use of any other bridge other than an Original Floyd Rose or Gotoh Floyd Rose will likely require modifications by a qualified technician to work. Hum Single Single (direct mounted configuration- no pickguard required) Output Jack…………….. 7/8 Side Mount Output Jack Neck Pocket……………. Will accept Fender(tm) Stratocaster Spec, 21/22 fret, 2 3/16″ wide, 25.5″ scale necks Weight……………………. 3 lbs 14 oz All wiring holes are predrilled. Includes free black cavity covers Perle Guitars is proud to offer 100% USA made guitars from all American supplies and wood. The name Fender and corresponding model letters are registered trademarks of FMIC Ltd. Perle Guitars is not affiliated with Fender and presents these terms for fitment purposes only. The item “Alder HSS guitar body fits Fender Strat Stratocaster neck Floyd Rose J147″ is in sale since Friday, January 24, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Bodies”. The seller is “pcguitars” and is located in Plainfield, Illinois. This item can be shipped worldwide.

• Product Type: Bodies
• Brand: Unbranded
• Type: Body
• To Fit: Electric Guitar
• MPN: Does Not Apply
• Country/Region of Manufacture: United States

]]> https://fenderstratocasterneck.com/2021/05/26/alder-hss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j147/feed/ 0 https://fenderstratocasterneck.com/2021/05/20/alder-sss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j168/ https://fenderstratocasterneck.com/2021/05/20/alder-sss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j168/#comments Thu, 20 May 2021 14:12:55 +0000 http://fenderstratocasterneck.com/2021/05/20/alder-sss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j168/











This guitar has a unique, multicolor paint job. Due to the nature of the painting process, and the basic sealer coat, there is texture to the finish. Additional work will be needed if you require a perfect, show-room finish. Clear coating services are available if you require a perfect finish and do not have the resources to complete it yourself (please message for details). If you are on a budget and are willing to accept an imperfect finish, the body can be assembled as-is and still have the artwork protected. This body will fit either an Original Floyd Rose (OFR) or a Gotoh Floyd Rose (GE1996T). The bushing holes are predrilled for OFR style stud bushings (10mm diameter). A Gotoh type Floyd Rose comes with 11mm bushings. We can open up the holes to accept the 11mm Gotoh bushings, but you must message us immediately after purchasing if you need the bushing holes opened up. If you are unsure which bridge you want to use, or forget to message us to open up the bushing holes to accept wider, Gotoh bushings, the Gotoh Floyd Rose will function properly if used with 10mm OFR style bushings. The Stewmac Part # for the 10mm OFR style Studs and bushings is #2155. The use of 32 or 33mm sustain blocks will be required. The stock, 42mm sustain blocks can technically work, however they will stick out of the back of the guitar and you will not be able to use the spring cavity cover. The use of any other bridge other than an Original Floyd Rose or Gotoh Floyd Rose will likely require modifications by a qualified technician to work. Single Single Single (direct mounted configuration- no pickguard required) Output Jack…………….. 7/8 Side Mount Output Jack Neck Pocket……………. Will accept Fender(tm) Stratocaster Spec, 21/22 fret, 2 3/16″ wide, 25.5″ scale necks Weight……………………. 4 lbs 4 oz All wiring holes are predrilled. Includes free black cavity covers Perle Guitars is proud to offer 100% USA made guitars from all American supplies and wood. The name Fender and corresponding model letters are registered trademarks of FMIC Ltd. Perle Guitars is not affiliated with Fender and presents these terms for fitment purposes only. The item “Alder SSS guitar body fits Fender Strat Stratocaster neck Floyd Rose J168″ is in sale since Thursday, February 13, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Bodies”. The seller is “pcguitars” and is located in Plainfield, Illinois. This item can be shipped worldwide.

• Product Type: Bodies
• Brand: Unbranded
• Type: Body
• To Fit: Electric Guitar
• MPN: Does Not Apply
• Country/Region of Manufacture: United States

]]> https://fenderstratocasterneck.com/2021/05/20/alder-sss-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j168/feed/ 0 https://fenderstratocasterneck.com/2021/05/17/alder-hxs-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j309/ https://fenderstratocasterneck.com/2021/05/17/alder-hxs-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j309/#comments Mon, 17 May 2021 13:56:44 +0000 http://fenderstratocasterneck.com/2021/05/17/alder-hxs-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j309/













This guitar has a unique, multicolor paint job. Due to the nature of the painting process, and the basic sealer coat, there is texture to the finish. Additional work will be needed if you require a perfect, show-room finish. Clear coating services are available if you require a perfect finish and do not have the resources to complete it yourself (please message for details). If you are on a budget and are willing to accept an imperfect finish, the body can be assembled as-is and still have the artwork protected. This body will fit either an Original Floyd Rose (OFR) or a Gotoh Floyd Rose (GE1996T). The bushing holes are predrilled for OFR style stud bushings (10mm diameter). A Gotoh type Floyd Rose comes with 11mm bushings. We can open up the holes to accept the 11mm Gotoh bushings, but you must message us immediately after purchasing if you need the bushing holes opened up. If you are unsure which bridge you want to use, or forget to message us to open up the bushing holes to accept wider, Gotoh bushings, the Gotoh Floyd Rose will function properly if used with 10mm OFR style bushings. The Stewmac Part # for the 10mm OFR style Studs and bushings is #2155. The use of 32 or 33mm sustain blocks will be required. The stock, 42mm sustain blocks can technically work, however they will stick out of the back of the guitar and you will not be able to use the spring cavity cover. The use of any other bridge other than an Original Floyd Rose or Gotoh Floyd Rose will likely require modifications by a qualified technician to work. Hum x Single (direct mounted configuration- no pickguard required) Output Jack…………….. 7/8 Side Mount Output Jack Neck Pocket……………. Will accept Fender(tm) Stratocaster Spec, 21/22 fret, 2 3/16″ wide, 25.5″ scale necks Weight……………………. 4 lbs 5 oz. All wiring holes are predrilled. Includes free black cavity covers Perle Guitars is proud to offer 100% USA made guitars from all American supplies and wood. The name Fender and corresponding model letters are registered trademarks of FMIC Ltd. Perle Guitars is not affiliated with Fender and presents these terms for fitment purposes only. The item “Alder HxS guitar body fits Fender Strat Stratocaster neck Floyd Rose J309″ is in sale since Thursday, October 1, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Bodies”. The seller is “pcguitars” and is located in Plainfield, Illinois. This item can be shipped worldwide.

• To Fit: Electric Guitar
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Brand: Unbranded
• Product Type: Bodies

]]> https://fenderstratocasterneck.com/2021/05/17/alder-hxs-guitar-body-fits-fender-strat-stratocaster-neck-floyd-rose-j309/feed/ 0