25.5 (64.77 cm). Fingerboard Radius 9.5 (305 mm). 1.685 (42.8 mm). Dual Action, Head Adjust. This is not an OEM Fender/Charvel product. It is an aftermarket replacement part. As with all of my aftermarket bolt on necks and bodies, this has the standard Fender 2 3/16 neck heel width and neck pocket. It will fit…
Continue readingcustom
2017 18 Fender Custom Shop 1959 Stratocaster Limited Heavy Relic Guitar Of The Day
Allparts Custom Relic Telecaster Rosewood 21 fret 9.5 C Shape
They only come once in while these custom unique job! Allparts Custom Shop Relic Telecaster Rosewood 21 fret 9.5 C Shape. Will fit Fender and MJT.
Continue reading50’s 60’s 70’s Stratocaster neck To Order vintage Fender specs custom order
This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall)….
Continue readingMA6 Fender Stratocaster Custom Shop Neck Mighty Mite Fret Maple Guitar with Tuners
Hello, You are viewing a listing for a. This listing is for a preowned Mighty Mite Fender Guitar Neck and ready to attach to your guitar body. The model of guitar it was made for is a Stratocaster. The neck will come with the lock down nuts as well as the tuners on the headstock….
Continue reading63-64 Stratocaster neck Fender decal Custom Made ebony fb MoP dots AAA Flame
This listing is a custom neck made by hand following the Fender standard. The finish is nitro, thin skin. Round laminated Ebony fretboard veneer. 7mm face Mother of pearl dots also the side dots. Stemac #152 Fret wire (similar to dunlop 6105 but not that tall). 0.86 at first fret. 0.95 at 12th fret. 9.5…
Continue reading60’s Stratocaster neck To Order vintage Fender specs custom order
This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall)….
Continue reading60’s Telecaster-Stratocaster neck To Order vintage Fender specs custom order
This is a listing to Order a vintage reissue made by hand following the Fender standard. The finish is nitro. Hard rock maple flat sawn cut. Slab or veneer rosewood fretboard. 1/4face clay dots, or 7mm abalone, Mother of pearl. 2mm or 2.5mm side dots. Med Jumbo, vintage or Dunlop 6105 frets (narrow and tall)….
Continue readingCustom made Scalloped Strat Neck fits fender Stratocaster body 22frets
Hand built project neck. Fret leveling may be needed as fretboard may deform a little bit due to humidity/temperature change. Heel size: 55.1mm.
Continue readingUSA Fender Custom Shop Jeff Beck NOS Stratocaster NECK TUNERS Strat Rosewood
Description: Official USA Fender Custom Shop Jeff Beck NOS Stratocaster Neck & Tuners- Maple w/ Rosewood Fingerboard- Thin “C” Shape- 9.5″ (241 mm)Radius- 22 Medium Jumbo Frets- 25.5″ (648 mm) Scale Length- 1.6875 (42.86 mm) Nut Width- Satin Urethane Finish- Genuine Fender Condition: Mint Country/Make: United States- American Serial #: 16101Comments: We have included a…
Continue reading