https://fenderstratocasterneck.com Sun, 03 May 2026 02:09:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/#comments Fri, 01 Mar 2024 04:33:05 +0000 https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/













This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. For now I only have the 2 pcs available (60’s 59’s).

]]> https://fenderstratocasterneck.com/2024/02/29/60s-stratocaster-neck-to-order-vintage-fender-specs-custom-order/feed/ 0 https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/ https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/#comments Sat, 17 Feb 2024 03:34:46 +0000 https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/













This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall). 0.79″ at first fret to 0.99″ at 12th fret (your choice of thickness). 9.50″ or 7.25″ fretboard radius. 2.20 neck heel width. 1/4″ X 11/32″ two step tuning pegs holes. Vintage single acting truss rod with the correct nut. Oval C, large C, soft V or hard V profile. Frets are polished, leveled and rounded edges. This is a custom neck made by hand with high quality materials. You place the order and can message me to discuss the vintage specs you want. The construction takes around 4 weeks. I construct this kind of necks following the vintage Fender specs the best I can. If you want a custom made vintage style neck, message me. For now I only have the 2 pcs available (60’s 59’s).

]]> https://fenderstratocasterneck.com/2024/02/16/60s-telecaster-stratocaster-neck-to-order-vintage-fender-specs-custom-order/feed/ 0